PE 2600 Server Abending after upgrade to NW6SP5 - Veritas Backup Exec

This is a discussion on PE 2600 Server Abending after upgrade to NW6SP5 - Veritas Backup Exec ; I recently upgraded to NW6SP5. I have a PE2600, 1.1gig of Ram, dual Zeons, PERC 4/DI RAID and Vertias Backup Exec 9.0. I am on verison A12 of the Dell BIOS. My server appears to be abending sometime in the ...

+ Reply to Thread
Results 1 to 4 of 4

Thread: PE 2600 Server Abending after upgrade to NW6SP5

  1. PE 2600 Server Abending after upgrade to NW6SP5


    I recently upgraded to NW6SP5. I have a PE2600, 1.1gig of Ram, dual Zeons,
    PERC 4/DI RAID and Vertias Backup Exec 9.0. I am on verison A12 of the Dell
    BIOS.

    My server appears to be abending sometime in the middle of the night, possible
    kicked off by the night backup at 1am.

    This is what the server monitor had on this morning. (see below)

    Help!
    Adam

    =======================================


    Novell NetWare Debugger
    Break Because Debug procedure was called
    current focus processor: P01#
    EAX=00000000 EBX=00000001 ECX=C8003F44 EDX=00000002 ESI=C8958F54
    EDI=00000000 EBO=390A0BE0 ESP=8958F1C EIP=C8A01994 FLAGS=00000002
    C87EAAF8SF POP EDI

  2. Re: PE 2600 Server Abending after upgrade to NW6SP5

    make sure that you on the latest verson V4202 and include this patch.
    you can find this info out in the Administration Console, under About
    and selecting Administration Console

    http://seer.support.veritas.com/docs/274645.htm
    If you check your abend log and find that it was the NRLTLI.NLM causing
    the problem the above patch will fix you right up.

    Adam Billing wrote:
    > I recently upgraded to NW6SP5. I have a PE2600, 1.1gig of Ram, dual Zeons,
    > PERC 4/DI RAID and Vertias Backup Exec 9.0. I am on verison A12 of the Dell
    > BIOS.
    >
    > My server appears to be abending sometime in the middle of the night, possible
    > kicked off by the night backup at 1am.
    >
    > This is what the server monitor had on this morning. (see below)
    >
    > Help!
    > Adam
    >
    > =======================================
    >
    >
    > Novell NetWare Debugger
    > Break Because Debug procedure was called
    > current focus processor: P01#
    > EAX=00000000 EBX=00000001 ECX=C8003F44 EDX=00000002 ESI=C8958F54
    > EDI=00000000 EBO=390A0BE0 ESP=8958F1C EIP=C8A01994 FLAGS=00000002
    > C87EAAF8SF POP EDI


  3. Re: PE 2600 Server Abending after upgrade to NW6SP5


    I am on the latest version 4202.

    -Adam

    Andrew Mallette wrote:
    >make sure that you on the latest verson V4202 and include this patch.
    >you can find this info out in the Administration Console, under About
    >and selecting Administration Console
    >
    >http://seer.support.veritas.com/docs/274645.htm
    >If you check your abend log and find that it was the NRLTLI.NLM causing


    >the problem the above patch will fix you right up.
    >
    >Adam Billing wrote:
    >> I recently upgraded to NW6SP5. I have a PE2600, 1.1gig of Ram, dual Zeons,
    >> PERC 4/DI RAID and Vertias Backup Exec 9.0. I am on verison A12 of the

    Dell
    >> BIOS.
    >>
    >> My server appears to be abending sometime in the middle of the night,

    possible
    >> kicked off by the night backup at 1am.
    >>
    >> This is what the server monitor had on this morning. (see below)
    >>
    >> Help!
    >> Adam
    >>
    >> =======================================
    >>
    >>
    >> Novell NetWare Debugger
    >> Break Because Debug procedure was called
    >> current focus processor: P01#
    >> EAX=00000000 EBX=00000001 ECX=C8003F44 EDX=00000002 ESI=C8958F54
    >> EDI=00000000 EBO=390A0BE0 ESP=8958F1C EIP=C8A01994 FLAGS=00000002
    >> C87EAAF8SF POP EDI



  4. Re: PE 2600 Server Abending after upgrade to NW6SP5


    I just put those updated files on; hope this works.

    Thanks Andrew
    Adam

    "Adam Billing" wrote:
    >
    >I am on the latest version 4202.
    >
    >-Adam
    >
    >Andrew Mallette wrote:
    >>make sure that you on the latest verson V4202 and include this patch.
    >>you can find this info out in the Administration Console, under About
    >>and selecting Administration Console
    >>
    >>http://seer.support.veritas.com/docs/274645.htm
    >>If you check your abend log and find that it was the NRLTLI.NLM causing

    >
    >>the problem the above patch will fix you right up.
    >>
    >>Adam Billing wrote:
    >>> I recently upgraded to NW6SP5. I have a PE2600, 1.1gig of Ram, dual

    Zeons,
    >>> PERC 4/DI RAID and Vertias Backup Exec 9.0. I am on verison A12 of the

    >Dell
    >>> BIOS.
    >>>
    >>> My server appears to be abending sometime in the middle of the night,

    >possible
    >>> kicked off by the night backup at 1am.
    >>>
    >>> This is what the server monitor had on this morning. (see below)
    >>>
    >>> Help!
    >>> Adam
    >>>
    >>> =======================================
    >>>
    >>>
    >>> Novell NetWare Debugger
    >>> Break Because Debug procedure was called
    >>> current focus processor: P01#
    >>> EAX=00000000 EBX=00000001 ECX=C8003F44 EDX=00000002 ESI=C8958F54
    >>> EDI=00000000 EBO=390A0BE0 ESP=8958F1C EIP=C8A01994 FLAGS=00000002
    >>> C87EAAF8SF POP EDI

    >



+ Reply to Thread