hi all,

we need USB Host CETK testing Procedure document.In one mail to the
newsgroup,it was said that it would be available on the next PB 5.0
Help Update.

I have seen that update is available from the following link:
http://www.microsoft.com/downloads/d...displaylang=en

I have downloaded the updates but i couldnt able to find the
procedures for usb host CETK testing. please help me in this regard by
giving the testing procedure documents or suggesting me the place to
find the help updates containing the document.


Problem faced in USB Host CETK Testing

1) We have setup the testing environment using NET2280 chip connected
to CEPC as USB device.
2) CEPC image has been download to PC.
3) net2280.dll is loaded fine.
4) we typed " s lufldrv -n " in the target control window for loading
the net2280lpbk.dll.


The log we got is as follows:

333864 PID:a3c2fb3a TID:a3c0b862 0x83c03d8c: >>> Loading module
lufldrv.exe at address 0x10010000-0x10014000
Loaded symbols for
'C:\WINCE500\PBWORKSPACES\CEPC\RELDIR\CEPC_X86_DEB UG\LUFLDRV.EXE'
334017 PID:a3c2fb3a TID:a3c0b862 0x83c03d8c: InitSharedHeap: 46000000
0 c
334017 PID:a3c2fb3a TID:a3c0b862 0x83c03d8c: InitSharedHeap: return
46000060
334047 PID:a3c2fb3a TID:a3c0b862 0x83c03d8c: NetChip2280 dataloopback
driver will be loaded!
334794 PID:43f989d2 TID:a3c0b862 0x83c03d8c:
UsbFnMdd!CUfnBus::CreateChild: Using client driver key
"\Drivers\USB\FunctionDrivers\USBTest"
334815 PID:43f989d2 TID:a3c0b862 0x83c03d8c: UsbFnMdd!CPipe::Close:
Closed pipe (0x0039bec8): physical address 1, bus address 0x81
334815 PID:43f989d2 TID:a3c0b862 0x83c03d8c: UsbFnMdd!CPipe::Close:
Closed pipe (0x0039bf40): physical address 2, bus address 0x02
334843 PID:43f989d2 TID:43cecb5e 0x83cec9b0: UsbFnMdd!UfnMdd_Notify:
Ignoring notification 0x00000001 - 0x00000000 from PDD
334844 PID:43f989d2 TID:a3c0b862 0x83c03d8c: UsbFnMdd!CPipe::Close:
Closed pipe (0x0039be50): physical address 0, bus address 0x00
334844 PID:43f989d2 TID:a3c0b862 0x83c03d8c: UsbMsFn!DllEntry:
Detached
334844 PID:43f989d2 TID:a3c0b862 0x83c03d8c: <<< Unloading module
usbmsfn.dll at address 0x03620000-0x0362B000 (RW data at
0x01F44000-0x01F44D41)
Unloaded symbols for
'C:\WINCE500\PBWORKSPACES\CEPC\RELDIR\CEPC_X86_DEB UG\USBMSFN.DLL'
334995 PID:43f989d2 TID:a3c0b862 0x83c03d8c:
UsbFnMdd!CUfnBus::CleanUpAfterClient: Deactivated client driver
"Mass_Storage_Class"
335028 PID:83fc8c1a TID:83fa7212 0x83fc8800: CStore
Destructor(00098170)
335030 PID:83fc8c1a TID:83fa7212 0x83fc8800: >>> Loading module
mspart.dll at address 0x03CF0000-0x03CF9000 (RW data at
0x01FD7000-0x01FD74B4)
Loaded symbols for
'C:\WINCE500\PBWORKSPACES\CEPC\RELDIR\CEPC_X86_DEB UG\MSPART.DLL'
336756 PID:43f989d2 TID:a3c0b862 0x83c03d8c:
DEVICE!RegReadActivationValues
RegQueryValueEx(\Drivers\USB\FunctionDrivers\USBTe st\BusPrefix)
returned 2

After this debugger is still running, no debug messages are coming...it
seems that
we are missing some configurations.

Any suggestions will be really appreciated.


waiting for reply.
raj