XFree86 4.3.0, S3 Savage IX On IBM Thinkpad T20 - X

This is a discussion on XFree86 4.3.0, S3 Savage IX On IBM Thinkpad T20 - X ; Hello all, I am trying to get XFree86 4.3.0 working using the driver at http://www.probo.com/timr/savage40.html . The computer is an IBM thinkpad T20, and has a S3 Savage/IX graphics card. When I try to start X, I get these errors: ...

+ Reply to Thread
Results 1 to 3 of 3

Thread: XFree86 4.3.0, S3 Savage IX On IBM Thinkpad T20

  1. XFree86 4.3.0, S3 Savage IX On IBM Thinkpad T20

    Hello all,
    I am trying to get XFree86 4.3.0 working using the driver at
    http://www.probo.com/timr/savage40.html .

    The computer is an IBM thinkpad T20, and has a S3 Savage/IX graphics card.
    When I try to start X, I get these errors:

    (EE) VGA(0): Virtual height (0) is too small for the hardware (min 1)
    (EE) Screen(s) found, but none have a usable configuration.

    X starts properly using the VESA driver.

    My full XF86Config and XFree86.0.log files are below:
    Any ideas? Thanks in advance.

    Regards,
    Richard



    XFree86.0.log:
    XFree86 Version 4.3.0
    Release Date: 27 February 2003
    X Protocol Version 11, Revision 0, Release 6.6
    Build Operating System: Linux 2.4.22 i686 [ELF]
    Build Date: 16 September 2003
    Before reporting problems, check http://www.XFree86.Org/
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/XFree86.0.log", Time: Sun Jan 23 09:16:33 2005
    (==) Using config file: "/etc/X11/XF86Config"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) | |-->Monitor "My Monitor"
    (**) | |-->Device "My Video Card"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (==) Keyboard: CustomKeycode disabled
    (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fon
    (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
    (==) ModulePath set to "/usr/X11R6/lib/modules"
    (--) using VT number 7

    (WW) Open APM failed (/dev/apm_bios) (No such device)
    (II) Module ABI versions:
    XFree86 ANSI C Emulation: 0.2
    XFree86 Video Driver: 0.6
    XFree86 XInput driver : 0.4
    XFree86 Server Extension : 0.2
    XFree86 Font Renderer : 0.4
    (II) Loader running on linux
    (II) LoadModule: "bitmap"
    (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
    (II) Module bitmap: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Bitmap
    (II) LoadModule: "pcidata"
    (II) Loading /usr/X11R6/lib/modules/libpcidata.a
    (II) Module pcidata: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.6
    (II) PCI: Probing config type using method 1
    (II) PCI: Config type is 1
    (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
    (II) PCI: 00:02:0: chip 104c,ac1b card 4000,0000 rev 03 class 06,07,00 hdr 82
    (II) PCI: 00:02:1: chip 104c,ac1b card 4800,0000 rev 03 class 06,07,00 hdr 82
    (II) PCI: 00:03:0: chip 10b7,6056 card 10b7,6356 rev 20 class 02,00,00 hdr 80
    (II) PCI: 00:03:1: chip 10b7,1007 card 10b7,6159 rev 20 class 07,80,00 hdr 00
    (II) PCI: 00:05:0: chip 1013,6003 card 1014,0153 rev 01 class 04,01,00 hdr 00
    (II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,80,00 hdr 80
    (II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
    (II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
    (II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 03 class 06,80,00 hdr 00
    (II) PCI: 01:00:0: chip 5333,8c12 card 1014,017f rev 11 class 03,00,00 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x008c (VGA_EN is set)
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
    (II) PCI-to-CardBus bridge:
    (II) Bus 2: bridge is at (0:2:0), (0,2,4), BCTRL: 0x05c0 (VGA_EN is cleared)
    (II) Bus 2 I/O range:
    [0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
    [1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
    (II) Bus 2 non-prefetchable memory range:
    [0] -1 0 0x10400000 - 0x107fffff (0x400000) MX[B]
    (II) Bus 2 prefetchable memory range:
    [0] -1 0 0x10000000 - 0x103fffff (0x400000) MX[B]
    (II) PCI-to-CardBus bridge:
    (II) Bus 5: bridge is at (0:2:1), (0,5,7), BCTRL: 0x05c0 (VGA_EN is cleared)
    (II) Bus 5 I/O range:
    [0] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
    [1] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
    (II) Bus 5 non-prefetchable memory range:
    [0] -1 0 0x10c00000 - 0x10ffffff (0x400000) MX[B]
    (II) Bus 5 prefetchable memory range:
    [0] -1 0 0x10800000 - 0x10bfffff (0x400000) MX[B]
    (--) PCI:*(1:0:0) S3 Inc. 86C270-294 Savage/IX-MV rev 17, Mem @ 0xf0000000/27
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) OS-reported resource ranges:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    (II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to 0xf7fff
    fff
    (II) Active PCI resource ranges:
    [0] -1 0 0xe8000000 - 0xe80fffff (0x100000) MX[B]
    [1] -1 0 0xe8100000 - 0xe8100fff (0x1000) MX[B]
    [2] -1 0 0xe8101800 - 0xe810187f (0x80) MX[B]
    [3] -1 0 0xe8101c00 - 0xe8101cff (0x100) MX[B]
    [4] -1 0 0xe8101000 - 0xe810107f (0x80) MX[B]
    [5] -1 0 0xe8101400 - 0xe810147f (0x80) MX[B]
    [6] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
    [7] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
    [8] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
    [9] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B]
    [10] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
    [11] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xe8000000 - 0xe80fffff (0x100000) MX[B]
    [1] -1 0 0xe8100000 - 0xe8100fff (0x1000) MX[B]
    [2] -1 0 0xe8101800 - 0xe810187f (0x80) MX[B]
    [3] -1 0 0xe8101c00 - 0xe8101cff (0x100) MX[B]
    [4] -1 0 0xe8101000 - 0xe810107f (0x80) MX[B]
    [5] -1 0 0xe8101400 - 0xe810147f (0x80) MX[B]
    [6] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
    [7] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
    [8] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
    [9] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B]
    [10] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
    [11] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0xe8000000 - 0xe80fffff (0x100000) MX[B]
    [6] -1 0 0xe8100000 - 0xe8100fff (0x1000) MX[B]
    [7] -1 0 0xe8101800 - 0xe810187f (0x80) MX[B]
    [8] -1 0 0xe8101c00 - 0xe8101cff (0x100) MX[B]
    [9] -1 0 0xe8101000 - 0xe810107f (0x80) MX[B]
    [10] -1 0 0xe8101400 - 0xe810147f (0x80) MX[B]
    [11] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
    [12] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
    [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [15] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
    [16] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B]
    [17] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
    [18] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
    (II) LoadModule: "dbe"
    (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
    (II) Module dbe: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
    (II) Module extmod: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension FontCache
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "type1"
    (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
    (II) Module type1: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.2
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Type1
    (II) Loading font CID
    (II) LoadModule: "freetype"
    (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
    (II) Module freetype: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 2.0.2
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font FreeType
    (II) LoadModule: "speedo"
    (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
    (II) Module speedo: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.1
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Speedo
    (II) LoadModule: "glx"
    (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
    (II) Module glx: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading sub module "GLcore"
    (II) LoadModule: "GLcore"
    (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
    (II) Module GLcore: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension GLX
    (II) LoadModule: "vga"
    (II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.o
    (II) Module vga: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 4.0.0
    Module class: XFree86 Video Driver
    ABI class: XFree86 Video Driver, version 0.6
    (II) LoadModule: "mouse"
    (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
    (II) Module mouse: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    Module class: XFree86 XInput Driver
    ABI class: XFree86 XInput driver, version 0.4
    (II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
    (II) Primary Device is: PCI 01:00:0
    (--) Assigning device section with no busID to primary device
    (--) Chipset generic found
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0xe8000000 - 0xe80fffff (0x100000) MX[B]
    [6] -1 0 0xe8100000 - 0xe8100fff (0x1000) MX[B]
    [7] -1 0 0xe8101800 - 0xe810187f (0x80) MX[B]
    [8] -1 0 0xe8101c00 - 0xe8101cff (0x100) MX[B]
    [9] -1 0 0xe8101000 - 0xe810107f (0x80) MX[B]
    [10] -1 0 0xe8101400 - 0xe810147f (0x80) MX[B]
    [11] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
    [12] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
    [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [15] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
    [16] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B]
    [17] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
    [18] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
    (II) resource ranges after probing:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0xe8000000 - 0xe80fffff (0x100000) MX[B]
    [6] -1 0 0xe8100000 - 0xe8100fff (0x1000) MX[B]
    [7] -1 0 0xe8101800 - 0xe810187f (0x80) MX[B]
    [8] -1 0 0xe8101c00 - 0xe8101cff (0x100) MX[B]
    [9] -1 0 0xe8101000 - 0xe810107f (0x80) MX[B]
    [10] -1 0 0xe8101400 - 0xe810147f (0x80) MX[B]
    [11] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
    [12] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
    [13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
    [14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
    [15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [18] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
    [19] -1 0 0x00001c00 - 0x00001c0f (0x10) IX[B]
    [20] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
    [21] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
    [22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
    [23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Setting vga for screen 0.
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
    (II) Module int10: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.6
    (II) VGA(0): initializing int10.
    (II) VGA(0): Primary V_BIOS segment is: 0xc000
    (**) VGA(0): Depth 16, (--) framebuffer bpp 16
    (==) VGA(0): RGB weight 565
    (==) VGA(0): Default visual is TrueColor
    (==) VGA(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) VGA(0): videoRam: 256 kBytes.
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/X11R6/lib/modules/libvgahw.a
    (II) Module vgahw: vendor="The XFree86 Project"
    compiled for 4.3.0, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.6
    (II) VGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (--) VGA(0): Pixel clocks available:
    (--) VGA(0): pixel clocks: 28.320 28.322 28.320 28.320
    (II) VGA(0): My Monitor: Using hsync range of 31.50-48.50 kHz
    (II) VGA(0): My Monitor: Using vrefresh range of 50.00-90.00 Hz
    (II) VGA(0): Not using default mode "640x350" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "640x400" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "720x400" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "360x200" (hsync out of range)
    (II) VGA(0): Not using default mode "640x480" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "640x480" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "640x480" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "640x480" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "400x300" (hsync out of range)
    (II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "400x300" (hsync out of range)
    (II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "400x300" (hsync out of range)
    (II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "400x300" (hsync out of range)
    (II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "400x300" (hsync out of range)
    (II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "512x384" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "512x384" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "512x384" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "512x384" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "512x384" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1152x864" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "576x432" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1280x960" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "640x480" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1280x960" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "640x480" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1280x1024" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "640x512" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1280x1024" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "640x512" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1280x1024" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "640x512" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "800x600" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "896x672" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "896x672" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "928x696" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "928x696" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "960x720" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "960x720" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "832x624" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "416x312" (hsync out of range)
    (II) VGA(0): Not using default mode "1152x768" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "576x384" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1400x1050" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "700x525" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1400x1050" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "700x525" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1600x1024" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "800x512" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "960x720" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
    (II) VGA(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) VGA(0): Not using mode "1024x768" (no mode of this name)
    (II) VGA(0): Not using mode "800x600" (no mode of this name)
    (II) VGA(0): Not using mode "640x480" (no mode of this name)
    (II) VGA(0): Not using mode "320x240" (no clock available for mode)
    (II) VGA(0): Not using mode "320x200" (no clock available for mode)
    (II) VGA(0): Not using mode "320x175" (no clock available for mode)
    (EE) VGA(0): Virtual height (0) is too small for the hardware (min 1)
    (II) UnloadModule: "vga"
    (II) UnloadModule: "vgahw"
    (II) Unloading /usr/X11R6/lib/modules/libvgahw.a
    (II) UnloadModule: "int10"
    (II) Unloading /usr/X11R6/lib/modules/linux/libint10.a
    (EE) Screen(s) found, but none have a usable configuration.

    Fatal server error:
    no screens found

    When reporting a problem related to a server crash, please send
    the full server output, not just the last messages.
    This can be found in the log file "/var/log/XFree86.0.log".
    Please report problems to xfree86@xfree86.org.





    XF86Config:
    # File generated by xf86config.

    #
    # Copyright (c) 1999 by The XFree86 Project, Inc.
    #
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    #
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    #
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    #
    # Except as contained in this notice, the name of the XFree86 Project shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from the
    # XFree86 Project.
    #

    # ************************************************** ********************
    # Refer to the XF86Config(4/5) man page for details about the format of
    # this file.
    # ************************************************** ********************

    # NOTE: This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
    # driver instead of the fbdev driver. Thanks to Kenneth Fanyo who pointed
    # this out to me.

    # This XF86Config file is designed for use with the VESA framebuffer.
    # This generic interface should work with nearly all video cards
    # (although not every card will support every resolution).

    # With the new driver, it should no longer be required to have frame buffer
    # support in the kernel, or to run it on the console.
    #
    # Enjoy!
    # -- volkerdi@slackware.com
    #

    # ************************************************** ********************
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    # ************************************************** ********************
    #
    Section "Module"

    # This loads the DBE extension module.

    Load "dbe" # Double buffer extension

    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection

    # This loads the font modules
    Load "type1"
    Load "freetype"
    Load "speedo"

    # This loads the GLX module
    Load "glx"

    EndSection

    # ************************************************** ********************
    # Files section. This allows default font and rgb paths to be set
    # ************************************************** ********************

    Section "Files"

    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.

    RgbPath "/usr/X11R6/lib/X11/rgb"

    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    #
    # If you don't have a floating point coprocessor and emacs, Mosaic or other
    # programs take long to start up, try moving the Type1 and Speedo directory
    # to the end of this list (or comment them out).
    #

    FontPath "/usr/X11R6/lib/X11/fonts/local/"
    FontPath "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath "/usr/X11R6/lib/X11/fonts/CID/"
    FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"

    # ModulePath can be used to set a search path for the X server modules.
    # The default path is shown here.

    # ModulePath "/usr/X11R6/lib/modules"

    EndSection

    # ************************************************** ********************
    # Server flags section.
    # ************************************************** ********************

    Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging

    # Option "NoTrapSignals"

    # Uncomment this to disable the VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.

    # Option "DontVTSwitch"

    # Uncomment this to disable the server abort sequence
    # This allows clients to receive this key event.

    # Option "DontZap"

    # Uncomment this to disable the / mode switching
    # sequences. This allows clients to receive these key events.

    # Option "DontZoom"

    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.

    # Option "DisableVidModeExtension"

    # Uncomment this to enable the use of a non-local xvidtune client.

    # Option "AllowNonLocalXvidtune"

    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.

    # Option "DisableModInDev"

    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).

    # Option "AllowNonLocalModInDev"

    # Set the basic blanking screen saver timeout.

    # Option "blank time" "10" # 10 minutes

    # Set the DPMS timeouts. These are set here because they are global
    # rather than screen-specific. These settings alone don't enable DPMS.
    # It is enabled per-screen (or per-monitor), and even then only when
    # the driver supports it.

    # Option "standby time" "20"
    # Option "suspend time" "30"
    # Option "off time" "60"

    # On some platform the server needs to estimate the sizes of PCI
    # memory and pio ranges. This is done by assuming that PCI ranges
    # don't overlap. Some broken BIOSes tend to set ranges of inactive
    # devices wrong. Here one can adjust how aggressive the assumptions
    # should be. Default is 0.

    # Option "EstimateSizesAggresively" "0"

    EndSection

    # ************************************************** ********************
    # Input devices
    # ************************************************** ********************

    # ************************************************** ********************
    # Core keyboard's InputDevice section
    # ************************************************** ********************

    Section "InputDevice"

    Identifier "Keyboard1"
    Driver "Keyboard"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.

    # Option "Protocol" "Xqueue"

    # Set the keyboard auto repeat parameters. Not all platforms implement
    # this.

    # Option "AutoRepeat" "500 5"

    # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).

    # Option "Xleds" "1 2 3"

    # To disable the XKEYBOARD extension, uncomment XkbDisable.

    # Option "XkbDisable"

    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a European
    # keyboard, you will probably want to use one of:
    #
    # Option "XkbModel" "pc102"
    # Option "XkbModel" "pc105"
    #
    # If you have a Microsoft Natural keyboard, you can use:
    #
    # Option "XkbModel" "microsoft"
    #
    # If you have a US "windows" keyboard you will want:
    #
    # Option "XkbModel" "pc104"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    #
    # Option "XkbLayout" "de"
    #
    # or:
    #
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    #
    # Option "XkbOptions" "ctrl:swapcaps"


    # These are the default XKB settings for XFree86
    #
    # Option "XkbRules" "xfree86"
    # Option "XkbModel" "pc101"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""

    EndSection


    # ************************************************** ********************
    # Core Pointer's InputDevice section
    # ************************************************** ********************

    Section "InputDevice"

    # Identifier and driver

    Identifier "Mouse1"
    Driver "mouse"

    # On platforms where PnP mouse detection is supported the following
    # protocol setting can be used when using a newer PnP mouse:

    # Option "Protocol" "Auto"

    # The available mouse protocols types that you can set below are:
    # Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
    # Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
    # MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
    # ThinkingMouse ThinkingMousePS/2 Xqueue
    Option "Protocol" "PS/2"

    # The mouse device. The device is normally set to /dev/mouse,
    # which is usually a symbolic link to the real device.

    Option "Device" "/dev/mouse"
    # Option "Device" "/dev/psaux"
    # Option "Device" "/dev/ttyS0"
    # Option "Device" "/dev/ttyS1"

    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.

    # Option "Protocol" "Xqueue"

    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.

    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"

    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"

    # ChordMiddle is an option for some 3-button Logitech mice

    # Option "ChordMiddle"

    EndSection

    # Some examples of extended input devices

    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection

    # ************************************************** ********************
    # Monitor section
    # ************************************************** ********************

    # Any number of monitor sections may be present

    Section "Monitor"

    Identifier "My Monitor"

    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync 31.5 - 48.5

    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-90

    EndSection


    # ************************************************** ********************
    # Graphics device section
    # ************************************************** ********************

    # Any number of graphics device sections may be present

    # Standard VGA Device:

    Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"

    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.

    # Chipset "generic"

    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.

    Driver "savage"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.

    # BusID "PCI:0:10:0"

    VideoRam 8192

    # Clocks 25.2 28.3

    EndSection

    # Device configured by xf86config:

    Section "Device"
    Identifier "My Video Card"
    Driver "vga"
    # unsupported card
    #VideoRam 8192
    # Insert Clocks lines here if appropriate
    EndSection


    # ************************************************** ********************
    # Screen sections
    # ************************************************** ********************

    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "My Video Card"
    Monitor "My Monitor"
    DefaultDepth 16

    Subsection "Display"
    Depth 8
    Modes "1024x768" "800x600" "640x480"
    # ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    # ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    # ViewPort 0 0
    EndSubsection
    EndSection
    # ************************************************** ********************
    # ServerLayout sections.
    # ************************************************** ********************

    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.

    Section "ServerLayout"

    # The Identifier line must be present
    Identifier "Simple Layout"

    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.

    Screen "Screen 1"

    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

    EndSection




  2. Re: XFree86 4.3.0, S3 Savage IX On IBM Thinkpad T20

    Richard Stephens wrote:
    >
    >Hello all,
    >I am trying to get XFree86 4.3.0 working using the driver at
    >http://www.probo.com/timr/savage40.html .
    >
    >The computer is an IBM thinkpad T20, and has a S3 Savage/IX graphics card.
    > When I try to start X, I get these errors:
    >
    >(EE) VGA(0): Virtual height (0) is too small for the hardware (min 1)
    >(EE) Screen(s) found, but none have a usable configuration.
    >
    >X starts properly using the VESA driver.
    >
    >My full XF86Config and XFree86.0.log files are below:
    >Any ideas?


    Even the short snippet you posted above shows the problem. See where it
    says "VGA(0)"? That says you're using the stock VGA driver, not the Savage
    driver.

    Here are excerpts from your XF86Config showing the issue:

    ># ************************************************** ********************
    ># Graphics device section
    ># ************************************************** ********************
    >
    ># Any number of graphics device sections may be present
    >
    ># Standard VGA Device:
    >
    >Section "Device"
    > Identifier "Standard VGA"
    > VendorName "Unknown"
    > BoardName "Unknown"
    > Driver "savage"
    > VideoRam 8192
    >EndSection
    >
    ># Device configured by xf86config:
    >
    >Section "Device"
    > Identifier "My Video Card"
    > Driver "vga"
    > # unsupported card
    > #VideoRam 8192
    > # Insert Clocks lines here if appropriate
    >EndSection


    Notice how the section labelled "Standard VGA" defined the Savage driver,
    but the "My Video Card" section defines the VGA driver. You almost
    certainly want the opposite.

    ># ************************************************** ********************
    ># Screen sections
    ># ************************************************** ********************
    >
    ># Any number of screen sections may be present. Each describes
    ># the configuration of a single screen. A single specific screen section
    ># may be specified from the X server command line with the "-screen"
    ># option.
    >Section "Screen"
    > Identifier "Screen 1"
    > Device "My Video Card"
    > Monitor "My Monitor"
    > DefaultDepth 16


    See? The screen is defined to use "My Video Card", which is the stock VGA
    driver.
    --
    - Tim Roberts, timr@probo.com
    Providenza & Boekelheide, Inc.

  3. Re: XFree86 4.3.0, S3 Savage IX On IBM Thinkpad T20

    Ya know, I feel like kicking myself. The solution was so simple yet I
    failed to see it. Thanks for your help.

    Regards,
    Richard

    On Sat, 22 Jan 2005 21:23:52
    -0800, Tim Roberts wrote:

    > Richard Stephens wrote:
    >>
    >>Hello all,
    >>I am trying to get XFree86 4.3.0 working using the driver at
    >>http://www.probo.com/timr/savage40.html .
    >>
    >>The computer is an IBM thinkpad T20, and has a S3 Savage/IX graphics card.
    >> When I try to start X, I get these errors:
    >>
    >>(EE) VGA(0): Virtual height (0) is too small for the hardware (min 1)
    >>(EE) Screen(s) found, but none have a usable configuration.
    >>
    >>X starts properly using the VESA driver.
    >>
    >>My full XF86Config and XFree86.0.log files are below:
    >>Any ideas?

    >
    > Even the short snippet you posted above shows the problem. See where it
    > says "VGA(0)"? That says you're using the stock VGA driver, not the Savage
    > driver.
    >
    > Here are excerpts from your XF86Config showing the issue:
    >
    >># ************************************************** ********************
    >># Graphics device section
    >># ************************************************** ********************
    >>
    >># Any number of graphics device sections may be present
    >>
    >># Standard VGA Device:
    >>
    >>Section "Device"
    >> Identifier "Standard VGA"
    >> VendorName "Unknown"
    >> BoardName "Unknown"
    >> Driver "savage"
    >> VideoRam 8192
    >>EndSection
    >>
    >># Device configured by xf86config:
    >>
    >>Section "Device"
    >> Identifier "My Video Card"
    >> Driver "vga"
    >> # unsupported card
    >> #VideoRam 8192
    >> # Insert Clocks lines here if appropriate
    >>EndSection

    >
    > Notice how the section labelled "Standard VGA" defined the Savage driver,
    > but the "My Video Card" section defines the VGA driver. You almost
    > certainly want the opposite.
    >
    >># ************************************************** ********************
    >># Screen sections
    >># ************************************************** ********************
    >>
    >># Any number of screen sections may be present. Each describes
    >># the configuration of a single screen. A single specific screen section
    >># may be specified from the X server command line with the "-screen"
    >># option.
    >>Section "Screen"
    >> Identifier "Screen 1"
    >> Device "My Video Card"
    >> Monitor "My Monitor"
    >> DefaultDepth 16

    >
    > See? The screen is defined to use "My Video Card", which is the stock VGA
    > driver.



+ Reply to Thread