Overland LoaderXpress upgraded cause of failure.

I was wondering if anyone got any tip for me.
I just had my library repaired. It is a LoaderXpress from overland storage.
The drive is a HP ULTRIUM 2-SCSI. Anyway the problem is backup exec no longer
recognize the loader. The drive shows up just fine but the robot does not.
this is the output of list storage adapters.

list storage adapters
0x00 [V024-A0] Legacy FLOPPY Controller [slot 0]
0x01 [V024-A0-D1:0] Legacy Floppy
0x03 [V100-A100] USB OHCI Controller [slot 0]
0x04 [V321-A1] Adaptec SCSI Card 29160 - Ultra160 SCSI [slot 3]
0x0A [V321-A1-D6:0] OVERLANDLXB 0107
0x09 [V321-A1-D4:0] HP ULTRIUM 2-SCSI S22H
0x05 [V025-A2] Novell ATA/IDE Host Adapter Module [slot 0]
0x08 [V025-A2-D0:1] ASUS CD-S520/A f/w:2.0K
0x06 [V0BB-A3] ADAPTEC AIC-7899 0000 [slot 0]
0x07 [V0BB-A4] ADAPTEC 2110S [slot 0]
0x0B [V0BB-A4-D2:B] [I:2] ADAPTEC RAID-5 rev:380E (280028 MB)

This is output from BEDIAG.nlm /S /C

Gathering SCSI information...
CMD Host = BECDM.CDM
Number of Host Adapters = 2

Host Adapter 0 ADPT160M.HAM Adaptec SCSI Car
SCSI ID = 4 Lun = 0 HP Ultrium 2-SCSI (S22H), *
SCSI ID = 6 Lun = 0 OVERLAND LXB (0107), *

Host Adapter 1 Vetitas VirtHBA Vetitas VirtMGR

Any tips would be great

Kind regards Johnny

Johnny Westerlund wrote:
[color=blue]
>
> I was wondering if anyone got any tip for me.
> I just had my library repaired. It is a LoaderXpress from overland
> storage. The drive is a HP ULTRIUM 2-SCSI. Anyway the problem is
> backup exec no longer recognize the loader. The drive shows up just
> fine but the robot does not. this is the output of list storage
> adapters.
>
> list storage adapters
> 0x00 [V024-A0] Legacy FLOPPY Controller [slot 0]
> 0x01 [V024-A0-D1:0] Legacy Floppy
> 0x03 [V100-A100] USB OHCI Controller [slot 0]
> 0x04 [V321-A1] Adaptec SCSI Card 29160 - Ultra160 SCSI [slot 3]
> 0x0A [V321-A1-D6:0] OVERLANDLXB 0107
> 0x09 [V321-A1-D4:0] HP ULTRIUM 2-SCSI S22H
> 0x05 [V025-A2] Novell ATA/IDE Host Adapter Module [slot 0]
> 0x08 [V025-A2-D0:1] ASUS CD-S520/A f/w:2.0K
> 0x06 [V0BB-A3] ADAPTEC AIC-7899 0000 [slot 0]
> 0x07 [V0BB-A4] ADAPTEC 2110S [slot 0]
> 0x0B [V0BB-A4-D2:B] [I:2] ADAPTEC RAID-5 rev:380E (280028 MB)
>
> This is output from BEDIAG.nlm /S /C
>
> Gathering SCSI information...
> CMD Host = BECDM.CDM
> Number of Host Adapters = 2
>
> Host Adapter 0 ADPT160M.HAM Adaptec SCSI Car
> SCSI ID = 4 Lun = 0 HP Ultrium 2-SCSI (S22H), *
> SCSI ID = 6 Lun = 0 OVERLAND LXB (0107), *
>
> Host Adapter 1 Vetitas VirtHBA Vetitas VirtMGR
>
> Any tips would be great
>
> Kind regards Johnny[/color]

So everything was working before the library was repaired? Which model
of the LoaderXpress are you using? Also, what version/build of Backup
Exec do you have (check in <vol>:\bkupexec\version.doc)?

You might want to try the following:

1. BESTOP
2. Rename <vol>:\bkupexec\mm to mm.old
3. BESTART

Chris

I allready installed the latest 9.2 release.
Tried renaming the sys:\BKUPEXEC\MM and restarting backupexec.

Backup Exec for NetWare 9.2 Build 1401.3

Media Server = 1401.3
Ndmp Server = 1401.3
Nlm Client = 1401.3
Java Client = 1401.3
Drivers = 0011N023

Windows 9X agent = 5.030
MAC OS X agent = 5.045
UNIX agent = 5.046

OFO NW option = 9.5.501
RAWS/OFO NT option = 5629R

Another thing you could try...change the SCSI ID for the robot to 3 (so
that it is lower than the ID for the drive).

Hope that helps.

Chris