Anyone out there gotten a D-Link 540T to work under Solaris 10 or later? (attached scanpci.txt) - scanpci.txt [0/1] - Solaris

This is a discussion on Anyone out there gotten a D-Link 540T to work under Solaris 10 or later? (attached scanpci.txt) - scanpci.txt [0/1] - Solaris ; OK as requested I've run the scanpci -v command /usr/X11/bin/scanpci -v from the system and the output is attached. Anyone have any suggestions? Is there a cross reference chart for the different pci ids? Thx in advance.... Scott...

+ Reply to Thread
Results 1 to 2 of 2

Thread: Anyone out there gotten a D-Link 540T to work under Solaris 10 or later? (attached scanpci.txt) - scanpci.txt [0/1]

  1. Anyone out there gotten a D-Link 540T to work under Solaris 10 or later? (attached scanpci.txt) - scanpci.txt [0/1]

    OK as requested I've run the scanpci -v command

    /usr/X11/bin/scanpci -v from the system and the output is attached.

    Anyone have any suggestions?

    Is there a cross reference chart for the different pci ids?

    Thx in advance....

    Scott

  2. Re: Anyone out there gotten a D-Link 540T to work under Solaris 10 or later? (attached scanpci.txt) - scanpci.txt [0/1]

    In article ,
    Scott Mann wrote:
    >OK as requested I've run the scanpci -v command
    >
    >/usr/X11/bin/scanpci -v from the system and the output is attached.


    pci bus 0x0000 cardnum 0x0a function 0x00: vendor 0x1186 device 0x4c00
    D-Link System Inc Gigabit Ethernet Adapter
    STATUS 0x02b0 COMMAND 0x0017
    CLASS 0x02 0x00 0x00 REVISION 0x11
    BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x08
    BASE0 0xd5800000 addr 0xd5800000 MEM
    BASE1 0x00009801 addr 0x00009800 I/O
    MAX_LAT 0x1f MIN_GNT 0x17 INT_PIN 0x01 INT_LINE 0x09
    BYTE_0 0xff BYTE_1 0x00 BYTE_2 0xf0 BYTE_3 0x01

    >Anyone have any suggestions?


    The PCI Database suggests that this device might use
    the Marvell 88E8003 chipset.


    Try the Yukon driver.


    John
    groenveld@acm.org

+ Reply to Thread