Hi!
Thank you very much for replying
I am using net-snmp version 5.1.2, I have read a lots
of documents for proxy settings, but no use of it. My requirement is
there are 3BPL modems , they dehaves as subagents, they are having same
OIDS, I am trying to retrives the values from the same OID's, And my
configuration file shows
Below.


################################################## ######################
#########
# Here we define the access control details about the agent
# First, map the community name "public" into a "security name"
# sec.name source community

com2sec notConfigUser default public
com2sec ConfigUser default private
com2sec -Cn modemhost1 remhost1 10.10.1.10/255.255.255.255 public
com2sec -Cn modemhost2 remhost2 10.10.1.20/255.255.255.255 public
com2sec -Cn modemhost3 remhost3 10.10.1.30/255.255.255.255 public

# Second, map the security name into a group name:
# groupName securityModel securityName

group notConfigGroup v1 notConfigUser
group notConfigGroup v2c notConfigUser
group ConfigGroup v1 ConfigUser
group ConfigGroup v2c ConfigUser
group remotehost1 v1 remhost1
group remotehost1 v2c remhost1
group remotehost2 v1 remhost2
group remotehost2 v2c remhost2
group remotehost3 v1 remhost3
group remotehost3 v2c remhost3

# Third, create a view for us to let the group have rights to:
# name incl/excl subtree
mask(optional)

view systemview included .1.3.6
view systemview included mib-2
view systemview included snmpV2
view systemview included .1.3.6.1.4.1.2021.9
view systemview included .1.3.6.1.4.1.2021.10
view systemview included .1.3.6.1.4.1.13995
view systemview included .1.3.6.1.4.1.6798


# Finally, grant the group read-only access to the systemview view.
# group context sec.model sec.level prefix read
write notif

access notConfigGroup "" any noauth exact systemview
none none
access notConfigGroup "" any noauth exact systemview
none none
access ConfigGroup "" any noauth exact systemview
systemview none
access ConfigGroup "" any noauth exact systemview
systemview none
access remotehost1 modemhost1 any noauth exact
systemview none none
access remotehost2 modemhost2 any noauth exact
systemview none none
access remotehost3 modemhost3 any noauth exact
systemview none none

proxy -Cn modemhost1 -v 2c -c public remotehost1 1.3.6.1.4.1.6798
proxy -Cn modemhost2 -v 2c -c public remotehost2 1.3.6.1.4.1.6798
proxy -Cn modemhost3 -v 2c -c public remotehost2 1.3.6.1.4.1.6798
If I run the agent with above mentioned snmpd configuration file I am
getting an error like.

/etc/snmp/snmpd.conf: line 48: Error: bad source address
/etc/snmp/snmpd.conf: line 49: Error: bad source address
/etc/snmp/snmpd.conf: line 50: Error: bad source address
net-snmp: 3 error(s) in config file(s)

Here line 48 means "com2sec -Cn modemhost1 remhost1
10.10.1.10/255.255.255.255 public"
And line 49 means "com2sec -Cn modemhost2 remhost1
10.10.1.20/255.255.255.255 public"
And line 50 means "com2sec -Cn modemhost3 remhost1
10.10.1.20/255.255.255.255 public"


I don't know when to use context name even I don't know where things
are going wrong . Please help me out from this problem, Can I get any
good document regarding proxy settings with example .



With Regards.
G.Siva Prakash Reddy.



-----Original Message-----
From: dave.shield@googlemail.com [mailto:dave.shield@googlemail.com] On
Behalf Of Dave Shield
Sent: Thursday, May 03, 2007 3:51 AM
To: Siva Prakash Reddy G
Cc: net-snmp-coders@lists.sourceforge.net
Subject: Re: snmp proxy settings.


On 27/04/07, Siva Prakash Reddy G wrote:
> I am very new to Net-snmp,How to write proxy settings (
> snmpd.conf ) for multiple agents. if anybody knows. please do let me
> know.


Can you be a little more explicit about exactly what you mean by this.
What exactly are you trying to monitor?

Which version of the code are you working with?
Which version(s) of SNMP can you use?

I suspect that the thread "Proxy questions" on the users list (starting
on 26th April) may be of some use to you.

Dave


The information contained in, or attached to, this e-mail, contains confidential information and is intended solely for the use of the individual or entity to whom they are addressed and is subject to legal privilege. If you have received this e-mail in error you should notify the sender immediately by reply e-mail, delete the message from your system and notify your system manager. Please do not copy it for any purpose, or disclose its contents to any other person. The views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of the company. The recipient should check this e-mail and any attachments for the presence of viruses. The company accepts no liability for any damage caused, directly or indirectly, by any virus transmitted in this email.

www.aztecsoft.com

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Net-snmp-coders mailing list
Net-snmp-coders@lists.sourceforge.net
https://lists.sourceforge.net/lists/...et-snmp-coders