On Tue, 26 Dec 2006 22:56:37 -0000, no@spam.invalid (nroiter) wrote:

>The ribbon cables are attached to a CD R/W and a DVD drive.
>
>There appears to be connectors for a second serial ATA-- is this the
>way to go?

2 options: return the hard drive and buy serial version instead or buy
a DVD with CD burner built in (or get a DVD burner which supports CD
burning) for around $50, take out the 2 old drives, and put in the new
hard drive.

The latter would leave an empty 5.25" bay and I don't know if your
model have external flap to hide the drive or not but if it doesn't,
you'll have a big hole in the front.

The former is probably a bit easier since you don't remove anything,
just add the drive, plug in SATA cable and power cable, and it's set.
Do make sure there's extra power connector inside to go with the new
hard drive, and DO make sure you have SATA connector as some hard
drive may not have one included.

nroiter wrote

> My 8400 has a Seagate Serial ATA dirve (160 GB). I want
> to add a seocnd drive, but made the mistake of getting an
> Ultra ATA, which the motherboard doesn't support.

> The ribbon cables are attached to a CD R/W and a DVD drive.

> There appears to be connectors for a second serial ATA-- is this the way to go?

Yep.

Previously Impmon wrote:
> On Tue, 26 Dec 2006 22:56:37 -0000, no@spam.invalid (nroiter) wrote:

>>The ribbon cables are attached to a CD R/W and a DVD drive.
>>
>>There appears to be connectors for a second serial ATA-- is this the
>>way to go?

> 2 options: return the hard drive and buy serial version instead or buy
> a DVD with CD burner built in (or get a DVD burner which supports CD
> burning) for around $50, take out the 2 old drives, and put in the new
> hard drive.

> The latter would leave an empty 5.25" bay and I don't know if your
> model have external flap to hide the drive or not but if it doesn't,
> you'll have a big hole in the front.

> The former is probably a bit easier since you don't remove anything,
> just add the drive, plug in SATA cable and power cable, and it's set.
> Do make sure there's extra power connector inside to go with the new
> hard drive, and DO make sure you have SATA connector as some hard
> drive may not have one included.

3rd option: Get an ATA to SATA converter. Not really cost efficient.
If you can exchange the drive for an SATA one, do so.

4th Option: Get an IDE controller, e.g. a Promise ultra 133TX2.

Arno