VMS831H1I_UPDATE V2.0 v. zx2000: [SYS$LDR]UPDATE-V0200_FAIL_SYS$EFI.BAK - VMS

This is a discussion on VMS831H1I_UPDATE V2.0 v. zx2000: [SYS$LDR]UPDATE-V0200_FAIL_SYS$EFI.BAK - VMS ; Anyone have any ideas on this one? IT $ tcpip show vers HP TCP/IP Services for OpenVMS Industry Standard 64 Version V5.6 - ECO 2 on an HP zx2000 (900MHz/1.5MB) running OpenVMS V8.3-1H1 IT $ prod inst VMS831H1I_UPDATE Performing product ...

+ Reply to Thread
Results 1 to 3 of 3

Thread: VMS831H1I_UPDATE V2.0 v. zx2000: [SYS$LDR]UPDATE-V0200_FAIL_SYS$EFI.BAK

  1. VMS831H1I_UPDATE V2.0 v. zx2000: [SYS$LDR]UPDATE-V0200_FAIL_SYS$EFI.BAK

    Anyone have any ideas on this one?

    IT $ tcpip show vers

    HP TCP/IP Services for OpenVMS Industry Standard 64 Version V5.6 - ECO 2
    on an HP zx2000 (900MHz/1.5MB) running OpenVMS V8.3-1H1

    IT $ prod inst VMS831H1I_UPDATE

    Performing product kit validation of signed kits ...
    %PCSI-I-VALPASSED, validation of IT$DKA100:[patch.v8r3s1h1]HP-I64VMS-VMS831H1I_U
    PDATE-V0200--4.PCSI$COMPRESSED;1 succeeded

    The following product has been selected:
    HP I64VMS VMS831H1I_UPDATE V2.0 Patch (remedial update)
    [...]
    Execution phase starting ...

    The following product will be installed to destination:
    HP I64VMS VMS831H1I_UPDATE V2.0 DISK$VMS083IT:[VMS$COMMON.]

    Portion done: 0%...10%...20%...30%...40%...50%...60%...70%...80% ...90%
    %EFI-I-COPIED, copied FS0:\efi\vms\IPB.EXE to PCSI$DESTINATION:[SYSEXE]FLAG_IPB.
    EXE
    %EFI-I-COPIED, copied PCSI$DESTINATION:[SYSEXE]IPB.EXE to FS0:\efi\vms\
    %EFI-I-COPIED, copied FS0:\efi\vms\IPB.EXE to PCSI$DESTINATION:[SYSEXE]CHECK_IPB
    .EXE
    %EFI-I-COPIED, copied FS0:\efi\vms\VMS_LOADER.EFI to PCSI$DESTINATION:[SYSEXE]CH
    ECK_VMS_LOADER.EFI

    * INSTALLATION FAILURE *

    The checksum comparison between provided files and the
    updated [SYS$$LDR]SYS$EFI.SYS has failed. A copy of the
    failed SYS$EFI.SYS has been copied to
    [SYS$LDR]UPDATE-V0200_FAIL_SYS$EFI.BAK. DO NOT DELETE this file
    Contact your HP Services representative with a pointer to this
    file for assistance in resolving this problem.

    Installation Aborting


    *** WARNING ***

    Update of the [SYS$LDR]SYS$EFI.SYS partition has failed. All
    changes made by this kit are being backed out and the system
    returned to its pre-kit installation state.

    %PCSI-E-S_CPCAN, command procedure from kit requested unconditional
    termination

    Recovery pass starting ...


    Recovery pass concluded

    %PCSI-E-S_OPFAIL, operation failed
    %PCSIUI-E-ABORT, operation terminated due to an unrecoverable error condition


    Being a peon, I'm not sure how I should "Contact [my] HP Services
    representative", but I'm open to suggestions.

    Don't these things get tested on unsupported systems nowadays?


    IT $ dg SYS$SYSROOT:[SYS$LDR]*SYS$EFI*

    Directory SYS$COMMON:[SYS$LDR]

    DO_NOT_DELETE_ADDENDUM-V0100_SYS$EFI.BAK;1
    260190 19-JAN-2008 22:55:11.55 (RWED,RWED,RE,)
    DO_NOT_DELETE_UPDATE-V0200_SYS$EFI.BAK;1
    260190 25-SEP-2008 14:55:23.99 (RWED,RWED,RE,)
    SYS$EFI.SYS;1 256000 18-JAN-2008 07:56:37.04 (RWED,RWED,RE,)
    UPDATE-V0200_FAIL_SYS$EFI.BAK;1
    260190 25-SEP-2008 15:06:35.71 (RWED,RWED,RE,)

    Total of 4 files, 1036570 blocks.

    ------------------------------------------------------------------------

    Steven M. Schweda sms@antinode-info
    382 South Warwick Street (+1) 651-699-9818
    Saint Paul MN 55105-2547

  2. Re: VMS831H1I_UPDATE V2.0 v. zx2000: [SYS$LDR]UPDATE-V0200_FAIL_SYS$EFI.BAK

    Steven M. Schweda wrote:

    > Don't these things get tested on unsupported systems nowadays?


    On *un*-supported systems ?
    Have they ever been ?

  3. Re: VMS831H1I_UPDATE V2.0 v. zx2000: [SYS$LDR]UPDATE-V0200_FAIL_SYS$EFI.BAK

    In article <08092515103001_20202860@antinode.info>, sms@antinode.info (Steven M. Schweda) writes:
    > Anyone have any ideas on this one?
    >


    Yup. Install Update 1 first. (I just got email from the openvms.org patch list
    about this, but I didn't save it since I'd already had a successful install of
    update 2. There's some specific thing in Update 1 that you could install by
    itself, but I forget what it is.)

    -- Alan


    >IT $ tcpip show vers
    >
    > HP TCP/IP Services for OpenVMS Industry Standard 64 Version V5.6 - ECO 2
    > on an HP zx2000 (900MHz/1.5MB) running OpenVMS V8.3-1H1
    >
    >IT $ prod inst VMS831H1I_UPDATE
    >
    >Performing product kit validation of signed kits ...
    >%PCSI-I-VALPASSED, validation of IT$DKA100:[patch.v8r3s1h1]HP-I64VMS-VMS831H1I_U
    >PDATE-V0200--4.PCSI$COMPRESSED;1 succeeded
    >
    >The following product has been selected:
    > HP I64VMS VMS831H1I_UPDATE V2.0 Patch (remedial update)
    >[...]
    >Execution phase starting ...
    >
    >The following product will be installed to destination:
    > HP I64VMS VMS831H1I_UPDATE V2.0 DISK$VMS083IT:[VMS$COMMON.]
    >
    >Portion done: 0%...10%...20%...30%...40%...50%...60%...70%...80% ...90%
    >%EFI-I-COPIED, copied FS0:\efi\vms\IPB.EXE to PCSI$DESTINATION:[SYSEXE]FLAG_IPB.
    >EXE
    >%EFI-I-COPIED, copied PCSI$DESTINATION:[SYSEXE]IPB.EXE to FS0:\efi\vms\
    >%EFI-I-COPIED, copied FS0:\efi\vms\IPB.EXE to PCSI$DESTINATION:[SYSEXE]CHECK_IPB
    >EXE
    >%EFI-I-COPIED, copied FS0:\efi\vms\VMS_LOADER.EFI to PCSI$DESTINATION:[SYSEXE]CH
    >ECK_VMS_LOADER.EFI
    >
    >* INSTALLATION FAILURE *
    >
    >The checksum comparison between provided files and the
    >updated [SYS$$LDR]SYS$EFI.SYS has failed. A copy of the
    >failed SYS$EFI.SYS has been copied to
    >[SYS$LDR]UPDATE-V0200_FAIL_SYS$EFI.BAK. DO NOT DELETE this file
    >Contact your HP Services representative with a pointer to this
    >file for assistance in resolving this problem.
    >
    >Installation Aborting
    >
    >
    > *** WARNING ***
    >
    >Update of the [SYS$LDR]SYS$EFI.SYS partition has failed. All
    >changes made by this kit are being backed out and the system
    >returned to its pre-kit installation state.
    >
    >%PCSI-E-S_CPCAN, command procedure from kit requested unconditional
    >termination
    >
    >Recovery pass starting ...
    >
    >
    >Recovery pass concluded
    >
    >%PCSI-E-S_OPFAIL, operation failed
    >%PCSIUI-E-ABORT, operation terminated due to an unrecoverable error condition
    >
    >
    > Being a peon, I'm not sure how I should "Contact [my] HP Services
    >representative", but I'm open to suggestions.
    >
    > Don't these things get tested on unsupported systems nowadays?
    >
    >
    >IT $ dg SYS$SYSROOT:[SYS$LDR]*SYS$EFI*
    >
    >Directory SYS$COMMON:[SYS$LDR]
    >
    >DO_NOT_DELETE_ADDENDUM-V0100_SYS$EFI.BAK;1
    > 260190 19-JAN-2008 22:55:11.55 (RWED,RWED,RE,)
    >DO_NOT_DELETE_UPDATE-V0200_SYS$EFI.BAK;1
    > 260190 25-SEP-2008 14:55:23.99 (RWED,RWED,RE,)
    >SYS$EFI.SYS;1 256000 18-JAN-2008 07:56:37.04 (RWED,RWED,RE,)
    >UPDATE-V0200_FAIL_SYS$EFI.BAK;1
    > 260190 25-SEP-2008 15:06:35.71 (RWED,RWED,RE,)
    >
    >Total of 4 files, 1036570 blocks.
    >
    >------------------------------------------------------------------------
    >
    > Steven M. Schweda sms@antinode-info
    > 382 South Warwick Street (+1) 651-699-9818
    > Saint Paul MN 55105-2547


+ Reply to Thread