I am having problem using keyboard under XFree86 4.5.0 (same thing
in Xorg 6.[89].x), running FreeBSD 6.1-PRERELEASE (from April 3,
2006) on Dell Inspiron 5000e laptop, ATI Rage 128 Mobility M3 card.
(With FreeBSD 4.11 & XFree86 4.3, i did not have any problem with
the keyboard in X.)

Mouse works just dandy. Quiting from a window manager (being run in
the foreground) exits from X normally. If i explicitly kill X
server, machine locks, and am logged out of already running ssh
session.

Problem with the keyboard is as soon as i press [Enter] (there are a
few more keys) in xterm, X dies, bringing me to the console on which
"startx" was issued. Also, Ctrl-Alt-BS does not kill the server;
while typing in the xterm window, no characters are echoed. Changed
shells w/o leading to any progress.

After quitting X -- either by pressing [Enter], via window manager
menu, or explicitly killing X -- undecipherable characters appear on
the console.

I have removed my .Xdefaults, .Xresources, .xsession, any special
shell prompt. In /etc/X11/{xorg.conf,XF86Config}, tried without
dri, GLcore, and with "NoAccel" options to no success. Usable
keyboard was still missing when i tried my XF86Config from XFree86
4.3 days, or those generated by xf86config or xorg equivalent.

Current XF86Config and XFree86 log are listed below. These are also
available from ...

http://www103.pair.com/parv/etc/prob...ke/2006-04-27/


Could anybody suggest anything that i have not tried yet?


- Parv


XF86Config (removed some of the comments & commented out lines) ...

# File generated by xf86config.

# Copyright (c) 1999 by The XFree86 Project, Inc.

Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the Type1 and FreeType font modules
Load "type1"
Load "speedo"
Load "freetype"
# Load "xtt"

# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"

EndSection

Section "Files"

RgbPath "/usr/X11R6/lib/X11/rgb"

FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

EndSection

Section "ServerFlags"

# Option "NoTrapSignals"
# Option "DontVTSwitch"
# Option "DontZap"
# Option "Dont Zoom"
# Option "DisableVidModeExtension"
# Option "AllowNonLocalXvidtune"
# Option "DisableModInDev"
# Option "AllowNonLocalModInDev"

EndSection

Section "InputDevice"

Identifier "Keyboard1"
Driver "Keyboard"

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
Option "XkbOptions" "ctrl:nocaps,caps:shift"

EndSection

Section "InputDevice"

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/sysmouse"


Option "Emulate3Buttons"
Option "Emulate3Timeout" "100"

EndSection

Section "Monitor"

Identifier "Hitachi"

HorizSync 20-200

VertRefresh 40-150

EndSection

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.

# BusID "PCI:0:10:0"

EndSection

# Device configured by xf86config:

Section "Device"
Identifier "** ATI Rage 128 based (generic) [r128]"
Driver "r128"
#VideoRam 8192
# Insert Clocks lines here if appropriate
EndSection

Section "Screen"
Identifier "Screen 1"
Device "** ATI Rage 128 based (generic) [r128]"
Monitor "Hitachi"
DefaultDepth 16

Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection

Section "ServerLayout"

# The Identifier line must be present
Identifier "Simple Layout"

Screen "Screen 1"

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
# Mode 0666
# EndSection


XFree86.0.log ...

XFree86 Version 4.5.0
Release Date: 16 March 2005
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 6.1 i386 [ELF]
Current Operating System: FreeBSD moo.holy.cow 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #5: Mon Apr 3 23:39:40 EDT 2006 root@moo.holy.cow:/work/obj/misc/src-6/sys/Dell-I5Ke i386
Build Date: 3 April 2006
Changelog Date: 17 March 2005
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Command line: X :0 -nolisten tcp
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (EE) error, (WW) warning,
(II) informational, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Apr 7 21:17:36 2006
(==) Using config file: "/etc/X11/XF86Config".
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.3
XFree86 Video Driver: 0.8
XFree86 XInput driver : 0.5
XFree86 Server Extension : 0.3
XFree86 Font Renderer : 0.5
(II) Loader running on freebsd
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(**) Option "XkbOptions" "ctrl:nocaps,caps:shift"
(**) XKB: options: "ctrl:nocaps,caps:shift"
(==) Keyboard: CustomKeycode disabled.
(==) ServerLayout "Simple Layout"
(==) |-->Screen "Screen 1" (0) (0, 0)
(**) | |-->Device "** ATI Rage 128 based (generic) [r128]"
(**) | |-->Monitor "Hitachi" (0)
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) "fonts.dir" not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/").
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/misc/local/lib/modules"
(II) Checking for unused ServerFlags options:
(II) LoadModule: "pcidata"
(II) Loading /misc/local/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.8
(II) LoadModule: "bitmap"
(II) Loading /misc/local/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.5
(II) Loading font Bitmap
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 1

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:04:0: chip 104c,ac1c card fffc,ffff rev 01 class 06,07,00 hdr 82
(II) PCI: 00:04:1: chip 104c,ac1c card fffc,ffff rev 01 class 06,07,00 hdr 82
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,80,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 03 class 06,80,00 hdr 00
(II) PCI: 00:08:0: chip 125d,1978 card 1028,00cc rev 10 class 04,01,00 hdr 00
(II) PCI: 00:10:0: chip 11c1,0448 card 1668,2000 rev 01 class 07,80,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4c46 card 1028,00cc rev 02 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x008c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[B]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xf4100000 - 0xf41fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:4:0), (0,2,3), BCTRL: 0x0740 (VGA_EN is cleared)
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (0:4:1), (0,4,5), BCTRL: 0x0740 (VGA_EN is cleared)
(--) PCI:*(1:0:0) ATI Technologies Inc Rage Mobility M3 AGP 2x rev 2, Mem @ 0xf8000000/26, 0xf4100000/14, I/O @ 0x2000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xffffffff to 0xdfffffff
(II) PCI Memory resource overlap reduced 0xf4000000 from 0xf7ffffff to 0xf40fffff
(II) Active PCI resource ranges:
[0] -1 0 0xf4000000 - 0xf40fffff (0x100000) MX[B]E
[1] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
[2] -1 0 0xf4100000 - 0xf4103fff (0x4000) MX[B](B)
[3] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[4] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[5] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]E
[6] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[7] -1 0 0x00001060 - 0x0000107f (0x20) IX[B]E
[8] -1 0 0x00001050 - 0x0000105f (0x10) IX[B]E
[9] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf4000000 - 0xf40fffff (0x100000) MX[B]E
[1] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
[2] -1 0 0xf4100000 - 0xf4103fff (0x4000) MX[B](B)
[3] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[4] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[5] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]E
[6] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[7] -1 0 0x00001060 - 0x0000107f (0x20) IX[B]E
[8] -1 0 0x00001050 - 0x0000105f (0x10) IX[B]E
[9] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf4000000 - 0xf40fffff (0x100000) MX[B]E
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
[7] -1 0 0xf4100000 - 0xf4103fff (0x4000) MX[B](B)
[8] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[12] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]E
[13] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[14] -1 0 0x00001060 - 0x0000107f (0x20) IX[B]E
[15] -1 0 0x00001050 - 0x0000105f (0x10) IX[B]E
[16] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /misc/local/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /misc/local/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /misc/local/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.5
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "speedo"
(II) Loading /misc/local/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.5
(II) Loading font Speedo
(II) LoadModule: "freetype"
(II) Loading /misc/local/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project & the After X-TT Project"
compiled for 4.5.0, module version = 2.1.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "r128"
(II) Loading /misc/local/lib/modules/drivers/r128_drv.o
(II) Module r128: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 4.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.8
(II) LoadModule: "ati"
(II) Loading /misc/local/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 6.5.12
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.8
(II) LoadModule: "mouse"
(II) Loading /misc/local/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.5
(II) ATI: ATI driver (version 6.5.12) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon 9200PRO 5960 (AGP), ATI Radeon 9200 5961 (AGP),
ATI Radeon 9200 5962 (AGP), ATI Radeon 9200SE 5964 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP), ATI Radeon Mobility 9600 (M10) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2 (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Rage 128 Mobility M3 LF (AGP) found
(II) Loading sub module "r128"
(II) LoadModule: "r128"
(II) Reloading /misc/local/lib/modules/drivers/r128_drv.o
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf4000000 - 0xf40fffff (0x100000) MX[B]E
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
[7] -1 0 0xf4100000 - 0xf4103fff (0x4000) MX[B](B)
[8] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[12] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]E
[13] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[14] -1 0 0x00001060 - 0x0000107f (0x20) IX[B]E
[15] -1 0 0x00001050 - 0x0000105f (0x10) IX[B]E
[16] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf4000000 - 0xf40fffff (0x100000) MX[B]E
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
[7] -1 0 0xf4100000 - 0xf4103fff (0x4000) MX[B](B)
[8] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[15] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]E
[16] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[17] -1 0 0x00001060 - 0x0000107f (0x20) IX[B]E
[18] -1 0 0x00001050 - 0x0000105f (0x10) IX[B]E
[19] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
[20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /misc/local/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.8
(II) R128(0): PCI bus 1 card 0 func 0
(**) R128(0): Depth 16, (--) framebuffer bpp 16
(II) R128(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(==) R128(0): RGB weight 565
(II) R128(0): Using 6 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /misc/local/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.8
(II) R128(0): initializing int10
(==) R128(0): Write-combining range (0xa0000,0x20000) was already clear
(==) R128(0): Write-combining range (0xc0000,0x40000) was already clear
(II) R128(0): Primary V_BIOS segment is: 0xc000
(==) R128(0): Write-combining range (0x0,0x1000) was already clear
(--) R128(0): Chipset: "ATI Rage 128 Mobility M3 LF (AGP)" (ChipID = 0x4c46)
(--) R128(0): Linear framebuffer at 0xf8000000
(--) R128(0): MMIO registers at 0xf4100000
(==) R128(0): Write-combining range (0xf4100000,0x4000) was already clear
(--) R128(0): VideoRAM: 8192 kByte (128-bit SDR SGRAM 1:1)
(**) R128(0): Using flat panel for display
(II) R128(0): Panel size: 1024x768
(II) R128(0): Panel ID: Hitachi TX38D87VC1CAA
(II) R128(0): Panel Type: Color, Single, TFT
(II) R128(0): Panel Interface: LVDS
(II) R128(0): PLL parameters: rf=2700 rd=60 min=12500 max=25000; xclk=10500
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /misc/local/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.8
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /misc/local/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.8
(II) R128(0): VESA BIOS detected
(II) R128(0): VESA VBE Version 2.0
(II) R128(0): VESA VBE Total Mem: 8192 kB
(II) R128(0): VESA VBE OEM: ATI MOBILE M3
(II) R128(0): VESA VBE OEM Software Rev: 1.0
(II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) R128(0): VESA VBE OEM Product: M3
(II) R128(0): VESA VBE OEM Product Rev: 01.00
(II) R128(0): VESA VBE Capabilities: 0x00000001
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /misc/local/lib/modules/libddc.a
(II) R128(0): VESA VBE DDC supported
(II) R128(0): VESA VBE DDC Level none
(II) R128(0): VESA VBE DDC transfer in appr. 2 sec.
(II) R128(0): VESA VBE DDC read failed
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) R128(0): Hitachi: Using hsync range of 20.00-200.00 kHz
(II) R128(0): Hitachi: Using vrefresh range of 40.00-150.00 Hz
(II) R128(0): Clock range: 12.50 to 250.00 MHz
(II) R128(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "720x400" (no mode of this name)
(II) R128(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1152x864" (no mode of this name)
(II) R128(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x960" (no mode of this name)
(II) R128(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x960" (no mode of this name)
(II) R128(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x1024" (no mode of this name)
(II) R128(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x1024" (no mode of this name)
(II) R128(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x1024" (no mode of this name)
(II) R128(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1792x1344" (no mode of this name)
(II) R128(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1856x1392" (no mode of this name)
(II) R128(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1440" (no mode of this name)
(II) R128(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "832x624" (no mode of this name)
(II) R128(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1152x768" (no mode of this name)
(II) R128(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1152x864" (no mode of this name)
(II) R128(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1400x1050" (no mode of this name)
(II) R128(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1400x1050" (no mode of this name)
(II) R128(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1024" (no mode of this name)
(II) R128(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using mode "1280x1024" (no mode of this name)
(II) R128(0): Modifying mode according to VBIOS: 1024x768 [pclk 94.5 MHz] for FP to: 1024x768 [pclk 65.0 MHz]
(II) R128(0): Modifying mode according to VBIOS: 800x600 [pclk 56.3 MHz] for FP to: 800x600 [pclk 65.0 MHz]
(II) R128(0): Modifying mode according to VBIOS: 640x480 [pclk 36.0 MHz] for FP to: 640x480 [pclk 65.0 MHz]
(II) R128(0): Modifying mode according to VBIOS: 1024x768 [pclk 78.8 MHz] for FP to: 1024x768 [pclk 65.0 MHz]
(II) R128(0): Modifying mode according to VBIOS: 1024x768 [pclk 75.0 MHz] for FP to: 1024x768 [pclk 65.0 MHz]
(II) R128(0): Modifying mode according to VBIOS: 1024x768 [pclk 65.0 MHz] for FP to: 1024x768 [pclk 65.0 MHz]
(II) R128(0): Modifying mode according to VBIOS: 800x600 [pclk 49.5 MHz] for FP to: 800x600 [pclk 65.0 MHz]
(II) R128(0): Modifying mode according to VBIOS: 800x600 [pclk 50.0 MHz] for FP to: 800x600 [pclk 65.0 MHz]
(II) R128(0): Modifying mode according to VBIOS: 800x600 [pclk 40.0 MHz] for FP to: 800x600 [pclk 65.0 MHz]
(II) R128(0): Modifying mode according to VBIOS: 800x600 [pclk 36.0 MHz] for FP to: 800x600 [pclk 65.0 MHz]
(II) R128(0): Modifying mode according to VBIOS: 640x480 [pclk 31.5 MHz] for FP to: 640x480 [pclk 65.0 MHz]
(II) R128(0): Modifying mode according to VBIOS: 640x480 [pclk 31.5 MHz] for FP to: 640x480 [pclk 65.0 MHz]
(II) R128(0): Modifying mode according to VBIOS: 640x480 [pclk 25.2 MHz] for FP to: 640x480 [pclk 65.0 MHz]
(II) R128(0): Modifying mode according to VBIOS: 640x400 [pclk 31.5 MHz] for FP to: 640x400 [pclk 65.0 MHz]
(II) R128(0): Modifying mode according to VBIOS: 640x350 [pclk 31.5 MHz] for FP to: 640x350 [pclk 65.0 MHz]
(--) R128(0): Virtual size is 1024x768 (pitch 1024)
(**) R128(0): *Default mode "1024x768": 65.0 MHz (scaled from 94.5 MHz), 68.7 kHz, 85.0 Hz
(II) R128(0): Modeline "1024x768" 65.00 1024 1048 1065 1344 768 770 776 806 +hsync +vsync
(**) R128(0): *Default mode "800x600": 65.0 MHz (scaled from 56.3 MHz), 53.7 kHz, 85.1 Hz
(II) R128(0): Modeline "800x600" 65.00 800 824 841 1120 600 602 608 638 +hsync +vsync
(**) R128(0): *Default mode "640x480": 65.0 MHz (scaled from 36.0 MHz), 43.3 kHz, 85.0 Hz
(II) R128(0): Modeline "640x480" 65.00 640 664 681 960 480 482 488 518 -hsync -vsync
(**) R128(0): Default mode "1024x768": 65.0 MHz (scaled from 78.8 MHz), 60.1 kHz, 75.1 Hz
(II) R128(0): Modeline "1024x768" 65.00 1024 1048 1065 1344 768 770 776 806 +hsync +vsync
(**) R128(0): Default mode "1024x768": 65.0 MHz (scaled from 75.0 MHz), 56.5 kHz, 70.1 Hz
(II) R128(0): Modeline "1024x768" 65.00 1024 1048 1065 1344 768 770 776 806 -hsync -vsync
(**) R128(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) R128(0): Modeline "1024x768" 65.00 1024 1048 1065 1344 768 770 776 806 -hsync -vsync
(**) R128(0): Default mode "800x600": 65.0 MHz (scaled from 49.5 MHz), 46.9 kHz, 75.0 Hz
(II) R128(0): Modeline "800x600" 65.00 800 824 841 1120 600 602 608 638 +hsync +vsync
(**) R128(0): Default mode "800x600": 65.0 MHz (scaled from 50.0 MHz), 48.1 kHz, 72.2 Hz
(II) R128(0): Modeline "800x600" 65.00 800 824 841 1120 600 602 608 638 +hsync +vsync
(**) R128(0): Default mode "800x600": 65.0 MHz (scaled from 40.0 MHz), 37.9 kHz, 60.3 Hz
(II) R128(0): Modeline "800x600" 65.00 800 824 841 1120 600 602 608 638 +hsync +vsync
(**) R128(0): Default mode "800x600": 65.0 MHz (scaled from 36.0 MHz), 35.2 kHz, 56.2 Hz
(II) R128(0): Modeline "800x600" 65.00 800 824 841 1120 600 602 608 638 +hsync +vsync
(**) R128(0): Default mode "640x480": 65.0 MHz (scaled from 31.5 MHz), 37.5 kHz, 75.0 Hz
(II) R128(0): Modeline "640x480" 65.00 640 664 681 960 480 482 488 518 -hsync -vsync
(**) R128(0): Default mode "640x480": 65.0 MHz (scaled from 31.5 MHz), 37.9 kHz, 72.8 Hz
(II) R128(0): Modeline "640x480" 65.00 640 664 681 960 480 482 488 518 -hsync -vsync
(**) R128(0): Default mode "640x480": 65.0 MHz (scaled from 25.2 MHz), 31.5 kHz, 60.0 Hz
(II) R128(0): Modeline "640x480" 65.00 640 664 681 960 480 482 488 518 -hsync -vsync
(**) R128(0): Default mode "640x400": 65.0 MHz (scaled from 31.5 MHz), 37.9 kHz, 85.1 Hz
(II) R128(0): Modeline "640x400" 65.00 640 664 681 960 400 402 408 438 -hsync +vsync
(**) R128(0): Default mode "640x350": 65.0 MHz (scaled from 31.5 MHz), 37.9 kHz, 85.1 Hz
(II) R128(0): Modeline "640x350" 65.00 640 664 681 960 350 352 358 388 +hsync -vsync
(==) R128(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /misc/local/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /misc/local/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.8
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /misc/local/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.8
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /misc/local/lib/modules/libshadowfb.a
(II) Module shadowfb: vendor="The XFree86 Project"
compiled for 4.5.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.3
(II) R128(0): Page flipping disabled
(==) R128(0): Write-combining range (0x0,0x1000) was already clear
(!!) R128(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf4100000 - 0xf4103fff (0x4000) MS[B]
[1] 0 0 0xf8000000 - 0xfbffffff (0x4000000) MS[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xf4000000 - 0xf40fffff (0x100000) MX[B]E
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
[9] -1 0 0xf4100000 - 0xf4103fff (0x4000) MX[B](B)
[10] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[14] 0 0 0x00002000 - 0x000020ff (0x100) IS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[18] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]E
[19] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[20] -1 0 0x00001060 - 0x0000107f (0x20) IX[B]E
[21] -1 0 0x00001050 - 0x0000105f (0x10) IX[B]E
[22] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
[23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) R128(0): Write-combining range (0xf4100000,0x4000) was already clear
(==) R128(0): Write-combining range (0xf8000000,0x800000)
(==) R128(0): Write-combining range (0xa0000,0x10000) was already clear
(II) R128(0): Memory manager initialized to (0,0) (1024,4096)
(II) R128(0): Reserved area from (0,768) to (1024,770)
(II) R128(0): Largest offscreen area available: 1024 x 3326
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
6 512x512 slots
(II) R128(0): Acceleration enabled
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using hardware cursor (scanline 1540)
(II) R128(0): Largest offscreen area available: 1024 x 3324
(==) R128(0): DPMS disabled
(II) R128(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/sysmouse"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/sysmouse"
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse1: Buttons: 3
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: SetupAuto: hw.iftype is 4, hw.model is 0
(II) Mouse1: SetupAuto: protocol is SysMouse
(==) R128(0): Write-combining range (0xa0000,0x10000) was already clear

--
As nice it is to receive personal mail, too much sweetness causes
tooth decay. Unless you have burning desire to contact me, do not do
away w/ WhereElse in the address for private communication.