URGENT HELP please ! Multinet won't start on VMS 8.3 IA64 - VMS

This is a discussion on URGENT HELP please ! Multinet won't start on VMS 8.3 IA64 - VMS ; Hi Our production system is down, and Process software office is closed... Multinet won't start on our Itanium RX-3600 We already raised GH_EXEC_DATA to 4096 and that doesn't help Can someone help ? Thanks Sorry for cross-posting, don't know who ...

+ Reply to Thread
Results 1 to 5 of 5

Thread: URGENT HELP please ! Multinet won't start on VMS 8.3 IA64

  1. URGENT HELP please ! Multinet won't start on VMS 8.3 IA64

    Hi

    Our production system is down, and Process software office is closed...

    Multinet won't start on our Itanium RX-3600

    We already raised GH_EXEC_DATA to 4096 and that doesn't help

    Can someone help ?

    Thanks

    Sorry for cross-posting, don't know who can help me here...

    Syltrem
    no zulu to reach me directly

    $ MultiNet Load/Silent/Network_Image=MULTINET_KERNEL

    %MULTINET-W-KRNNOTLOADED, kernel MULTINET_ip_DEVICE_CONFIG not loaded

    %SYSTEM-F-ACCVIO, access violation, reason mask=A0, virtual
    address=000000000000001B, PC=000002E000030300, PS=43790036

    Improperly handled condition, image exit forced.

    Signal arguments: Number = 0000000000000003

    Name = 000000000000000C

    00000000000315A0

    000000000000001B

    Register dump:

    R0 = 0000000000000000 R1 = 000000007B546000 R2 = 000000007FF43ED0

    R3 = 0000000000000000 R4 = 000000007FFCF818 R5 = 000000007FFCF8B0

    R6 = 0000000010000001 R7 = 0000000000000001 R8 = 00000000000001BC

    R9 = 0000000000000000 R10 = 000000007ACC18E0 R11 = 000000007ACC18E8

    SP = 000000007ACC1890 TP = 000000007B5341C8 R14 = 00000000002A0000

    R15 = 00000000000B01F0 R16 = FFFFFFFF841E9C50 R17 = 000000007FF43F78

    R18 = 0000000000000000 R19 = 0000000000000000 R20 = 0000000000000003

    R21 = 0000000000000000 R22 = 0000000000000000 R23 = E000000000000050

    R24 = 0000000000000004 R25 = 0000000000000001 R26 = FFFFFFFFA11DA040

    R27 = FFFFFFFFA11DA07C R28 = 000000000000000F R29 = E000000000000000

    R30 = 000000000000000F R31 = 0000000000000000 PC = 00000000000315A0

    BSP/STORE = 000007FDBFFD41C8 / 000007FDBFFD41C8 PSR = 0000101308026010

    IIPA = 0000000000000000

    B0 = 00000000000315A0 B6 = FFFFFFFF841E9C50 B7 = FFFFF80409C053A0

    Interrupted Frame RSE Backing Store, Size = 26 registers

    R32 = 0000000000020000 R33 = 0000000000020B18 R34 = 00000000000A002C

    R35 = 000000000002A1E0 R36 = 0000000000010070 R37 = 0000000000070048

    R38 = 0000000000000003 R39 = 0000000000010020 R40 = 00000000080280CC

    R41 = 000000007ACC1989 R42 = 000000000000005F R43 = 54454E49544C554D

    R44 = 0000000008028188 R45 = 0000000000000000 R46 = 0000000000000004

    R47 = 00000000000300C0 R48 = C000000000000491 R49 = 00000000002A0000

    R50 = 000000000000000C R51 = 0000000000000001 R52 = 0000000000020B28

    R53 = 0000000000000001 R54 = 000000000000004E R55 = 0000000000000046

    R56 = 0000000000000049 R57 = 0000000000000047



  2. CANCEL Re: URGENT HELP please ! Multinet won't start on VMS 8.3 IA64

    It's ok now.

    I have no idea what happened.

    I had changed some SYSGEN parameters and executed autogen

    I restored the IA64VMSSYS.OLD (to .PAR) and ran the autogen again (just like
    the 1st time) and all was ok.
    I just made sure about 1 parameter set specifically for Multinet
    (GH_EXEC_DATA) , to have a MIN_ for it in MODPARAMS.DAT as it might be the
    one that has not been modified properly using MODPARAMS before.
    Can't remember the value of it when Multinet wouldn't start so can't confirm

    All is fine now.
    Syltrem

    "Syltrem" a écrit dans le message de news:
    13kutik2dj2kh51@corp.supernews.com...
    > Hi
    >
    > Our production system is down, and Process software office is closed...
    >
    > Multinet won't start on our Itanium RX-3600
    >
    > We already raised GH_EXEC_DATA to 4096 and that doesn't help
    >
    > Can someone help ?
    >
    > Thanks
    >
    > Sorry for cross-posting, don't know who can help me here...
    >
    > Syltrem
    > no zulu to reach me directly
    >
    > $ MultiNet Load/Silent/Network_Image=MULTINET_KERNEL
    >
    > %MULTINET-W-KRNNOTLOADED, kernel MULTINET_ip_DEVICE_CONFIG not loaded
    >
    > %SYSTEM-F-ACCVIO, access violation, reason mask=A0, virtual
    > address=000000000000001B, PC=000002E000030300, PS=43790036
    >
    > Improperly handled condition, image exit forced.
    >
    > Signal arguments: Number = 0000000000000003
    >
    > Name = 000000000000000C
    >
    > 00000000000315A0
    >
    > 000000000000001B
    >
    > Register dump:
    >
    > R0 = 0000000000000000 R1 = 000000007B546000 R2 = 000000007FF43ED0
    >
    > R3 = 0000000000000000 R4 = 000000007FFCF818 R5 = 000000007FFCF8B0
    >
    > R6 = 0000000010000001 R7 = 0000000000000001 R8 = 00000000000001BC
    >
    > R9 = 0000000000000000 R10 = 000000007ACC18E0 R11 = 000000007ACC18E8
    >
    > SP = 000000007ACC1890 TP = 000000007B5341C8 R14 = 00000000002A0000
    >
    > R15 = 00000000000B01F0 R16 = FFFFFFFF841E9C50 R17 = 000000007FF43F78
    >
    > R18 = 0000000000000000 R19 = 0000000000000000 R20 = 0000000000000003
    >
    > R21 = 0000000000000000 R22 = 0000000000000000 R23 = E000000000000050
    >
    > R24 = 0000000000000004 R25 = 0000000000000001 R26 = FFFFFFFFA11DA040
    >
    > R27 = FFFFFFFFA11DA07C R28 = 000000000000000F R29 = E000000000000000
    >
    > R30 = 000000000000000F R31 = 0000000000000000 PC = 00000000000315A0
    >
    > BSP/STORE = 000007FDBFFD41C8 / 000007FDBFFD41C8 PSR = 0000101308026010
    >
    > IIPA = 0000000000000000
    >
    > B0 = 00000000000315A0 B6 = FFFFFFFF841E9C50 B7 = FFFFF80409C053A0
    >
    > Interrupted Frame RSE Backing Store, Size = 26 registers
    >
    > R32 = 0000000000020000 R33 = 0000000000020B18 R34 = 00000000000A002C
    >
    > R35 = 000000000002A1E0 R36 = 0000000000010070 R37 = 0000000000070048
    >
    > R38 = 0000000000000003 R39 = 0000000000010020 R40 = 00000000080280CC
    >
    > R41 = 000000007ACC1989 R42 = 000000000000005F R43 = 54454E49544C554D
    >
    > R44 = 0000000008028188 R45 = 0000000000000000 R46 = 0000000000000004
    >
    > R47 = 00000000000300C0 R48 = C000000000000491 R49 = 00000000002A0000
    >
    > R50 = 000000000000000C R51 = 0000000000000001 R52 = 0000000000020B28
    >
    > R53 = 0000000000000001 R54 = 000000000000004E R55 = 0000000000000046
    >
    > R56 = 0000000000000049 R57 = 0000000000000047
    >
    >




  3. Re: URGENT HELP please ! Multinet won't start on VMS 8.3 IA64

    you need to increase

    GH_EXEC_code as well (need someplace to load the multinet kernel)

    Not sure that is the problem though



    Syltrem wrote:
    > Hi
    >
    > Our production system is down, and Process software office is closed...
    >
    > Multinet won't start on our Itanium RX-3600
    >
    > We already raised GH_EXEC_DATA to 4096 and that doesn't help
    >
    > Can someone help ?
    >
    > Thanks
    >
    > Sorry for cross-posting, don't know who can help me here...
    >
    > Syltrem
    > no zulu to reach me directly
    >
    > $ MultiNet Load/Silent/Network_Image=MULTINET_KERNEL
    >
    > %MULTINET-W-KRNNOTLOADED, kernel MULTINET_ip_DEVICE_CONFIG not loaded
    >
    > %SYSTEM-F-ACCVIO, access violation, reason mask=A0, virtual
    > address=000000000000001B, PC=000002E000030300, PS=43790036
    >
    > Improperly handled condition, image exit forced.
    >
    > Signal arguments: Number = 0000000000000003
    >
    > Name = 000000000000000C
    >
    > 00000000000315A0
    >
    > 000000000000001B
    >
    > Register dump:
    >
    > R0 = 0000000000000000 R1 = 000000007B546000 R2 = 000000007FF43ED0
    >
    > R3 = 0000000000000000 R4 = 000000007FFCF818 R5 = 000000007FFCF8B0
    >
    > R6 = 0000000010000001 R7 = 0000000000000001 R8 = 00000000000001BC
    >
    > R9 = 0000000000000000 R10 = 000000007ACC18E0 R11 = 000000007ACC18E8
    >
    > SP = 000000007ACC1890 TP = 000000007B5341C8 R14 = 00000000002A0000
    >
    > R15 = 00000000000B01F0 R16 = FFFFFFFF841E9C50 R17 = 000000007FF43F78
    >
    > R18 = 0000000000000000 R19 = 0000000000000000 R20 = 0000000000000003
    >
    > R21 = 0000000000000000 R22 = 0000000000000000 R23 = E000000000000050
    >
    > R24 = 0000000000000004 R25 = 0000000000000001 R26 = FFFFFFFFA11DA040
    >
    > R27 = FFFFFFFFA11DA07C R28 = 000000000000000F R29 = E000000000000000
    >
    > R30 = 000000000000000F R31 = 0000000000000000 PC = 00000000000315A0
    >
    > BSP/STORE = 000007FDBFFD41C8 / 000007FDBFFD41C8 PSR = 0000101308026010
    >
    > IIPA = 0000000000000000
    >
    > B0 = 00000000000315A0 B6 = FFFFFFFF841E9C50 B7 = FFFFF80409C053A0
    >
    > Interrupted Frame RSE Backing Store, Size = 26 registers
    >
    > R32 = 0000000000020000 R33 = 0000000000020B18 R34 = 00000000000A002C
    >
    > R35 = 000000000002A1E0 R36 = 0000000000010070 R37 = 0000000000070048
    >
    > R38 = 0000000000000003 R39 = 0000000000010020 R40 = 00000000080280CC
    >
    > R41 = 000000007ACC1989 R42 = 000000000000005F R43 = 54454E49544C554D
    >
    > R44 = 0000000008028188 R45 = 0000000000000000 R46 = 0000000000000004
    >
    > R47 = 00000000000300C0 R48 = C000000000000491 R49 = 00000000002A0000
    >
    > R50 = 000000000000000C R51 = 0000000000000001 R52 = 0000000000020B28
    >
    > R53 = 0000000000000001 R54 = 000000000000004E R55 = 0000000000000046
    >
    > R56 = 0000000000000049 R57 = 0000000000000047
    >
    >
    >
    >
    >
    >


  4. Re: URGENT HELP please ! Multinet won't start on VMS 8.3 IA64

    This is what I have in my modparams.dat

    ADD_GH_EXEC_CODE=90 ! 83 ! MN 5.2
    ADD_GH_EXEC_CODE=1024
    MIN_GH_EXEC_CODE=4183 ! for MN v5.2
    ADD_GH_EXEC_DATA=256 ! was 128 - needed for v8.3
    ADD_GH_EXEC_DATA=472 ! added for MN 5.2
    MIN_GH_EXEC_DATA=1496 ! for MN v5.2
    ADD_GH_RES_CODE=1024
    ADD_GH_RES_DATA=128

    Maybe a bit overboard, but I had a similar incident. This is VMS/I64
    v8.3

    -Ross-

    On Nov 30, 2007, at 7:14 AM, Jim Mehlhop wrote:

    > you need to increase
    >
    > GH_EXEC_code as well (need someplace to load the multinet kernel)
    >
    > Not sure that is the problem though
    >
    >
    >
    > Syltrem wrote:
    >> Hi
    >>
    >> Our production system is down, and Process software office is
    >> closed...
    >>
    >> Multinet won't start on our Itanium RX-3600
    >>
    >> We already raised GH_EXEC_DATA to 4096 and that doesn't help
    >>
    >> Can someone help ?
    >>
    >> Thanks
    >>
    >> Sorry for cross-posting, don't know who can help me here...
    >>
    >> Syltrem
    >> no zulu to reach me directly
    >>
    >> $ MultiNet Load/Silent/Network_Image=MULTINET_KERNEL
    >>
    >> %MULTINET-W-KRNNOTLOADED, kernel MULTINET_ip_DEVICE_CONFIG not loaded
    >>
    >> %SYSTEM-F-ACCVIO, access violation, reason mask=A0, virtual
    >> address=000000000000001B, PC=000002E000030300, PS=43790036
    >>
    >> Improperly handled condition, image exit forced.
    >>
    >> Signal arguments: Number = 0000000000000003
    >>
    >> Name = 000000000000000C
    >>
    >> 00000000000315A0
    >>
    >> 000000000000001B
    >>
    >> Register dump:
    >>
    >> R0 = 0000000000000000 R1 = 000000007B546000 R2 = 000000007FF43ED0
    >>
    >> R3 = 0000000000000000 R4 = 000000007FFCF818 R5 = 000000007FFCF8B0
    >>
    >> R6 = 0000000010000001 R7 = 0000000000000001 R8 = 00000000000001BC
    >>
    >> R9 = 0000000000000000 R10 = 000000007ACC18E0 R11 = 000000007ACC18E8
    >>
    >> SP = 000000007ACC1890 TP = 000000007B5341C8 R14 = 00000000002A0000
    >>
    >> R15 = 00000000000B01F0 R16 = FFFFFFFF841E9C50 R17 = 000000007FF43F78
    >>
    >> R18 = 0000000000000000 R19 = 0000000000000000 R20 = 0000000000000003
    >>
    >> R21 = 0000000000000000 R22 = 0000000000000000 R23 = E000000000000050
    >>
    >> R24 = 0000000000000004 R25 = 0000000000000001 R26 = FFFFFFFFA11DA040
    >>
    >> R27 = FFFFFFFFA11DA07C R28 = 000000000000000F R29 = E000000000000000
    >>
    >> R30 = 000000000000000F R31 = 0000000000000000 PC = 00000000000315A0
    >>
    >> BSP/STORE = 000007FDBFFD41C8 / 000007FDBFFD41C8 PSR =
    >> 0000101308026010
    >>
    >> IIPA = 0000000000000000
    >>
    >> B0 = 00000000000315A0 B6 = FFFFFFFF841E9C50 B7 = FFFFF80409C053A0
    >>
    >> Interrupted Frame RSE Backing Store, Size = 26 registers
    >>
    >> R32 = 0000000000020000 R33 = 0000000000020B18 R34 = 00000000000A002C
    >>
    >> R35 = 000000000002A1E0 R36 = 0000000000010070 R37 = 0000000000070048
    >>
    >> R38 = 0000000000000003 R39 = 0000000000010020 R40 = 00000000080280CC
    >>
    >> R41 = 000000007ACC1989 R42 = 000000000000005F R43 = 54454E49544C554D
    >>
    >> R44 = 0000000008028188 R45 = 0000000000000000 R46 = 0000000000000004
    >>
    >> R47 = 00000000000300C0 R48 = C000000000000491 R49 = 00000000002A0000
    >>
    >> R50 = 000000000000000C R51 = 0000000000000001 R52 = 0000000000020B28
    >>
    >> R53 = 0000000000000001 R54 = 000000000000004E R55 = 0000000000000046
    >>
    >> R56 = 0000000000000049 R57 = 0000000000000047
    >>
    >>
    >>
    >>
    >>
    >>



  5. RE: URGENT HELP please ! Multinet won't start on VMS 8.3 IA64

    I don't know if it's related but our RX3600 was crashing with this
    error:

    Crash Time: 13-AUG-2007 14:56:18.04
    Bugcheck Type: RESEXH, Resources exhausted, system shutting down
    Node: CANTVI (Cluster)
    CPU Type: HP rx3600 (1.40GHz/6.0MB)
    VMS Version: V8.3
    Current Process: TP_SERVER


    The problem was fixed with these parameters:

    MIN_FREELIM = 5200
    MIN_BORROWLIM = 10400
    MIN_FREEGOAL = 15700
    MIN_GROWLIM = 21000

    I mention this because I have never had to touch these parameters on
    Alpha hardware


    --
    Regards, Malcolm Smeaton
    University of Canterbury

    > -----Original Message-----
    > From: Syltrem [mailto:syltremzulu@videotron.ca]
    > Sent: Friday, 30 November 2007 3:33 p.m.
    > To: info-multinet@process.com
    > Subject: URGENT HELP please ! Multinet won't start on VMS 8.3 IA64
    >
    > Hi
    >
    > Our production system is down, and Process software office is

    closed...
    >
    > Multinet won't start on our Itanium RX-3600
    >
    > We already raised GH_EXEC_DATA to 4096 and that doesn't help
    >
    > Can someone help ?
    >
    > Thanks
    >
    > Sorry for cross-posting, don't know who can help me here...
    >
    > Syltrem
    > no zulu to reach me directly
    >
    > $ MultiNet Load/Silent/Network_Image=MULTINET_KERNEL
    >
    > %MULTINET-W-KRNNOTLOADED, kernel MULTINET_ip_DEVICE_CONFIG not loaded
    >
    > %SYSTEM-F-ACCVIO, access violation, reason mask=A0, virtual
    > address=000000000000001B, PC=000002E000030300, PS=43790036
    >
    > Improperly handled condition, image exit forced.
    >
    > Signal arguments: Number = 0000000000000003
    >
    > Name = 000000000000000C
    >
    > 00000000000315A0
    >
    > 000000000000001B
    >
    > Register dump:
    >
    > R0 = 0000000000000000 R1 = 000000007B546000 R2 = 000000007FF43ED0
    >
    > R3 = 0000000000000000 R4 = 000000007FFCF818 R5 = 000000007FFCF8B0
    >
    > R6 = 0000000010000001 R7 = 0000000000000001 R8 = 00000000000001BC
    >
    > R9 = 0000000000000000 R10 = 000000007ACC18E0 R11 = 000000007ACC18E8
    >
    > SP = 000000007ACC1890 TP = 000000007B5341C8 R14 = 00000000002A0000
    >
    > R15 = 00000000000B01F0 R16 = FFFFFFFF841E9C50 R17 = 000000007FF43F78
    >
    > R18 = 0000000000000000 R19 = 0000000000000000 R20 = 0000000000000003
    >
    > R21 = 0000000000000000 R22 = 0000000000000000 R23 = E000000000000050
    >
    > R24 = 0000000000000004 R25 = 0000000000000001 R26 = FFFFFFFFA11DA040
    >
    > R27 = FFFFFFFFA11DA07C R28 = 000000000000000F R29 = E000000000000000
    >
    > R30 = 000000000000000F R31 = 0000000000000000 PC = 00000000000315A0
    >
    > BSP/STORE = 000007FDBFFD41C8 / 000007FDBFFD41C8 PSR = 0000101308026010
    >
    > IIPA = 0000000000000000
    >
    > B0 = 00000000000315A0 B6 = FFFFFFFF841E9C50 B7 = FFFFF80409C053A0
    >
    > Interrupted Frame RSE Backing Store, Size = 26 registers
    >
    > R32 = 0000000000020000 R33 = 0000000000020B18 R34 = 00000000000A002C
    >
    > R35 = 000000000002A1E0 R36 = 0000000000010070 R37 = 0000000000070048
    >
    > R38 = 0000000000000003 R39 = 0000000000010020 R40 = 00000000080280CC
    >
    > R41 = 000000007ACC1989 R42 = 000000000000005F R43 = 54454E49544C554D
    >
    > R44 = 0000000008028188 R45 = 0000000000000000 R46 = 0000000000000004
    >
    > R47 = 00000000000300C0 R48 = C000000000000491 R49 = 00000000002A0000
    >
    > R50 = 000000000000000C R51 = 0000000000000001 R52 = 0000000000020B28
    >
    > R53 = 0000000000000001 R54 = 000000000000004E R55 = 0000000000000046
    >
    > R56 = 0000000000000049 R57 = 0000000000000047
    >
    >



+ Reply to Thread