Hello!

1.select server
2.select system sate
3.Connection as: the full name of the backupaccount (domainname\account)

"Andrew Horton" schrieb im Newsbeitrag
news:3dbf1422@hronntp01....
> This one is driving me round the bend. I've been working with WIndows for
> years and with this problem for a couiple of weeks. But am getting
> nowhere...
>
> I have two servers.
>
> 1. Windows 2000 Server SP3 with Backup Exec 8.5 Rev 3571 plus Exchange
> Agent. This machine is the backup server with tape drive attached
>
> 2. Windows 2000 Server SP3 with Exchange 2000 with Backup Exec Agent for
> Exec (push installed from server 1)
>
> Why oh why can I not backup Server 2's System State, but I can backup the
> Exchange Information Store on the same server. The error report I am
getting
> is:
> """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> Unable to attach to \\OBE-S2\System?State.
> Access is denied.
>
> To Backup or Restore System State, Administrator privileges are required.
>
>
> ^ ^ ^ ^ ^
> Unable to attach to \\OBE-S2\System?State.
> ^ ^ ^ ^ ^
> """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> I have tried running all the BE services (on both machines) as ServiceUser
> (who is a member of Administrators and Domain Admins) and as
Administrator.
> But I always get the same message. I have also tried making these users
> members of all the other Admin groups (Enterprise etc) and checked that
they
> have Logo as Service rights and even set their Primary Group as Domain
Admin
> (as instructed in article 234562.
>
> I DO HAVE ADMINISTRATOR PRIVILEGES! WHAT IS THE PROBLEM !!
>
> Any ideas guys (and girls)?
>
> If you reply to group AND direct to me I'd be really grateful - I
sometimes
> don't get the chance to check groups as I'm pretty busy.
>
> Thanks in advance.
>
>
>
> --
> Andrew Horton
> andrew.horton@obexchange.com
> +44 (0) 20 7947 2150
>
>

Stefan,

Thanks for replying.

In what window do I select the server and system state?

Selecting it in the Backup Selection window does not give me the "Connect
as" option on right-click or program menu. Nor in the selection window of
the job properties.

Where can I find this "Connect as" option?

Andy

"Stefan" wrote in message news:3dbfba99@hronntp01....
> Hello!
>
> 1.select server
> 2.select system sate
> 3.Connection as: the full name of the backupaccount (domainname\account)
>
> "Andrew Horton" schrieb im Newsbeitrag
> news:3dbf1422@hronntp01....
> > This one is driving me round the bend. I've been working with WIndows
for
> > years and with this problem for a couiple of weeks. But am getting
> > nowhere...
> >
> > I have two servers.
> >
> > 1. Windows 2000 Server SP3 with Backup Exec 8.5 Rev 3571 plus Exchange
> > Agent. This machine is the backup server with tape drive attached
> >
> > 2. Windows 2000 Server SP3 with Exchange 2000 with Backup Exec Agent for
> > Exec (push installed from server 1)
> >
> > Why oh why can I not backup Server 2's System State, but I can backup
the
> > Exchange Information Store on the same server. The error report I am
> getting
> > is:
> > """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> > Unable to attach to \\OBE-S2\System?State.
> > Access is denied.
> >
> > To Backup or Restore System State, Administrator privileges are
required.
> >
> >
> > ^ ^ ^ ^ ^
> > Unable to attach to \\OBE-S2\System?State.
> > ^ ^ ^ ^ ^
> > """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> > I have tried running all the BE services (on both machines) as
ServiceUser
> > (who is a member of Administrators and Domain Admins) and as
> Administrator.
> > But I always get the same message. I have also tried making these users
> > members of all the other Admin groups (Enterprise etc) and checked that
> they
> > have Logo as Service rights and even set their Primary Group as Domain
> Admin
> > (as instructed in article 234562.
> >
> > I DO HAVE ADMINISTRATOR PRIVILEGES! WHAT IS THE PROBLEM !!
> >
> > Any ideas guys (and girls)?
> >
> > If you reply to group AND direct to me I'd be really grateful - I
> sometimes
> > don't get the chance to check groups as I'm pretty busy.
> >
> > Thanks in advance.
> >
> >
> >
> > --
> > Andrew Horton
> > andrew.horton@obexchange.com
> > +44 (0) 20 7947 2150
> >
> >
>
>

Selecting it in the Backup Selection window


"Andrew Horton" schrieb im Newsbeitrag
news:3dbfc40e$1@hronntp01....
> Stefan,
>
> Thanks for replying.
>
> In what window do I select the server and system state?
>
> Selecting it in the Backup Selection window does not give me the "Connect
> as" option on right-click or program menu. Nor in the selection window of
> the job properties.
>
> Where can I find this "Connect as" option?
>
> Andy
>
> "Stefan" wrote in message news:3dbfba99@hronntp01....
> > Hello!
> >
> > 1.select server
> > 2.select system sate
> > 3.Connection as: the full name of the backupaccount (domainname\account)
> >
> > "Andrew Horton" schrieb im Newsbeitrag
> > news:3dbf1422@hronntp01....
> > > This one is driving me round the bend. I've been working with WIndows
> for
> > > years and with this problem for a couiple of weeks. But am getting
> > > nowhere...
> > >
> > > I have two servers.
> > >
> > > 1. Windows 2000 Server SP3 with Backup Exec 8.5 Rev 3571 plus Exchange
> > > Agent. This machine is the backup server with tape drive attached
> > >
> > > 2. Windows 2000 Server SP3 with Exchange 2000 with Backup Exec Agent
for
> > > Exec (push installed from server 1)
> > >
> > > Why oh why can I not backup Server 2's System State, but I can backup
> the
> > > Exchange Information Store on the same server. The error report I am
> > getting
> > > is:
> > > """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> > > Unable to attach to \\OBE-S2\System?State.
> > > Access is denied.
> > >
> > > To Backup or Restore System State, Administrator privileges are
> required.
> > >
> > >
> > > ^ ^ ^ ^ ^
> > > Unable to attach to \\OBE-S2\System?State.
> > > ^ ^ ^ ^ ^
> > > """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> > > I have tried running all the BE services (on both machines) as
> ServiceUser
> > > (who is a member of Administrators and Domain Admins) and as
> > Administrator.
> > > But I always get the same message. I have also tried making these
users
> > > members of all the other Admin groups (Enterprise etc) and checked
that
> > they
> > > have Logo as Service rights and even set their Primary Group as Domain
> > Admin
> > > (as instructed in article 234562.
> > >
> > > I DO HAVE ADMINISTRATOR PRIVILEGES! WHAT IS THE PROBLEM !!
> > >
> > > Any ideas guys (and girls)?
> > >
> > > If you reply to group AND direct to me I'd be really grateful - I
> > sometimes
> > > don't get the chance to check groups as I'm pretty busy.
> > >
> > > Thanks in advance.
> > >
> > >
> > >
> > > --
> > > Andrew Horton
> > > andrew.horton@obexchange.com
> > > +44 (0) 20 7947 2150
> > >
> > >
> >
> >
>
>

Stefan

As I said below, I tried that and right-clicked and checked the program
menus.

There is no Connect As option.

Andy

"Stefan" wrote in message news:3dbfc574@hronntp01....
> Selecting it in the Backup Selection window
>
>
> "Andrew Horton" schrieb im Newsbeitrag
> news:3dbfc40e$1@hronntp01....
> > Stefan,
> >
> > Thanks for replying.
> >
> > In what window do I select the server and system state?
> >
> > Selecting it in the Backup Selection window does not give me the
"Connect
> > as" option on right-click or program menu. Nor in the selection window
of
> > the job properties.
> >
> > Where can I find this "Connect as" option?
> >
> > Andy
> >
> > "Stefan" wrote in message news:3dbfba99@hronntp01....
> > > Hello!
> > >
> > > 1.select server
> > > 2.select system sate
> > > 3.Connection as: the full name of the backupaccount
(domainname\account)
> > >
> > > "Andrew Horton" schrieb im Newsbeitrag
> > > news:3dbf1422@hronntp01....
> > > > This one is driving me round the bend. I've been working with
WIndows
> > for
> > > > years and with this problem for a couiple of weeks. But am getting
> > > > nowhere...
> > > >
> > > > I have two servers.
> > > >
> > > > 1. Windows 2000 Server SP3 with Backup Exec 8.5 Rev 3571 plus
Exchange
> > > > Agent. This machine is the backup server with tape drive attached
> > > >
> > > > 2. Windows 2000 Server SP3 with Exchange 2000 with Backup Exec Agent
> for
> > > > Exec (push installed from server 1)
> > > >
> > > > Why oh why can I not backup Server 2's System State, but I can
backup
> > the
> > > > Exchange Information Store on the same server. The error report I am
> > > getting
> > > > is:
> > > > """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> > > > Unable to attach to \\OBE-S2\System?State.
> > > > Access is denied.
> > > >
> > > > To Backup or Restore System State, Administrator privileges are
> > required.
> > > >
> > > >
> > > > ^ ^ ^ ^ ^
> > > > Unable to attach to \\OBE-S2\System?State.
> > > > ^ ^ ^ ^ ^
> > > > """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> > > > I have tried running all the BE services (on both machines) as
> > ServiceUser
> > > > (who is a member of Administrators and Domain Admins) and as
> > > Administrator.
> > > > But I always get the same message. I have also tried making these
> users
> > > > members of all the other Admin groups (Enterprise etc) and checked
> that
> > > they
> > > > have Logo as Service rights and even set their Primary Group as
Domain
> > > Admin
> > > > (as instructed in article 234562.
> > > >
> > > > I DO HAVE ADMINISTRATOR PRIVILEGES! WHAT IS THE PROBLEM !!
> > > >
> > > > Any ideas guys (and girls)?
> > > >
> > > > If you reply to group AND direct to me I'd be really grateful - I
> > > sometimes
> > > > don't get the chance to check groups as I'm pretty busy.
> > > >
> > > > Thanks in advance.
> > > >
> > > >
> > > >
> > > > --
> > > > Andrew Horton
> > > > andrew.horton@obexchange.com
> > > > +44 (0) 20 7947 2150
> > > >
> > > >
> > >
> > >
> >
> >
>
>

Stefan,

Did find an option called Set Default Attach Info - which I set for the
whole network tree. I set it it to my Administrator's account and password.
This made no difference.

Any other ideas? Anyone?

Andy.




"Stefan" wrote in message news:3dbfc574@hronntp01....
> Selecting it in the Backup Selection window
>
>
> "Andrew Horton" schrieb im Newsbeitrag
> news:3dbfc40e$1@hronntp01....
> > Stefan,
> >
> > Thanks for replying.
> >
> > In what window do I select the server and system state?
> >
> > Selecting it in the Backup Selection window does not give me the
"Connect
> > as" option on right-click or program menu. Nor in the selection window
of
> > the job properties.
> >
> > Where can I find this "Connect as" option?
> >
> > Andy
> >
> > "Stefan" wrote in message news:3dbfba99@hronntp01....
> > > Hello!
> > >
> > > 1.select server
> > > 2.select system sate
> > > 3.Connection as: the full name of the backupaccount
(domainname\account)
> > >
> > > "Andrew Horton" schrieb im Newsbeitrag
> > > news:3dbf1422@hronntp01....
> > > > This one is driving me round the bend. I've been working with
WIndows
> > for
> > > > years and with this problem for a couiple of weeks. But am getting
> > > > nowhere...
> > > >
> > > > I have two servers.
> > > >
> > > > 1. Windows 2000 Server SP3 with Backup Exec 8.5 Rev 3571 plus
Exchange
> > > > Agent. This machine is the backup server with tape drive attached
> > > >
> > > > 2. Windows 2000 Server SP3 with Exchange 2000 with Backup Exec Agent
> for
> > > > Exec (push installed from server 1)
> > > >
> > > > Why oh why can I not backup Server 2's System State, but I can
backup
> > the
> > > > Exchange Information Store on the same server. The error report I am
> > > getting
> > > > is:
> > > > """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> > > > Unable to attach to \\OBE-S2\System?State.
> > > > Access is denied.
> > > >
> > > > To Backup or Restore System State, Administrator privileges are
> > required.
> > > >
> > > >
> > > > ^ ^ ^ ^ ^
> > > > Unable to attach to \\OBE-S2\System?State.
> > > > ^ ^ ^ ^ ^
> > > > """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> > > > I have tried running all the BE services (on both machines) as
> > ServiceUser
> > > > (who is a member of Administrators and Domain Admins) and as
> > > Administrator.
> > > > But I always get the same message. I have also tried making these
> users
> > > > members of all the other Admin groups (Enterprise etc) and checked
> that
> > > they
> > > > have Logo as Service rights and even set their Primary Group as
Domain
> > > Admin
> > > > (as instructed in article 234562.
> > > >
> > > > I DO HAVE ADMINISTRATOR PRIVILEGES! WHAT IS THE PROBLEM !!
> > > >
> > > > Any ideas guys (and girls)?
> > > >
> > > > If you reply to group AND direct to me I'd be really grateful - I
> > > sometimes
> > > > don't get the chance to check groups as I'm pretty busy.
> > > >
> > > > Thanks in advance.
> > > >
> > > >
> > > >
> > > > --
> > > > Andrew Horton
> > > > andrew.horton@obexchange.com
> > > > +44 (0) 20 7947 2150
> > > >
> > > >
> > >
> > >
> >
> >
>
>

In the Backup Selections tab, it's actually "Attach As" rather than Connect
As.

"Andrew Horton" wrote in message
news:3dbfc859@hronntp01....
> Stefan
>
> As I said below, I tried that and right-clicked and checked the program
> menus.
>
> There is no Connect As option.
>
> Andy
>
> "Stefan" wrote in message news:3dbfc574@hronntp01....
> > Selecting it in the Backup Selection window
> >
> >
> > "Andrew Horton" schrieb im Newsbeitrag
> > news:3dbfc40e$1@hronntp01....
> > > Stefan,
> > >
> > > Thanks for replying.
> > >
> > > In what window do I select the server and system state?
> > >
> > > Selecting it in the Backup Selection window does not give me the
> "Connect
> > > as" option on right-click or program menu. Nor in the selection window
> of
> > > the job properties.
> > >
> > > Where can I find this "Connect as" option?
> > >
> > > Andy
> > >
> > > "Stefan" wrote in message news:3dbfba99@hronntp01....
> > > > Hello!
> > > >
> > > > 1.select server
> > > > 2.select system sate
> > > > 3.Connection as: the full name of the backupaccount
> (domainname\account)
> > > >
> > > > "Andrew Horton" schrieb im
Newsbeitrag
> > > > news:3dbf1422@hronntp01....
> > > > > This one is driving me round the bend. I've been working with
> WIndows
> > > for
> > > > > years and with this problem for a couiple of weeks. But am getting
> > > > > nowhere...
> > > > >
> > > > > I have two servers.
> > > > >
> > > > > 1. Windows 2000 Server SP3 with Backup Exec 8.5 Rev 3571 plus
> Exchange
> > > > > Agent. This machine is the backup server with tape drive attached
> > > > >
> > > > > 2. Windows 2000 Server SP3 with Exchange 2000 with Backup Exec
Agent
> > for
> > > > > Exec (push installed from server 1)
> > > > >
> > > > > Why oh why can I not backup Server 2's System State, but I can
> backup
> > > the
> > > > > Exchange Information Store on the same server. The error report I
am
> > > > getting
> > > > > is:
> > > > > """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> > > > > Unable to attach to \\OBE-S2\System?State.
> > > > > Access is denied.
> > > > >
> > > > > To Backup or Restore System State, Administrator privileges are
> > > required.
> > > > >
> > > > >
> > > > > ^ ^ ^ ^ ^
> > > > > Unable to attach to \\OBE-S2\System?State.
> > > > > ^ ^ ^ ^ ^
> > > > > """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> > > > > I have tried running all the BE services (on both machines) as
> > > ServiceUser
> > > > > (who is a member of Administrators and Domain Admins) and as
> > > > Administrator.
> > > > > But I always get the same message. I have also tried making these
> > users
> > > > > members of all the other Admin groups (Enterprise etc) and checked
> > that
> > > > they
> > > > > have Logo as Service rights and even set their Primary Group as
> Domain
> > > > Admin
> > > > > (as instructed in article 234562.
> > > > >
> > > > > I DO HAVE ADMINISTRATOR PRIVILEGES! WHAT IS THE PROBLEM !!
> > > > >
> > > > > Any ideas guys (and girls)?
> > > > >
> > > > > If you reply to group AND direct to me I'd be really grateful - I
> > > > sometimes
> > > > > don't get the chance to check groups as I'm pretty busy.
> > > > >
> > > > > Thanks in advance.
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Andrew Horton
> > > > > andrew.horton@obexchange.com
> > > > > +44 (0) 20 7947 2150
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

Keith,

I know... see my later post.

Attach As is greyed out. Set Default Connect As is not. So I tried setting
this to administrator, and it still didn't work. And previously - when it
all used to work, I didn't have to set anything here.

Any further ideas?

Andy.

"Keith Langmead" wrote in message
news:3dc00283@hronntp01....
> In the Backup Selections tab, it's actually "Attach As" rather than
Connect
> As.
>
> "Andrew Horton" wrote in message
> news:3dbfc859@hronntp01....
> > Stefan
> >
> > As I said below, I tried that and right-clicked and checked the program
> > menus.
> >
> > There is no Connect As option.
> >
> > Andy
> >
> > "Stefan" wrote in message news:3dbfc574@hronntp01....
> > > Selecting it in the Backup Selection window
> > >
> > >
> > > "Andrew Horton" schrieb im Newsbeitrag
> > > news:3dbfc40e$1@hronntp01....
> > > > Stefan,
> > > >
> > > > Thanks for replying.
> > > >
> > > > In what window do I select the server and system state?
> > > >
> > > > Selecting it in the Backup Selection window does not give me the
> > "Connect
> > > > as" option on right-click or program menu. Nor in the selection
window
> > of
> > > > the job properties.
> > > >
> > > > Where can I find this "Connect as" option?
> > > >
> > > > Andy
> > > >
> > > > "Stefan" wrote in message news:3dbfba99@hronntp01....
> > > > > Hello!
> > > > >
> > > > > 1.select server
> > > > > 2.select system sate
> > > > > 3.Connection as: the full name of the backupaccount
> > (domainname\account)
> > > > >
> > > > > "Andrew Horton" schrieb im
> Newsbeitrag
> > > > > news:3dbf1422@hronntp01....
> > > > > > This one is driving me round the bend. I've been working with
> > WIndows
> > > > for
> > > > > > years and with this problem for a couiple of weeks. But am
getting
> > > > > > nowhere...
> > > > > >
> > > > > > I have two servers.
> > > > > >
> > > > > > 1. Windows 2000 Server SP3 with Backup Exec 8.5 Rev 3571 plus
> > Exchange
> > > > > > Agent. This machine is the backup server with tape drive
attached
> > > > > >
> > > > > > 2. Windows 2000 Server SP3 with Exchange 2000 with Backup Exec
> Agent
> > > for
> > > > > > Exec (push installed from server 1)
> > > > > >
> > > > > > Why oh why can I not backup Server 2's System State, but I can
> > backup
> > > > the
> > > > > > Exchange Information Store on the same server. The error report
I
> am
> > > > > getting
> > > > > > is:
> > > > > > """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> > > > > > Unable to attach to \\OBE-S2\System?State.
> > > > > > Access is denied.
> > > > > >
> > > > > > To Backup or Restore System State, Administrator privileges are
> > > > required.
> > > > > >
> > > > > >
> > > > > > ^ ^ ^ ^ ^
> > > > > > Unable to attach to \\OBE-S2\System?State.
> > > > > > ^ ^ ^ ^ ^
> > > > > > """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> > > > > > I have tried running all the BE services (on both machines) as
> > > > ServiceUser
> > > > > > (who is a member of Administrators and Domain Admins) and as
> > > > > Administrator.
> > > > > > But I always get the same message. I have also tried making
these
> > > users
> > > > > > members of all the other Admin groups (Enterprise etc) and
checked
> > > that
> > > > > they
> > > > > > have Logo as Service rights and even set their Primary Group as
> > Domain
> > > > > Admin
> > > > > > (as instructed in article 234562.
> > > > > >
> > > > > > I DO HAVE ADMINISTRATOR PRIVILEGES! WHAT IS THE PROBLEM !!
> > > > > >
> > > > > > Any ideas guys (and girls)?
> > > > > >
> > > > > > If you reply to group AND direct to me I'd be really grateful -
I
> > > > > sometimes
> > > > > > don't get the chance to check groups as I'm pretty busy.
> > > > > >
> > > > > > Thanks in advance.
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Andrew Horton
> > > > > > andrew.horton@obexchange.com
> > > > > > +44 (0) 20 7947 2150
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

I know this is no fix, but sometimes I get that error too, and after a reboot
of the system whose SS I am trying to backup, it goes fine.


"Stefan" wrote:
>Hello!
>
>1.select server
>2.select system sate
>3.Connection as: the full name of the backupaccount (domainname\account)
>
>"Andrew Horton" schrieb im Newsbeitrag
>news:3dbf1422@hronntp01....
>> This one is driving me round the bend. I've been working with WIndows
for
>> years and with this problem for a couiple of weeks. But am getting
>> nowhere...
>>
>> I have two servers.
>>
>> 1. Windows 2000 Server SP3 with Backup Exec 8.5 Rev 3571 plus Exchange
>> Agent. This machine is the backup server with tape drive attached
>>
>> 2. Windows 2000 Server SP3 with Exchange 2000 with Backup Exec Agent for
>> Exec (push installed from server 1)
>>
>> Why oh why can I not backup Server 2's System State, but I can backup
the
>> Exchange Information Store on the same server. The error report I am
>getting
>> is:
>> """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
>> Unable to attach to \\OBE-S2\System?State.
>> Access is denied.
>>
>> To Backup or Restore System State, Administrator privileges are required.
>>
>>
>> ^ ^ ^ ^ ^
>> Unable to attach to \\OBE-S2\System?State.
>> ^ ^ ^ ^ ^
>> """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
>> I have tried running all the BE services (on both machines) as ServiceUser
>> (who is a member of Administrators and Domain Admins) and as
>Administrator.
>> But I always get the same message. I have also tried making these users
>> members of all the other Admin groups (Enterprise etc) and checked that
>they
>> have Logo as Service rights and even set their Primary Group as Domain
>Admin
>> (as instructed in article 234562.
>>
>> I DO HAVE ADMINISTRATOR PRIVILEGES! WHAT IS THE PROBLEM !!
>>
>> Any ideas guys (and girls)?
>>
>> If you reply to group AND direct to me I'd be really grateful - I
>sometimes
>> don't get the chance to check groups as I'm pretty busy.
>>
>> Thanks in advance.
>>
>>
>>
>> --
>> Andrew Horton
>> andrew.horton@obexchange.com
>> +44 (0) 20 7947 2150
>>
>>
>
>

I had the same (or similiar) problem a few weeks ago. I solved it by making
a registry hack. Go to the Support page on Veritas web site and do a search
for the exact error message and you will be directed to the solution.


"Andrew Horton" wrote:
>Stefan,
>
>Did find an option called Set Default Attach Info - which I set for the
>whole network tree. I set it it to my Administrator's account and password.
>This made no difference.
>
>Any other ideas? Anyone?
>
>Andy.
>
>
>
>
>"Stefan" wrote in message news:3dbfc574@hronntp01....
>> Selecting it in the Backup Selection window
>>
>>
>> "Andrew Horton" schrieb im Newsbeitrag
>> news:3dbfc40e$1@hronntp01....
>> > Stefan,
>> >
>> > Thanks for replying.
>> >
>> > In what window do I select the server and system state?
>> >
>> > Selecting it in the Backup Selection window does not give me the
>"Connect
>> > as" option on right-click or program menu. Nor in the selection window
>of
>> > the job properties.
>> >
>> > Where can I find this "Connect as" option?
>> >
>> > Andy
>> >
>> > "Stefan" wrote in message news:3dbfba99@hronntp01....
>> > > Hello!
>> > >
>> > > 1.select server
>> > > 2.select system sate
>> > > 3.Connection as: the full name of the backupaccount
>(domainname\account)
>> > >
>> > > "Andrew Horton" schrieb im Newsbeitrag
>> > > news:3dbf1422@hronntp01....
>> > > > This one is driving me round the bend. I've been working with
>WIndows
>> > for
>> > > > years and with this problem for a couiple of weeks. But am getting
>> > > > nowhere...
>> > > >
>> > > > I have two servers.
>> > > >
>> > > > 1. Windows 2000 Server SP3 with Backup Exec 8.5 Rev 3571 plus
>Exchange
>> > > > Agent. This machine is the backup server with tape drive attached
>> > > >
>> > > > 2. Windows 2000 Server SP3 with Exchange 2000 with Backup Exec Agent
>> for
>> > > > Exec (push installed from server 1)
>> > > >
>> > > > Why oh why can I not backup Server 2's System State, but I can
>backup
>> > the
>> > > > Exchange Information Store on the same server. The error report
I am
>> > > getting
>> > > > is:
>> > > > """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
>> > > > Unable to attach to \\OBE-S2\System?State.
>> > > > Access is denied.
>> > > >
>> > > > To Backup or Restore System State, Administrator privileges are
>> > required.
>> > > >
>> > > >
>> > > > ^ ^ ^ ^ ^
>> > > > Unable to attach to \\OBE-S2\System?State.
>> > > > ^ ^ ^ ^ ^
>> > > > """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
>> > > > I have tried running all the BE services (on both machines) as
>> > ServiceUser
>> > > > (who is a member of Administrators and Domain Admins) and as
>> > > Administrator.
>> > > > But I always get the same message. I have also tried making these
>> users
>> > > > members of all the other Admin groups (Enterprise etc) and checked
>> that
>> > > they
>> > > > have Logo as Service rights and even set their Primary Group as
>Domain
>> > > Admin
>> > > > (as instructed in article 234562.
>> > > >
>> > > > I DO HAVE ADMINISTRATOR PRIVILEGES! WHAT IS THE PROBLEM !!
>> > > >
>> > > > Any ideas guys (and girls)?
>> > > >
>> > > > If you reply to group AND direct to me I'd be really grateful -
I
>> > > sometimes
>> > > > don't get the chance to check groups as I'm pretty busy.
>> > > >
>> > > > Thanks in advance.
>> > > >
>> > > >
>> > > >
>> > > > --
>> > > > Andrew Horton
>> > > > andrew.horton@obexchange.com
>> > > > +44 (0) 20 7947 2150
>> > > >
>> > > >
>> > >
>> > >
>> >
>> >
>>
>>
>
>