--===============1715572413==
Content-Type: multipart/alternative;
boundary="----=_Part_1260_8548457.1206539846295"

------=_Part_1260_8548457.1206539846295
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Have you checked whether a select is failing somewhere? It can generate a
tight loop with such full CPU utilization. I remember this from a non-SNMP
project, but select is used everywhere.

Larry Dickson


On 3/25/08, Siva Prakash Reddy G wrote:
>
> Hi!
>
> When I'm performing SNMP walk operation, CPU idle time is
> showing 0% that means maximum CPU utilization is taken SNMP, this is
> happening only in my mib. When I did same operation on host-resource mib or
> system mib or any other which provided by net-SNMP source coders, CPU idle
> time is showing 88% or 90%, but I'm performing SNMP walk on mib CPU idle
> time is showing 0% I don't know why this happening.
>
>
>
> If any body knows the solution for this problem, I will be thankful, if
> they share. At least if any body can list it out the reason for the problem,
> and then I will look into it.
>
>
>
>
>
>
>
> With Regards,
>
> G. Siva Prakash Reddy.
>
>
> This email message and its attachments may contain CONFIDENTIAL AND
> PRIVILEGED INFORMATION intended for the sole use of the addressee(s). If you
> have received it in error, please contact the sender by return email, notify
> your system manager and destroy the original message and any copies thereof.
> Any review, use, disclosure or distribution is unlawful. Please check this
> email and any attachments for the presence of viruses. The Company accepts
> no liability for any damage caused by any virus transmitted by this email.
> The views or opinions presented in this e-mail are solely those of the
> author and do not necessarily represent those of the company.
> The Company reserves the right to monitor, review and store the content of
> all messages sent to or from this e-mail address.
>
> www.aztecsoft.com
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
>
> http://ad.doubleclick.net/clk;164216...et/marketplace
> _______________________________________________
> Net-snmp-coders mailing list
> Net-snmp-coders@lists.sourceforge.net
> https://lists.sourceforge.net/lists/...et-snmp-coders
>
>


------=_Part_1260_8548457.1206539846295
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Have you checked whether a select is failing somewhere? It can generate a tight loop with such full CPU utilization. I remember this from a non-SNMP project, but select is used everywhere.

 

Larry Dickson

 

On 3/25/08, Siva Prakash Reddy G <sivag@aztecsoft.com> wrote:



Hi!


            When I'm performing SNMP walk operation, CPU idle time is showing 0% that means maximum CPU utilization is taken SNMP, this is happening only in my mib. When I did same operation on host-resource mib or system mib or any other which provided by net-SNMP source coders, CPU idle time is showing 88% or 90%, but I'm performing SNMP walk on mib CPU idle time is showing 0% I don't know  why this happening.



 


If any body knows the solution for this problem, I will be thankful, if they share. At least if any body can list it out the reason for the problem, and then I will look into it.



 


 


 


       With Regards,


G. Siva Prakash Reddy.


 





This email message and its attachments may contain CONFIDENTIAL AND PRIVILEGED INFORMATION intended for the sole use of the addressee(s). If you have received it in error, please contact the sender by return email, notify your system manager and destroy the original message and any copies thereof. Any review, use, disclosure or distribution is unlawful. Please check this email and any attachments for the presence of viruses. The Company accepts no liability for any damage caused by any virus transmitted by this email. The views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of the company.

The Company reserves the right to monitor, review and store the content of all messages sent to or from this e-mail address.

www.aztecsoft.com


-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.

http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

_______________________________________________
Net-snmp-coders mailing list
Net-snmp-coders@lists.sourceforge.net

https://lists.sourceforge.net/lists/listinfo/net-snmp-coders





------=_Part_1260_8548457.1206539846295--


--===============1715572413==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216...et/marketplace
--===============1715572413==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________
Net-snmp-coders mailing list
Net-snmp-coders@lists.sourceforge.net
https://lists.sourceforge.net/lists/...et-snmp-coders

--===============1715572413==--