Hi,

we had a power failure and then a crash of our Netware Server 6.5 SP6.

After the reboot of the server, BE aborts with the error message:
"error 1050 - unknown device driver init error".
I've changed nothing in the startup.ncf

Normally we saved on HP ULTRIUM tape.

The output of "list storage adapters" and
"list devices" is like this:
__________________________________________________ ___________
PLATON:list storage adapters
0x00 [V024-A0] Legacy FLOPPY Controller [slot 0]
0x01 [V024-A0-D1:0] Legacy Floppy
0x02 [V100-A100] USB OHCI Controller [slot 0]
0x03 [V504-A1] HP Unified RAID Driver [slot 1]
0x08 [V504-A1-D0:0] HP Smart Array 641 Slot 1 ID 0 LUN 0
0x04 [V323-A2] Adaptec SCSI Card 29320ALP - Ultra320 SCSI [slot 4]
0x26 [V323-A2-D6:0] SONY TSL-11000 L0u6
0x25 [V323-A2-D3:0] HP ULTRIUM 3-SCSI G54D
0x05 [V321-A3] Compaq 64-Bit/66MHz Dual Ultra3 SCSI [slot 10004]
0x06 [V321-A4] Compaq 64-Bit/66MHz Dual Ultra3 SCSI [slot 10005]
0x07 [V025-A5] Novell IDE/ATA/ATAPI/SATA Host Adapter Module [slot 0]
0x24 [V025-A5-D0:0] COMPAQ CD-ROM LTN486S f/w:YQSK
PLATON:
PLATON:list devices
0x0001: [V024-A0-D1:0] Legacy Floppy [FLOPPY]
0x0008: [V504-A1-D0:0] HP Smart Array 641 Slot 1 ID 0 LUN 0 [HDD]
0x0024: [V025-A5-D0:0] COMPAQ CD-ROM LTN486S f/w:YQSK [CD]
0x0025: [V323-A2-D3:0] HP ULTRIUM 3-SCSI G54D [TAPE]
0x0026: [V323-A2-D6:0] SONY TSL-11000 L0u6 [TAPE]
__________________________________________________ ___________

The content of startup.ncf is like this:
SET CLIENT FILE CACHING ENABLED = OFF
LOAD ACPIDRV.PSM
######## End PSM Drivers ########
LOAD CPQSHD.CDM
LOAD IDECD.CDM
######## End CDM Drivers ########
LOAD CPQRAID.HAM SLOT=1
LOAD ADPU320.HAM SLOT=4 /LUN
LOAD ADPT160M.HAM SLOT=10004
LOAD ADPT160M.HAM SLOT=10005
LOAD IDEATA.HAM SLOT=10010
######## End HAM Drivers ########
Load Keyb Germany
__________________________________________________ ___________


I reinstalled Veritas Backup Exec Version 9.1.1158.9 but
no success. The start fails again.

Any ideas to solve my problem?

Thanks
Bernhard