PCI express card problem - Unix

This is a discussion on PCI express card problem - Unix ; Hi, i have a problem which is about PCI express card. i added 2 PCI Express card in the PCI Expension Riser of system. At the bottom you see that i can see clearly cards via prtdiag but i can ...

+ Reply to Thread
Results 1 to 3 of 3

Thread: PCI express card problem

  1. PCI express card problem

    Hi,
    i have a problem which is about PCI express card. i added 2 PCI
    Express card in the PCI Expension Riser of system. At the bottom you
    see that
    i can see clearly cards via prtdiag but i can not see from cfgadm
    command, i tried devfsadm, reboot -- -r many times.

    do yu have any idea about what is the solution?
    Regards
    Ali ELMALI


    root@sincap # uname -a
    SunOS kuntakinte 5.9 Generic_118558-36 sun4u sparc SUNW,Sun-Fire-V245


    and prtdiag output
    Bus Freq Slot + Name +
    Type MHz Status Path Model
    ------ ---- ---------- ----------------------------
    --------------------
    pci 188 MB pci10b9,5237.10b9.5237
    (usb)
    okay /pci@1e,600000/pci@0/pci@1/pci@0/usb@1c


    pci 188 MB pci10b9,5237.10b9.5237
    (usb)
    okay /pci@1e,600000/pci@0/pci@1/pci@0/usb@1c,1


    pci 188 MB pciclass,0c0320
    (usb)
    okay /pci@1e,600000/pci@0/pci@1/pci@0/usb@1c,3


    pci 188 MB pci10b9,5229
    (ide)
    okay /pci@1e,600000/pci@0/pci@1/pci@0/ide@1f


    pci 188 MB pci14e4,1668
    (network)
    okay /pci@1e,600000/pci@0/pci@9/pci@0/network@4


    pci 188 MB pci14e4,1668
    (network)
    okay /pci@1e,600000/pci@0/pci@9/pci@0/
    network@4,1


    pci 188 MB pci14e4,1668
    (network)
    okay /pci@1e,600000/pci@0/pci@a/pci@0/network@4


    pci 188 MB pci14e4,1668
    (network)
    okay /pci@1e,600000/pci@0/pci@a/pci@0/
    network@4,1


    pci 188 MB scsi-pci1000,50 (scsi-2) LSI,
    1064
    okay /pci@1e,600000/pci@0/pci@a/pci@0/pci@8/
    scsi@1


    pci 188 +ISER-LEFT/PCI3 SUNW,qlc-pci1077,2422 (scsi-+
    QLA2460
    okay /pci@1f,700000/pci@0/SUNW,qlc@2


    pci 188 +ISER-LEFT/PCI1 pci100b,35 (network)
    SUNW,pci-
    x-qge
    okay /pci@1f,700000/pci@0,2/pci@1/network@0


    pci 188 +ISER-LEFT/PCI1 pci100b,35 (network)
    SUNW,pci-
    x-qge
    okay /pci@1f,700000/pci@0,2/pci@1/network@1


    pci 188 +ISER-LEFT/PCI1 pci100b,35 (network)
    SUNW,pci-
    x-qge
    okay /pci@1f,700000/pci@0,2/pci@1/network@2


    pci 188 +ISER-LEFT/PCI1 pci100b,35 (network)
    SUNW,pci-
    x-qge
    okay /pci@1f,700000/pci@0,2/pci@1/network@3


    pciex 188 +SER-RIGHT/PCI2 SUNW,qlc (scsi-fcp)
    QLE2460
    okay /pci@1e,600000/pci@0/pci@2/SUNW,qlc


    pciex 188 +SER-RIGHT/PCI0 SUNW,qlc (scsi-fcp)
    QLE2460
    okay /pci@1e,600000/pci@0/pci@8/SUNW,qlc


    and cfgadm result..
    cfgadm -al
    Ap_Id Type Receptacle Occupant
    Condition
    c0 scsi-bus connected configured
    unknown
    c0::dsk/c0t0d0 CD-ROM connected configured
    unknown
    c1 scsi-bus connected configured
    unknown
    c1::dsk/c1t0d0 disk connected configured
    unknown
    c1::dsk/c1t1d0 disk connected configured
    unknown
    c2 fc connected unconfigured
    unknown


  2. Re: PCI express card problem

    "alielmal...@gmail.com" wrote:
    >
    > i have a problem which is about PCI express card. i added 2 PCI
    > Express card in the PCI Expension Riser of system. At the bottom you
    > see that
    > i can see clearly cards via prtdiag but i can not see from cfgadm
    > command, i tried devfsadm, reboot -- -r many times.
    >
    > do yu have any idea about what is the solution?
    > Regards


    What disks are zoned to those fiber connections?

    > c0 scsi-bus connected configured
    > c1 scsi-bus connected configured
    > c2 fc connected unconfigured


    The "unconfigured" part stands out as well. Does it need a
    driver updated ...


  3. Re: PCI express card problem

    Hi
    i have no idea what should i do to solve problem, i found patch for
    PCI-X and PCI Express but its FCODE version less than System FCODE
    version number, i have trouble, so i could not achieve any update? did
    you ever have similar problem like that? i have no idea disk zones
    there is no zones at that time, my duty is that the system must see
    installed PCI express and PCI-X card on the V245 sun system via
    cfgadm command and zoning will be done later? but even i saw all the
    cards by prtdiag i could not see them by cfgadm command. What can i
    do? my customer will hang me as soon as possible i think)
    Thank you very much your answer
    Best Regards
    Ali Elmal─▒.
    >
    > What disks are zoned to those fiber connections?
    >
    > > c0 ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* scsi-bus ┬* ┬* connected ┬* ┬*configured
    > > c1 ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* scsi-bus ┬* ┬* connected ┬* ┬*configured
    > > c2 ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* ┬* fc ┬* ┬* ┬* ┬* ┬* connected ┬* ┬*unconfigured

    >
    > The "unconfigured" part stands out as well. ┬*Does it need a
    > driver updated ...




+ Reply to Thread