I Use a proliant ML330G2 (PIII 1133Mhz with 384Mo) to backup a file
server (a proliant ML530 PIII Xeon 800Mhz with 1Go).
The drive is a DLT8000
the network between the servers is a gigabyte ethernet.
I use Netware 4.11 sp8a and BE 8.5 build 194.1
I use the ncf parameters like in the "performance_235036.pdf "

the backup troughput is only 270Mo/Mn and the verify troughput is
350Mo/Mn
In theory a DLT8000 car backup 720Mo/Mn.

this bad performence, is it because of Backup Exec or the TSA/SMS agent.

Y have see that the netware agent can compress data before sending them
through the network.
How to configure it for sending data without compression (because I use
a fast network)?

Can you find any informations in my beremote.log or some suggestion for
the optimizations?

BEREMOTE.CFG

[-1] Created handle tables for 1 session(s)

[-1] Thread NET_SPX_3BB0C0F0 listening for connection requests
[-1] SPXListen: allocated T_CALL=3bb0cf10
[-1] SPXListen: t_listen( 9 )
[-1] >>> TCPThread listening on IP Address: 172.16.10.37
[-1] Thread NET_TCP_3BB0C0F0 listening for connection requests
[-1] TCPListen: allocated T_CALL=3bb0cfb0
[-1] TCPListen: t_listen( 11 )
[-1] Thread NET_IPX_3BB0C0F0 is ready for pre-connect requests
[-1] IPXListen: Received IP Address: 172.16.10.42
[-1] IPXListen: Sending IP Address: 172.16.10.37
[-1] Thread NET_IPX_3BB0C0F0 is ready for pre-connect requests
[-1] accept_call: t_open(/dev/tcp)
[-1] TCPListen: allocated T_CALL=3b866d30
[-1] TCPListen: t_listen( 11 )
[0] Worker thread RB_Wrk_3BB0C020 is running
[0] Manager speaks my language
[0] Attempting to set number of buffers to 20
[0] Number of data buffers set to 20
[0] PADataBufSize is 68
[0] PANumDataBufs is 20
[0] ModifiedOnly is 0
[0] SWCompMode is 0
[0] PreScanDLE is 0
[0] Buff hiwater is 75%
[0] Byte hiwater is 10%
[0] Byte lowater is 50%
[0] Job Start - Mon Jun 3 15:52:57 2002

[0] BESS-Open File Option not selected.
[0] CBUF_Allocate: 20 buffers, size 68 Kbytes, total used: 1392640
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] OpenObj(FS_ERR_BASE + 17)
[0] Job Stop - Mon Jun 3 15:55:05 2002

[0] *** Return code from NETReceive was 00000000
[0] t_getstate()=5
[0] t_snddis() with
[0] Worker thread RB_Wrk_3BB0C020 is terminating
[-1] SIGTERM signal received. Shutting down

[-1] SPXListen: t_listen() failed, t_errno=4
[-1] SPXListen: Thread NET_SPX_3BB0C0F0 is going away
[-1] TCPListen: t_listen() failed, t_errno=4
[-1] TCPListen: Thread NET_TCP_3BB0C0F0 is going away
[-1] IPXListen: t_rcvudata failed, t_errno=0x11
[-1] IPXListen: Thread NET_IPX_3BB0C0F0 is going away