can I add an adaptec SCSI controller card to a running
SCO 5.0.5 ide system after its loaded? Have always had one installed before
loading so not sure
Thanks,
Kurt
Printable View
can I add an adaptec SCSI controller card to a running
SCO 5.0.5 ide system after its loaded? Have always had one installed before
loading so not sure
Thanks,
Kurt
mds wrote:
[color=blue]
> can I add an adaptec SCSI controller card to a running
> SCO 5.0.5 ide system after its loaded? Have always had one installed before
> loading so not sure
> Thanks,
> Kurt
>
>[/color]
Make and test emergency boot diskettes then do two verified full backups
(using Edge ([url]www.microlite.com[/url]) or Lone-Tar ([url]www.lone-tar[/url]) ), then use
this 'hidden' option while logged in as root:
mkdev .scsi
(note the period preceding the scsi)
Be real sure of the answers you give the utility - you can really muck
up the OS with wrong answers.
I assume you want to add a SCSI tape drive? Then do mkdev tape after
rebooting from the mkdev .scsi.
If you are adding a SCSI disk, then there are other
problems/considerations to deal with.
The main one being it's a PITA to boot from a SCSI disk in a system with
any IDE drives, unless your BIOS specifically supports selecting SCSI as
the primary boot device.
--
----------------------------------------------------
Pat Welch, UBB Computer Services, a WCS Affiliate
SCO Authorized Partner
Unix/Linux/Windows/Hardware Sales/Support
(209) 745-1401 Cell: (209) 251-9120
E-mail: [email]patubb@inreach.com[/email]
----------------------------------------------------