Hello Adeel

can you please also explain the step by step (like you did below) wccp
configuration*for OS (Redhat 9.0) and Squid too.

Regards

Mahmood Ahmed
Buraak Telecommunications Pvt. Ltd.
---------------------------------------------------------
This mail has been sent using Buraak Net's Mailing System
(http://www.buraak.net.pk)

---------- Original Message -----------
From: "Adeel Asher"
To: "'squid'"
Sent: Wed, 25 Feb 2004 10:34:45 +0500
Subject: RE: [squid-users] WCCP Configuration

> Here You Go
>
> Router #
> Router (config)# *ip wccp version 1
> Router (config)# *ip wccp web-cache redirect-list 125
> Router (config)# *ip wccp web-cache redirect out
> Router (config)# *ip wccp redirect exclude in
> Router (config)# *ip wccp web-cache redirect out
>
> Access-List 125
>
> permit ip 192.168.92.0 0.0.0.255 any
> permit ip 192.168.93.0 0.0.0.255 any
> permit ip 192.168.94.0 0.0.0.255 any
> permit ip 192.168.95.0 0.0.0.255 any
> permit ip 192.168.96.0 0.0.0.255 any
> permit ip 192.168.97.0 0.0.0.255 any
> permit ip 192.168.98.0 0.0.0.255 any
>
> All permitted hosts in this access list will be redirected to squid for
web
> traffic.
>
> Router #Conf t
> Router (config)#
> Router (config)# * interface fastethernet 0
> Router(config-if)# ip wccp web-cache redirect out
>
> Router # Conf t
> Router(config)#
> Router(config)# * *Interface serial 0
> Router(config-if)# ip wccp redirect exclude in
> Router(config-if)# ip wccp web-cache redirect out
>
> I am assuming that your router serial is connected to WAN and FastEthernet
> to LAN. If you have more than one serials you will have to enable it on
all.
>
> Regards,
> Adeel Asher
> WorldCALL Multimedia
> Lahore
> PK
>
> -----Original Message-----
> >From: Danish Khan [mailto:danish.khan@go4b.net]
>
> >Sent: Wednesday, February 25, 2004 4:31 AM
> >T0: 'squid'
> >Subject: [squid-users] WCCP Configuration
>
> >Can any body please explain the router configuration for WCCP.
>
> >Danish Khan
------- End of Original Message -------