Hi All

I builded and programmed the bootrom image into flash. after downloading i got the vxWorks prompt [VxWorks Boot] onto console after stopping the auto boot. Now i typed p to check bootline parametres..as shown below

boot device : lltemac
unit number : 0
processor number : 0
host name : host
file name : vxWorks
inet on ethernet (e) : 192.168.0.2
host inet (h) : 192.168.0.1
user (u) : software
ftp password (pw) : pass
flags (f) : 0x0


Now i opened the wftpd provided by windriver to download the vxWorks image. I created a new user name called software and set the password to pass and set the path of image file in home directory of software user name. i kept the wftpd window open.

then i typed @ at console terminal to download image from wftpd...

Here i got a problem..

(1) When i tried to download image continousely 5-10 times it does't download the image continousely . out of 5 to 10 times it downloads only 1 0r 2 times.

So I am not able to understand What is the root cause of this problem.


I am attaching the log also........



VxWorks Boot]: @

boot device : lltemac
unit number : 0
processor number : 0
host name : host
file name : vxWorks
inet on ethernet (e) : 192.168.0.2
host inet (h) : 192.168.0.1
user (u) : software
ftp password (pw) : pass
flags (f) : 0x0

Attaching interface lo0... done
lltemac: warning - MII clock is defaulted to 1000 Mbps
lltemac: Buffer information:
0x00018818 bytes allocated for all buffers
1564 byte cluster size
64 Rx buffers, 1st buffer located at 0x0160ABC0
Attached IPv4 interface to lltemac unit 0
Loading... 1317184
Starting at 0x100000...

Attaching interface lo0... done
lltemac: warning - MII clock is defaulted to 1000 Mbps
lltemac: Buffer information:
0x00018808 bytes allocated for all buffers
1564 byte cluster size
64 Rx buffers, 1st buffer located at 0x007BC020
Attached IPv4 interface to lltemac unit 0

Adding 4630 symbols for standalone.


]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks 6.3
]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.9
]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2006

CPU: Xilinx Virtex5 PPC440x5. Processor #0.
Memory Size: 0x4000000. BSP version 2.0/0.
Created: Nov 22 2010, 17:18:01
ED&R Policy Mode: Deployed
WDB Comm Type: WDB_COMM_END
WDB: Ready.

->


Press any key to stop auto-boot...
7

[VxWorks Boot]

boot device : 0
unit number : 0
processor number : 0




after setting the boot parametres again




[VxWorks Boot]: c
boot device : lltemac
unit number : 0
processor number : 0
host name : host
file name : vxWorks
inet on ethernet (e) : 192.168.0.2
host inet (h) : 192.168.0.1
user (u) : software
ftp password (pw) : pass
flags (f) : 0x0

[VxWorks Boot]: @

Attaching interface lo0... done
lltemac: warning - MII clock is defaulted to 1000 Mbps
lltemac: Buffer information:
0x00018818 bytes allocated for all buffers
1564 byte cluster size
64 Rx buffers, 1st buffer located at 0x0160ABC0
Attached IPv4 interface to lltemac unit 0
Loading...
Error loading file: errno = 0x3c.


(2) When i hit ctrl+x onto console terminal all bootline parametres saved to 0. can any one tell me why this is happening and how to save the old bootline parametres after hitting ctrl+x

(3)

Please Help me if anyone already faced the same problem

Thanks and Best Regards
Mark