Pls tell me how to change the vcs engine boot parameter - Veritas Cluster Server

This is a discussion on Pls tell me how to change the vcs engine boot parameter - Veritas Cluster Server ; For some unknown reason ,my vcs engine startup arguments is not onenode any more.Acturally I can change the parameter using command "hastart -onenode" manually.But I want to know where can I change the argument="one node" ,so that the vcs engine ...

+ Reply to Thread
Results 1 to 4 of 4

Thread: Pls tell me how to change the vcs engine boot parameter

  1. Pls tell me how to change the vcs engine boot parameter


    For some unknown reason ,my vcs engine startup arguments is not onenode any
    more.Acturally I can change the parameter using command "hastart -onenode"
    manually.But I want to know where can I change the argument="one node" ,so
    that the vcs engine can startup automatically. My platform is sun solaris
    9.

    Thanks more.
    2006/07/28 23:38:31 VCS NOTICE V-16-1-11050 VCS engine version=4.0
    2006/07/28 23:38:31 VCS NOTICE V-16-1-11051 VCS engine join version=4.1
    2006/07/28 23:38:31 VCS NOTICE V-16-1-11052 VCS engine pstamp=4.0 07/23/04-15:56:00
    2006/07/28 23:38:31 VCS NOTICE V-16-1-10114 Opening GAB library
    2006/07/28 23:38:31 VCS NOTICE V-16-1-10619 'HAD' starting on: ztenms01
    2006/07/28 23:38:32 VCS INFO V-16-1-10125 GAB timeout set to 15000 ms
    2006/07/28 23:38:32 VCS ERROR V-16-1-10116 GabHandle:pen failed errno =
    261
    2006/07/28 23:38:32 VCS ERROR V-16-1-11033 GAB open failed. Exiting
    2006/07/29 01:55:33 VCS NOTICE V-16-1-11022 VCS engine (had) started
    2006/07/29 01:55:33 VCS NOTICE V-16-1-11027 VCS engine startup arguments=-onenode

    2006/07/29 01:55:33 VCS NOTICE V-16-1-11022 VCS engine (had) started
    2006/07/29 01:55:33 VCS NOTICE V-16-1-11027 VCS engine startup arguments=-onenode

    2006/07/29 01:56:10 VCS NOTICE V-16-1-11050 VCS engine version=4.0
    2006/07/29 01:56:10 VCS NOTICE V-16-1-11051 VCS engine join version=4.1
    2006/07/29 01:56:10 VCS NOTICE V-16-1-11052 VCS engine pstamp=4.0 07/23/04-15:56:00
    2006/07/29 01:56:22 VCS NOTICE V-16-1-10115 Using GABSIM

  2. Re: Pls tell me how to change the vcs engine boot parameter

    Fix GAB to start

    If there is no GAB, VCS will not be able to communicate with any other
    nodes and thus will start in a single node cluster.

    OK, so first fix /etc/llttab and /etc/llthosts (both machines must have
    the same links and the same cluster id and the hosts file must know
    about the other node), then fix /etc/gabtab to something like :
    /sbin/gabconfig -n2


    This will make sure that GAB will only start once there are 2 modes in
    the cluster.

    OK, to check if LLT has started properly: lltstat -vnv
    to check if GAB started : gabconfig -a



    Mike Wang wrote:
    > For some unknown reason ,my vcs engine startup arguments is not onenode any
    > more.Acturally I can change the parameter using command "hastart -onenode"
    > manually.But I want to know where can I change the argument="one node" ,so
    > that the vcs engine can startup automatically. My platform is sun solaris
    > 9.
    >
    > Thanks more.
    > 2006/07/28 23:38:31 VCS NOTICE V-16-1-11050 VCS engine version=4.0
    > 2006/07/28 23:38:31 VCS NOTICE V-16-1-11051 VCS engine join version=4.1
    > 2006/07/28 23:38:31 VCS NOTICE V-16-1-11052 VCS engine pstamp=4.0 07/23/04-15:56:00
    > 2006/07/28 23:38:31 VCS NOTICE V-16-1-10114 Opening GAB library
    > 2006/07/28 23:38:31 VCS NOTICE V-16-1-10619 'HAD' starting on: ztenms01
    > 2006/07/28 23:38:32 VCS INFO V-16-1-10125 GAB timeout set to 15000 ms
    > 2006/07/28 23:38:32 VCS ERROR V-16-1-10116 GabHandle:pen failed errno =
    > 261
    > 2006/07/28 23:38:32 VCS ERROR V-16-1-11033 GAB open failed. Exiting
    > 2006/07/29 01:55:33 VCS NOTICE V-16-1-11022 VCS engine (had) started
    > 2006/07/29 01:55:33 VCS NOTICE V-16-1-11027 VCS engine startup arguments=-onenode
    >
    > 2006/07/29 01:55:33 VCS NOTICE V-16-1-11022 VCS engine (had) started
    > 2006/07/29 01:55:33 VCS NOTICE V-16-1-11027 VCS engine startup arguments=-onenode
    >
    > 2006/07/29 01:56:10 VCS NOTICE V-16-1-11050 VCS engine version=4.0
    > 2006/07/29 01:56:10 VCS NOTICE V-16-1-11051 VCS engine join version=4.1
    > 2006/07/29 01:56:10 VCS NOTICE V-16-1-11052 VCS engine pstamp=4.0 07/23/04-15:56:00
    > 2006/07/29 01:56:22 VCS NOTICE V-16-1-10115 Using GABSIM


  3. Re: Pls tell me how to change the vcs engine boot parameter


    OK,thank you very much.
    yes I know what you said is in two servers, but I my vcs server need to boot
    as a single node.I don't want to let vcs server to communicate with others,so
    I don't want to config the gabtab and lltab.but now I can't boot up the
    vcs engine without the command "hastart -onenode". so I want to change something
    to let vcs engine boot up automatically.


    Me wrote:
    >Fix GAB to start
    >
    >If there is no GAB, VCS will not be able to communicate with any other
    >nodes and thus will start in a single node cluster.
    >
    >OK, so first fix /etc/llttab and /etc/llthosts (both machines must have


    >the same links and the same cluster id and the hosts file must know
    >about the other node), then fix /etc/gabtab to something like :
    >/sbin/gabconfig -n2
    >
    >
    >This will make sure that GAB will only start once there are 2 modes in
    >the cluster.
    >
    >OK, to check if LLT has started properly: lltstat -vnv
    >to check if GAB started : gabconfig -a
    >
    >
    >
    >Mike Wang wrote:
    >> For some unknown reason ,my vcs engine startup arguments is not onenode

    any
    >> more.Acturally I can change the parameter using command "hastart -onenode"
    >> manually.But I want to know where can I change the argument="one node"

    ,so
    >> that the vcs engine can startup automatically. My platform is sun solaris
    >> 9.
    >>
    >> Thanks more.
    >> 2006/07/28 23:38:31 VCS NOTICE V-16-1-11050 VCS engine version=4.0
    >> 2006/07/28 23:38:31 VCS NOTICE V-16-1-11051 VCS engine join version=4.1
    >> 2006/07/28 23:38:31 VCS NOTICE V-16-1-11052 VCS engine pstamp=4.0 07/23/04-15:56:00
    >> 2006/07/28 23:38:31 VCS NOTICE V-16-1-10114 Opening GAB library
    >> 2006/07/28 23:38:31 VCS NOTICE V-16-1-10619 'HAD' starting on: ztenms01
    >> 2006/07/28 23:38:32 VCS INFO V-16-1-10125 GAB timeout set to 15000 ms
    >> 2006/07/28 23:38:32 VCS ERROR V-16-1-10116 GabHandle:pen failed errno

    =
    >> 261
    >> 2006/07/28 23:38:32 VCS ERROR V-16-1-11033 GAB open failed. Exiting
    >> 2006/07/29 01:55:33 VCS NOTICE V-16-1-11022 VCS engine (had) started
    >> 2006/07/29 01:55:33 VCS NOTICE V-16-1-11027 VCS engine startup arguments=-onenode
    >>
    >> 2006/07/29 01:55:33 VCS NOTICE V-16-1-11022 VCS engine (had) started
    >> 2006/07/29 01:55:33 VCS NOTICE V-16-1-11027 VCS engine startup arguments=-onenode
    >>
    >> 2006/07/29 01:56:10 VCS NOTICE V-16-1-11050 VCS engine version=4.0
    >> 2006/07/29 01:56:10 VCS NOTICE V-16-1-11051 VCS engine join version=4.1
    >> 2006/07/29 01:56:10 VCS NOTICE V-16-1-11052 VCS engine pstamp=4.0 07/23/04-15:56:00
    >> 2006/07/29 01:56:22 VCS NOTICE V-16-1-10115 Using GABSIM



  4. Re: Pls tell me how to change the vcs engine boot parameter

    As mentioned before :


    Without GAB, VCS will always start with the -onenode option


    You can make GAB start without any other node by using the "-x" option

    (see man gabtab)

    Mike wang wrote:
    > OK,thank you very much.
    > yes I know what you said is in two servers, but I my vcs server need to boot
    > as a single node.I don't want to let vcs server to communicate with others,so
    > I don't want to config the gabtab and lltab.but now I can't boot up the
    > vcs engine without the command "hastart -onenode". so I want to change something
    > to let vcs engine boot up automatically.
    >
    >
    > Me wrote:
    >
    >>Fix GAB to start
    >>
    >>If there is no GAB, VCS will not be able to communicate with any other
    >>nodes and thus will start in a single node cluster.
    >>
    >>OK, so first fix /etc/llttab and /etc/llthosts (both machines must have

    >
    >
    >>the same links and the same cluster id and the hosts file must know
    >>about the other node), then fix /etc/gabtab to something like :
    >>/sbin/gabconfig -n2
    >>
    >>
    >>This will make sure that GAB will only start once there are 2 modes in
    >>the cluster.
    >>
    >>OK, to check if LLT has started properly: lltstat -vnv
    >>to check if GAB started : gabconfig -a
    >>
    >>
    >>
    >>Mike Wang wrote:
    >>
    >>>For some unknown reason ,my vcs engine startup arguments is not onenode

    >
    > any
    >
    >>>more.Acturally I can change the parameter using command "hastart -onenode"
    >>>manually.But I want to know where can I change the argument="one node"

    >
    > ,so
    >
    >>>that the vcs engine can startup automatically. My platform is sun solaris
    >>>9.
    >>>
    >>>Thanks more.
    >>>2006/07/28 23:38:31 VCS NOTICE V-16-1-11050 VCS engine version=4.0
    >>>2006/07/28 23:38:31 VCS NOTICE V-16-1-11051 VCS engine join version=4.1
    >>>2006/07/28 23:38:31 VCS NOTICE V-16-1-11052 VCS engine pstamp=4.0 07/23/04-15:56:00
    >>>2006/07/28 23:38:31 VCS NOTICE V-16-1-10114 Opening GAB library
    >>>2006/07/28 23:38:31 VCS NOTICE V-16-1-10619 'HAD' starting on: ztenms01
    >>>2006/07/28 23:38:32 VCS INFO V-16-1-10125 GAB timeout set to 15000 ms
    >>>2006/07/28 23:38:32 VCS ERROR V-16-1-10116 GabHandle:pen failed errno

    >
    > =
    >
    >>>261
    >>>2006/07/28 23:38:32 VCS ERROR V-16-1-11033 GAB open failed. Exiting
    >>>2006/07/29 01:55:33 VCS NOTICE V-16-1-11022 VCS engine (had) started
    >>>2006/07/29 01:55:33 VCS NOTICE V-16-1-11027 VCS engine startup arguments=-onenode
    >>>
    >>>2006/07/29 01:55:33 VCS NOTICE V-16-1-11022 VCS engine (had) started
    >>>2006/07/29 01:55:33 VCS NOTICE V-16-1-11027 VCS engine startup arguments=-onenode
    >>>
    >>>2006/07/29 01:56:10 VCS NOTICE V-16-1-11050 VCS engine version=4.0
    >>>2006/07/29 01:56:10 VCS NOTICE V-16-1-11051 VCS engine join version=4.1
    >>>2006/07/29 01:56:10 VCS NOTICE V-16-1-11052 VCS engine pstamp=4.0 07/23/04-15:56:00
    >>>2006/07/29 01:56:22 VCS NOTICE V-16-1-10115 Using GABSIM

    >
    >


+ Reply to Thread