Printable View
I have been backing up with no problems for a while until recently every
night I am receiving an error on the verify. It gives me the error
Translation Error on Tape...
The knowledgebase says to look at the BESRVR.cfg and make sure the
Use_fast_file_access=0 and it is. I have the latest version of Backup
Exec running on Netware 5.1 SP2. The tape drive is an HP Ultrium 215.
Any help is much appreciated.
Chris
Chris Meisinger <cmeisinger@dascon.com> wrote:[color=blue]
>I have been backing up with no problems for a while until recently every
>night I am receiving an error on the verify. It gives me the error
>Translation Error on Tape...
>
>The knowledgebase says to look at the BESRVR.cfg and make sure the
>Use_fast_file_access=0 and it is. I have the latest version of Backup
>Exec running on Netware 5.1 SP2. The tape drive is an HP Ultrium 215.
>
>Any help is much appreciated.
>
>Chris
>
>[/color]
Slow down your scsi card. check the speed rating for teh drive and match
it on teh controller.
Hi Chris,
I had the same error, I'm also using Netware 5.1 SP2a and an Ultrium drive,
every time I did a verify it gave a translation error it stoped at an NDS
Group Object, I removed the Group Object and made a new one (same name same
settings) and now everything works oke !
(before this I tried to repair the NDS ut DSREPAIR couldn't find any errors
so I just recreated the object)
Regards
Ron Vink
Chris Meisinger <cmeisinger@dascon.com> wrote:[color=blue]
>I have been backing up with no problems for a while until recently every
>night I am receiving an error on the verify. It gives me the error
>Translation Error on Tape...
>
>The knowledgebase says to look at the BESRVR.cfg and make sure the
>Use_fast_file_access=0 and it is. I have the latest version of Backup
>Exec running on Netware 5.1 SP2. The tape drive is an HP Ultrium 215.
>
>Any help is much appreciated.
>
>Chris
>
>[/color]