Sorry for the rather basic question. I have already looked into several of the FAQs, and have been unable to determine the commands to run disk check.

I'm a network engineer - not a programmer, so please excuse me if I use the incorrect terminology.

So here goes:

I'm running VXWorks 5.3.1 upon boot VXworks does an automatic disc check.

Is it possible to run this check again - without reloading the device?

/scsi// - disk check in progress ...
/scsi// - Volume is OK

total # of clusters: 62,463
# of free clusters: 25,968
# of bad clusters: 0
total free space: 51,936 Kb
max contiguous free space: 9,906,176 bytes
# of files: 275
# of folders: 14
total bytes in files: 72,646 Kb
# of lost chains: 0
total bytes in lost chains: 0


Thank you for looking into this for me.


Bunch of info below:

-> version
VxWorks (for Smart Y300 ) version 5.3.1.
Kernel: WIND version 2.5.
Made on Jul 31 2002, 10:48:01.
Boot line:
scsi=2,0(0,0)Saturn15:/scsi/current/vxWorks e=172.24.1.114:ffffff00 b=0.0.0.0 h=172.24.1.114 g=172.24.1.1 u=test s=/scsi/current/startup o=ei
value = 153 = 0x99

auto-reboot after 60 seconds of idle time
[VxWorks Boot]: p

boot device : scsi=2,0
unit number : 0
processor number : 0
host name : Saturn15
file name : /scsi/current/vxWorks
inet on ethernet (e) : 172.24.1.104:ffffff00
host inet (h) : 172.24.1.114
gateway inet (g) : 172.24.1.1
user (u) : test
flags (f) : 0x0
target name (tn) : CLMBOH11-PSX-05
startup script (s) : /scsi/current/startup
other (o) : ei

/scsi// - disk check in progress ...
/scsi// - Volume is OK

total # of clusters: 62,463
# of free clusters: 25,968
# of bad clusters: 0
total free space: 51,936 Kb
max contiguous free space: 9,906,176 bytes
# of files: 275
# of folders: 14
total bytes in files: 72,646 Kb
# of lost chains: 0
total bytes in lost chains: 0

_func_fppTaskRegsShow=0
fpRegName=0

cd "/scsi/current/bin"

ld < sysCmn.lib
ld < snmpAgt.lib
ld < prmComm.lib
ld < cac.lib
ld < sysMisc.lib
ld < connMgr.lib
ld < atmMgmt.lib
ld < gcc.lib
ld < console.lib
ld < strm.lib
ld < epServer.lib
ld < im.lib
ld < pnni.lib
ld < atmRoute.lib
ld < atmSvc.lib
ld < statsMgr.lib
ld < frMgmt.lib
ld < ioDbg.lib
ld < fec.lib
ld < cellTest.lib
ld < lapd.lib
ld < t1Sig.lib
ld < oam.lib
ld < spvc.lib
ld < ash.lib
ld < viprMgr.lib
ld < ilmiHdlr.lib
ld < fwc.lib
ld < cfgMgr.lib

#Keep module load info for debugging
rename "/scsi/logs/module.txt", "/scsi/logs/module.bak"
moduleShow > /scsi/logs/module.txt

rootInit 0