BackupExec: 8.5
OS: NetWare 5.1 SP8
Tape Drive: Dell PowerVault 100T
SCSI Card: Adaptec 39160
Server: Dell PowerEdge 4300

Error: Device driver load was unsuccessful

Cable is terminated
Setting on Tape drive is Termination Power On
Setting on Termination Power is On
SCSI ID 6

Loading ADPT160M.HMA and NWASPI.CDM and have updated files from CD which
came with SCSI Card

I have tried turning off Domain Validation in the SCSI Select with no success

BIOS recognized the Tape Drive

NetWare recognizes the SCSI card

Output of LOAD BEDIAG -s -c is:
Host Adapter 0 PEDGE3.HAM
SCSI ID = 0 Lun = 0 PERC LD01 RAID 5
Host Adapter 1 ADPT160M.HAM ADP Ultra160"
Host Adapter 2 AIC78U2.HAM ADAPTEC AIC-78U2

Output of LIST STORAGE ADAPTERS is:
0x00 [V370-A0] PERC HOST ADAPTER MODULE
0x01 [V370-A0-D0:0] PERC LD01 RAID5
0x02 [V321-A1] Adaptec SCSI Card 39160/3960D – Ultra160 SCS [Slot 202]
0x08 [V319-A2] Adaptec AIC-7890/7891 – Ultra2 SCSI [Slot 10008

No tape drive is listed.

Any suggestions?