MQ problem - Websphere

This is a discussion on MQ problem - Websphere ; Below are two queue manager with the respective definition. QMGRA: DEFINE QLOCAL(QMGRB.XMIT.DF) DESCR('Transmission') TRIGGER + USAGE(XMITQ) PUT(ENABLED) GET(ENABLED) + TRIGTYPE(EVERY) TRIGDATA(QMGRA.QMGRB.DF) INITQ(SYSTEM.CHANNEL.INITQ) DEFINE CHANNEL(QMGRA.QMGRB.DF) CHLTYPE(SDR) TRPTYPE(TCP) CONNAME('localhost(1414)') + XMITQ(QMGRB.XMIT.DF) DESCR('Sender') DEFINE CHANNEL(QMGRB.QMGRA.DF) CHLTYPE(RCVR) TRPTYPE(TCP) DESCR('Receiver') DEFINE QREMOTE(QMGRA.QMGRB.RQST) DESCR('Remote') RQMNAME(QMGRB) PUT(ENABLED) ...

+ Reply to Thread
Results 1 to 2 of 2

Thread: MQ problem

  1. MQ problem

    Below are two queue manager with the respective definition.

    QMGRA:

    DEFINE QLOCAL(QMGRB.XMIT.DF) DESCR('Transmission') TRIGGER +
    USAGE(XMITQ) PUT(ENABLED) GET(ENABLED) +
    TRIGTYPE(EVERY) TRIGDATA(QMGRA.QMGRB.DF) INITQ(SYSTEM.CHANNEL.INITQ)

    DEFINE CHANNEL(QMGRA.QMGRB.DF) CHLTYPE(SDR) TRPTYPE(TCP)
    CONNAME('localhost(1414)') +
    XMITQ(QMGRB.XMIT.DF) DESCR('Sender')

    DEFINE CHANNEL(QMGRB.QMGRA.DF) CHLTYPE(RCVR) TRPTYPE(TCP)
    DESCR('Receiver')

    DEFINE QREMOTE(QMGRA.QMGRB.RQST) DESCR('Remote') RQMNAME(QMGRB)
    PUT(ENABLED) +
    XMITQ(QMGRB.XMIT.DF) RNAME(QMGRA.QMGRB.RQSTIN)

    DEFINE QLOCAL(QMGRB.OMGRA.RQSTIN) PUT(ENABLED) GET(ENABLED)

    QMGRB:

    DEFINE QLOCAL(QMGRA.XMIT.DF) DESCR('Transmission') TRIGGER +
    USAGE(XMITQ) PUT(ENABLED) GET(ENABLED) +
    TRIGTYPE(EVERY) TRIGDATA(QMGRB.QMGRA.DF) INITQ(SYSTEM.CHANNEL.INITQ)

    DEFINE CHANNEL(QMGRB.QMGRA.DF) CHLTYPE(SDR) TRPTYPE(TCP)
    CONNAME('localhost(1415)') +
    XMITQ(QMGRA.XMIT.DF) DESCR('SENDER')

    DEFINE CHANNEL(QMGRA.QMGRB.DF) CHLTYPE(RCVR) TRPTYPE(TCP)
    DESCR('RECEIVER')

    DEFINE QREMOTE(QMGRB.QMGRA.RQST) DESCR('Remote') RQMNAME(QMGRA)
    PUT(ENABLED) +
    XMITQ(QMGRA.XMIT.DF) RNAME(QMGRB.QMGRA.RQSTIN)

    DEFINE QLOCAL(QMGRA.QMGRB.RQSTIN) PUT(ENABLED) GET(ENABLED)

    Also I added messages as in:

    amqsput QMGRA.QMGRB.RQST QMGRA
    amqsput QMGRB.QMGRA.RQST QMGRB

    After adding the messages the messages remains in the sender
    transmission queue and never gets put into the receiver local queue.
    How do I solve the problem?.

  2. Re: MQ problem

    On 22 jun, 04:45, solomon_13...@yahoo.com wrote:
    > Below are two queue manager with the respective definition.
    >
    > QMGRA:
    >
    > DEFINE QLOCAL(QMGRB.XMIT.DF) DESCR('Transmission') TRIGGER +
    > USAGE(XMITQ) PUT(ENABLED) GET(ENABLED) +
    > TRIGTYPE(EVERY) TRIGDATA(QMGRA.QMGRB.DF) INITQ(SYSTEM.CHANNEL.INITQ)
    >
    > DEFINE CHANNEL(QMGRA.QMGRB.DF) CHLTYPE(SDR) TRPTYPE(TCP)
    > CONNAME('localhost(1414)') +
    > XMITQ(QMGRB.XMIT.DF) DESCR('Sender')
    >
    > DEFINE CHANNEL(QMGRB.QMGRA.DF) CHLTYPE(RCVR) TRPTYPE(TCP)
    > DESCR('Receiver')
    >
    > DEFINE QREMOTE(QMGRA.QMGRB.RQST) DESCR('Remote') RQMNAME(QMGRB)
    > PUT(ENABLED) +
    > XMITQ(QMGRB.XMIT.DF) RNAME(QMGRA.QMGRB.RQSTIN)
    >
    > DEFINE QLOCAL(QMGRB.OMGRA.RQSTIN) PUT(ENABLED) GET(ENABLED)
    >
    > QMGRB:
    >
    > DEFINE QLOCAL(QMGRA.XMIT.DF) DESCR('Transmission') TRIGGER +
    > USAGE(XMITQ) PUT(ENABLED) GET(ENABLED) +
    > TRIGTYPE(EVERY) TRIGDATA(QMGRB.QMGRA.DF) INITQ(SYSTEM.CHANNEL.INITQ)
    >
    > DEFINE CHANNEL(QMGRB.QMGRA.DF) CHLTYPE(SDR) TRPTYPE(TCP)
    > CONNAME('localhost(1415)') +
    > XMITQ(QMGRA.XMIT.DF) DESCR('SENDER')
    >
    > DEFINE CHANNEL(QMGRA.QMGRB.DF) CHLTYPE(RCVR) TRPTYPE(TCP)
    > DESCR('RECEIVER')
    >
    > DEFINE QREMOTE(QMGRB.QMGRA.RQST) DESCR('Remote') RQMNAME(QMGRA)
    > PUT(ENABLED) +
    > XMITQ(QMGRA.XMIT.DF) RNAME(QMGRB.QMGRA.RQSTIN)
    >
    > DEFINE QLOCAL(QMGRA.QMGRB.RQSTIN) PUT(ENABLED) GET(ENABLED)
    >
    > Also I added messages as in:
    >
    > amqsput QMGRA.QMGRB.RQST QMGRA
    > amqsput QMGRB.QMGRA.RQST QMGRB
    >
    > After adding the messages the messages remains in the sender
    > transmission queue and never gets put into the receiver local queue.
    > How do I solve the problem?.


    Check the sender channel status. Start it if its stopped, and verify
    the connection to remote queue managers, ensure that mq listeners are
    up and listening on the correct port numbers.

+ Reply to Thread