Acronis TI Home 11 - image corruption ?This is a discussion on Acronis TI Home 11 - image corruption ? within the Storage forums, part of the Systems category; Hi had a few pc issues recently so went for a full format of the c: partition and full load from scratch then after about 6 backups later - so ... | ||||||||
| ||||||||
| Unix Content | Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
#1
08-25-2008, 08:27 AM
|
 Acronis TI Home 11 - image corruption ? Hi had a few pc issues recently so went for a full format of the c: partition and full load from scratch then after about 6 backups later - so pc fully loaded acronis failed to start up - didnt think anything of it was ok after had a printer install hang - so had a forced reboot so decided to go backto the image before the printer to be extra clean acronis said image corrupt - oh dear . . . anyway - if i boot up from the acronis boot cd - all images verify so i reinstalled back to the one it wouldnt do before pc back to normal but every time i do a checkdisk it always finds a few minor errors i know in it self they are nothing - e.g. unused indexes etc. but its every time it leaves me with an uneasy feeling - wondering if its HD or maybe the sata cable ? any ideas welcome thanks  |
|
#2
08-25-2008, 08:42 AM
|
| Re: Acronis TI Home 11 - image corruption ? june wrote: > Hi > > had a few pc issues recently > > so went for a full format of the c: partition > and full load from scratch > > then after about 6 backups later - so pc fully loaded > > acronis failed to start up - didnt think anything of it > > was ok after > > had a printer install hang - so had a forced reboot > > so decided to go backto the image before the printer to be extra clean > > acronis said image corrupt - oh dear . . . > > anyway - if i boot up from the acronis boot cd - all images verify > so i reinstalled back to the one it wouldnt do before > > pc back to normal > > but every time i do a checkdisk it always finds a few minor errors > > i know in it self they are nothing - e.g. unused indexes etc. > > but its every time > > it leaves me with an uneasy feeling - wondering if its HD or maybe the > sata cable ? > > > any ideas welcome > > thanks > from speedfan smart readings Attribute Current Raw Overall Raw Read Error Rate 100 0 Normal 3Spin Up Time 77 7640 Normal Start/Stop Count 100 217 Very good Reallocated Sector Count100 0 Very good Seek Error Rate 253 0 Very good Seek Time Performance 100 0 Very good Power On Hours Count 100 556 Very good Spin Retry Count 100 0 Very good Calibration Retry Count 100 0 Very good Power Cycle Count 100 214 Very good Read Soft Error Rate 100 0 Normal Unknown attribute 183 100 0 Very good Unknown attribute 184 100 0 Very good Unknown attribute 187 100 0 Very good Unknown attribute 188 100 0 Very good Airflow Temperature 74 437321754 Good Hardware ECC Recovered 100 166714 Very good Reallocated Event Count 100 0 Very good Current Pending Sector 100 0 Very good Offline Uncorrectable Sector Count 100 0 Very good Ultra DMA CRC Error Rate 100 0 Normal Write Error Rate 100 0 Normal Soft Read Error Rate 253 0 Very good |
|
#3
08-25-2008, 03:15 PM
|
| Re: Acronis TI Home 11 - image corruption ? june > june wrote: >> Hi >> >> had a few pc issues recently >> >> so went for a full format of the c: partition >> and full load from scratch >> >> then after about 6 backups later - so pc fully loaded >> >> acronis failed to start up - didnt think anything of it >> >> was ok after >> >> had a printer install hang - so had a forced reboot >> >> so decided to go backto the image before the printer to be extra >> clean acronis said image corrupt - oh dear . . . >> >> anyway - if i boot up from the acronis boot cd - all images verify >> so i reinstalled back to the one it wouldnt do before >> >> pc back to normal >> >> but every time i do a checkdisk it always finds a few minor errors >> >> i know in it self they are nothing - e.g. unused indexes etc. >> >> but its every time >> >> it leaves me with an uneasy feeling - wondering if its HD or maybe >> the sata cable ? >> >> >> any ideas welcome >> >> thanks >> > > > from speedfan smart readings > > Attribute Current Raw Overall > Raw Read Error Rate 100 0 Normal > 3Spin Up Time 77 7640 Normal > Start/Stop Count 100 217 Very good > Reallocated Sector Count100 0 Very good > Seek Error Rate 253 0 Very good > Seek Time Performance 100 0 Very good > Power On Hours Count 100 556 Very good > Spin Retry Count 100 0 Very good > Calibration Retry Count 100 0 Very good > Power Cycle Count 100 214 Very good > Read Soft Error Rate 100 0 Normal > Unknown attribute 183 100 0 Very good > Unknown attribute 184 100 0 Very good > Unknown attribute 187 100 0 Very good > Unknown attribute 188 100 0 Very good > Airflow Temperature 74 437321754 Good > Hardware ECC Recovered 100 166714 Very good > Reallocated Event Count 100 0 Very good > Current Pending Sector 100 0 Very good > Offline Uncorrectable Sector Count 100 0 Very good > Ultra DMA CRC Error Rate 100 0 Normal > Write Error Rate 100 0 Normal > Soft Read Error Rate 253 0 Very good The hard drive looks fine. Is there anything useful in the system logs ? You dont say what OS you are using. |
|
#4
08-25-2008, 05:54 PM
|
| Re: Acronis TI Home 11 - image corruption ? Rod Speed wrote: > june >> june wrote: >>> Hi >>> >>> had a few pc issues recently >>> >>> so went for a full format of the c: partition >>> and full load from scratch >>> >>> then after about 6 backups later - so pc fully loaded >>> >>> acronis failed to start up - didnt think anything of it >>> >>> was ok after >>> >>> had a printer install hang - so had a forced reboot >>> >>> so decided to go backto the image before the printer to be extra >>> clean acronis said image corrupt - oh dear . . . >>> >>> anyway - if i boot up from the acronis boot cd - all images verify >>> so i reinstalled back to the one it wouldnt do before >>> >>> pc back to normal >>> >>> but every time i do a checkdisk it always finds a few minor errors >>> >>> i know in it self they are nothing - e.g. unused indexes etc. >>> >>> but its every time >>> >>> it leaves me with an uneasy feeling - wondering if its HD or maybe >>> the sata cable ? >>> >>> >>> any ideas welcome >>> >>> thanks >>> >> >> from speedfan smart readings >> >> Attribute Current Raw Overall >> Raw Read Error Rate 100 0 Normal >> 3Spin Up Time 77 7640 Normal >> Start/Stop Count 100 217 Very good >> Reallocated Sector Count100 0 Very good >> Seek Error Rate 253 0 Very good >> Seek Time Performance 100 0 Very good >> Power On Hours Count 100 556 Very good >> Spin Retry Count 100 0 Very good >> Calibration Retry Count 100 0 Very good >> Power Cycle Count 100 214 Very good >> Read Soft Error Rate 100 0 Normal >> Unknown attribute 183 100 0 Very good >> Unknown attribute 184 100 0 Very good >> Unknown attribute 187 100 0 Very good >> Unknown attribute 188 100 0 Very good >> Airflow Temperature 74 437321754 Good >> Hardware ECC Recovered 100 166714 Very good >> Reallocated Event Count 100 0 Very good >> Current Pending Sector 100 0 Very good >> Offline Uncorrectable Sector Count 100 0 Very good >> Ultra DMA CRC Error Rate 100 0 Normal >> Write Error Rate 100 0 Normal >> Soft Read Error Rate 253 0 Very good > > The hard drive looks fine. > > Is there anything useful in the system logs ? > > You dont say what OS you are using. > > hi xp pro sp3 error code ========== 32 (0x70020) date time The archive is corrupted: None 502 (0x101F6) date time Operation with partition "0-0" was terminated details image corruption (0x70020) tag = 0xF5F8CBCF76155638 not checked disk for a day  - so might do tomorrowthe big tag show sup on google but in foreign http://www.google.co.uk/search?q=0xF...s=sn4&filter=0 |
|
#5
08-25-2008, 05:55 PM
|
| Re: Acronis TI Home 11 - image corruption ? june wrote: > Rod Speed wrote: >> june >>> june wrote: >>>> Hi >>>> >>>> had a few pc issues recently >>>> >>>> so went for a full format of the c: partition >>>> and full load from scratch >>>> >>>> then after about 6 backups later - so pc fully loaded >>>> >>>> acronis failed to start up - didnt think anything of it >>>> >>>> was ok after >>>> >>>> had a printer install hang - so had a forced reboot >>>> >>>> so decided to go backto the image before the printer to be extra >>>> clean acronis said image corrupt - oh dear . . . >>>> >>>> anyway - if i boot up from the acronis boot cd - all images verify >>>> so i reinstalled back to the one it wouldnt do before >>>> >>>> pc back to normal >>>> >>>> but every time i do a checkdisk it always finds a few minor errors >>>> >>>> i know in it self they are nothing - e.g. unused indexes etc. >>>> >>>> but its every time >>>> >>>> it leaves me with an uneasy feeling - wondering if its HD or maybe >>>> the sata cable ? >>>> >>>> >>>> any ideas welcome >>>> >>>> thanks >>>> >>> >>> from speedfan smart readings >>> >>> Attribute Current Raw Overall >>> Raw Read Error Rate 100 0 Normal >>> 3Spin Up Time 77 7640 Normal >>> Start/Stop Count 100 217 Very good >>> Reallocated Sector Count100 0 Very good >>> Seek Error Rate 253 0 Very good >>> Seek Time Performance 100 0 Very good >>> Power On Hours Count 100 556 Very good >>> Spin Retry Count 100 0 Very good >>> Calibration Retry Count 100 0 Very good >>> Power Cycle Count 100 214 Very good >>> Read Soft Error Rate 100 0 Normal >>> Unknown attribute 183 100 0 Very good >>> Unknown attribute 184 100 0 Very good >>> Unknown attribute 187 100 0 Very good >>> Unknown attribute 188 100 0 Very good >>> Airflow Temperature 74 437321754 Good >>> Hardware ECC Recovered 100 166714 Very good >>> Reallocated Event Count 100 0 Very good >>> Current Pending Sector 100 0 Very good >>> Offline Uncorrectable Sector Count 100 0 Very good >>> Ultra DMA CRC Error Rate 100 0 Normal >>> Write Error Rate 100 0 Normal >>> Soft Read Error Rate 253 0 Very good >> >> The hard drive looks fine. >> >> Is there anything useful in the system logs ? >> >> You dont say what OS you are using. >> > > hi > > xp pro sp3 > > > error code > ========== > > 32 (0x70020) date time The archive is corrupted: None > > > 502 (0x101F6) date time Operation with partition "0-0" was terminated > details image corruption (0x70020) > tag = 0xF5F8CBCF76155638 > > > not checked disk for a day - so might do tomorrow> > > the big tag show sup on google but in foreign > > http://www.google.co.uk/search?q=0xF...s=sn4&filter=0 > > > > > > > > > > and the little tag is there as well |
|
#6
08-25-2008, 08:34 PM
|
| Re: Acronis TI Home 11 - image corruption ? june > Rod Speed wrote: >> june >>> june wrote: >>>> Hi >>>> >>>> had a few pc issues recently >>>> >>>> so went for a full format of the c: partition >>>> and full load from scratch >>>> >>>> then after about 6 backups later - so pc fully loaded >>>> >>>> acronis failed to start up - didnt think anything of it >>>> >>>> was ok after >>>> >>>> had a printer install hang - so had a forced reboot >>>> >>>> so decided to go backto the image before the printer to be extra >>>> clean acronis said image corrupt - oh dear . . . >>>> >>>> anyway - if i boot up from the acronis boot cd - all images verify >>>> so i reinstalled back to the one it wouldnt do before >>>> >>>> pc back to normal >>>> >>>> but every time i do a checkdisk it always finds a few minor errors >>>> >>>> i know in it self they are nothing - e.g. unused indexes etc. >>>> >>>> but its every time >>>> >>>> it leaves me with an uneasy feeling - wondering if its HD or maybe >>>> the sata cable ? >>>> >>>> >>>> any ideas welcome >>>> >>>> thanks >>>> >>> >>> from speedfan smart readings >>> >>> Attribute Current Raw Overall >>> Raw Read Error Rate 100 0 Normal >>> 3Spin Up Time 77 7640 Normal >>> Start/Stop Count 100 217 Very good >>> Reallocated Sector Count100 0 Very good >>> Seek Error Rate 253 0 Very good >>> Seek Time Performance 100 0 Very good >>> Power On Hours Count 100 556 Very good >>> Spin Retry Count 100 0 Very good >>> Calibration Retry Count 100 0 Very good >>> Power Cycle Count 100 214 Very good >>> Read Soft Error Rate 100 0 Normal >>> Unknown attribute 183 100 0 Very good >>> Unknown attribute 184 100 0 Very good >>> Unknown attribute 187 100 0 Very good >>> Unknown attribute 188 100 0 Very good >>> Airflow Temperature 74 437321754 Good >>> Hardware ECC Recovered 100 166714 Very good >>> Reallocated Event Count 100 0 Very good >>> Current Pending Sector 100 0 Very good >>> Offline Uncorrectable Sector Count 100 0 Very good >>> Ultra DMA CRC Error Rate 100 0 Normal >>> Write Error Rate 100 0 Normal >>> Soft Read Error Rate 253 0 Very good >> >> The hard drive looks fine. >> >> Is there anything useful in the system logs ? >> >> You dont say what OS you are using. >> >> > > hi > > xp pro sp3 > > > error code > ========== > > 32 (0x70020) date time The archive is corrupted: None > > > 502 (0x101F6) date time Operation with partition "0-0" was > terminated details image corruption (0x70020) > tag = 0xF5F8CBCF76155638 I meant the XP system logs, not the TI logs. > not checked disk for a day - so might do tomorrow> > > the big tag show sup on google but in foreign > > http://www.google.co.uk/search?q=0xF...s=sn4&filter=0 |
|
#7
08-26-2008, 01:49 PM
|
| Re: Acronis TI Home 11 - image corruption ? Rod Speed wrote: > june >> Rod Speed wrote: >>> june >>>> june wrote: >>>>> Hi >>>>> >>>>> had a few pc issues recently >>>>> >>>>> so went for a full format of the c: partition >>>>> and full load from scratch >>>>> >>>>> then after about 6 backups later - so pc fully loaded >>>>> >>>>> acronis failed to start up - didnt think anything of it >>>>> >>>>> was ok after >>>>> >>>>> had a printer install hang - so had a forced reboot >>>>> >>>>> so decided to go backto the image before the printer to be extra >>>>> clean acronis said image corrupt - oh dear . . . >>>>> >>>>> anyway - if i boot up from the acronis boot cd - all images verify >>>>> so i reinstalled back to the one it wouldnt do before >>>>> >>>>> pc back to normal >>>>> >>>>> but every time i do a checkdisk it always finds a few minor errors >>>>> >>>>> i know in it self they are nothing - e.g. unused indexes etc. >>>>> >>>>> but its every time >>>>> >>>>> it leaves me with an uneasy feeling - wondering if its HD or maybe >>>>> the sata cable ? >>>>> >>>>> >>>>> any ideas welcome >>>>> >>>>> thanks >>>>> >>>> from speedfan smart readings >>>> >>>> Attribute Current Raw Overall >>>> Raw Read Error Rate 100 0 Normal >>>> 3Spin Up Time 77 7640 Normal >>>> Start/Stop Count 100 217 Very good >>>> Reallocated Sector Count100 0 Very good >>>> Seek Error Rate 253 0 Very good >>>> Seek Time Performance 100 0 Very good >>>> Power On Hours Count 100 556 Very good >>>> Spin Retry Count 100 0 Very good >>>> Calibration Retry Count 100 0 Very good >>>> Power Cycle Count 100 214 Very good >>>> Read Soft Error Rate 100 0 Normal >>>> Unknown attribute 183 100 0 Very good >>>> Unknown attribute 184 100 0 Very good >>>> Unknown attribute 187 100 0 Very good >>>> Unknown attribute 188 100 0 Very good >>>> Airflow Temperature 74 437321754 Good >>>> Hardware ECC Recovered 100 166714 Very good >>>> Reallocated Event Count 100 0 Very good >>>> Current Pending Sector 100 0 Very good >>>> Offline Uncorrectable Sector Count 100 0 Very good >>>> Ultra DMA CRC Error Rate 100 0 Normal >>>> Write Error Rate 100 0 Normal >>>> Soft Read Error Rate 253 0 Very good >>> The hard drive looks fine. >>> >>> Is there anything useful in the system logs ? >>> >>> You dont say what OS you are using. >>> >>> >> hi >> >> xp pro sp3 >> >> >> error code >> ========== >> >> 32 (0x70020) date time The archive is corrupted: None >> >> >> 502 (0x101F6) date time Operation with partition "0-0" was >> terminated details image corruption (0x70020) >> tag = 0xF5F8CBCF76155638 > > I meant the XP system logs, not the TI logs. > > >> not checked disk for a day - so might do tomorrow>> >> >> the big tag show sup on google but in foreign >> >> http://www.google.co.uk/search?q=0xF...s=sn4&filter=0 > > this is the HP printer hang Faulting application autorun.exe, version 6.0.0.0, faulting module autorun.exe, version 6.0.0.0, fault address 0x0000ea61. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. |
|
#8
08-29-2008, 11:27 PM
|
| Re: Acronis TI Home 11 - image corruption ? Previously june > june wrote: >> Hi >> >> had a few pc issues recently >> >> so went for a full format of the c: partition >> and full load from scratch >> >> then after about 6 backups later - so pc fully loaded >> >> acronis failed to start up - didnt think anything of it >> >> was ok after >> >> had a printer install hang - so had a forced reboot >> >> so decided to go backto the image before the printer to be extra clean >> >> acronis said image corrupt - oh dear . . . >> >> anyway - if i boot up from the acronis boot cd - all images verify >> so i reinstalled back to the one it wouldnt do before >> >> pc back to normal >> >> but every time i do a checkdisk it always finds a few minor errors >> >> i know in it self they are nothing - e.g. unused indexes etc. >> >> but its every time >> >> it leaves me with an uneasy feeling - wondering if its HD or maybe the >> sata cable ? >> >> >> any ideas welcome >> >> thanks >> > from speedfan smart readings > Attribute Current Raw Overall > Raw Read Error Rate 100 0 Normal > 3Spin Up Time 77 7640 Normal > Start/Stop Count 100 217 Very good > Reallocated Sector Count100 0 Very good > Seek Error Rate 253 0 Very good > Seek Time Performance 100 0 Very good > Power On Hours Count 100 556 Very good > Spin Retry Count 100 0 Very good > Calibration Retry Count 100 0 Very good > Power Cycle Count 100 214 Very good > Read Soft Error Rate 100 0 Normal > Unknown attribute 183 100 0 Very good > Unknown attribute 184 100 0 Very good > Unknown attribute 187 100 0 Very good > Unknown attribute 188 100 0 Very good > Airflow Temperature 74 437321754 Good > Hardware ECC Recovered 100 166714 Very good > Reallocated Event Count 100 0 Very good > Current Pending Sector 100 0 Very good > Offline Uncorrectable Sector Count 100 0 Very good > Ultra DMA CRC Error Rate 100 0 Normal > Write Error Rate 100 0 Normal > Soft Read Error Rate 253 0 Very good The disk is fine and so is the cable. Maybe some pice of intrusive spyware or a virus? Arno |
