acpi thermal zone - Slackware

This is a discussion on acpi thermal zone - Slackware ; Hello there, I use Slack 12.1 with a recompiled kernel (2.6.24-7) on a Gigabyte "GA-8I915P dual graphic" motherboard. ACPI is enabled in the kernel and the thermal module load correctly at startup. With dmesg, anything look normal (except that he ...

+ Reply to Thread
Results 1 to 2 of 2

Thread: acpi thermal zone

  1. acpi thermal zone

    Hello there,

    I use Slack 12.1 with a recompiled kernel (2.6.24-7) on a Gigabyte
    "GA-8I915P dual graphic" motherboard.

    ACPI is enabled in the kernel and the thermal module load correctly at
    startup.
    With dmesg, anything look normal (except that he dont speak about
    thermal zone...).
    ACPID is also running.


    The /proc/acpi/thermal-zone directory stay empty....


    I see that in /var/log/system :

    PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO

    but I am not shure that this is related to my problem...



    Have anybody a way to solve the problem ?

    Thanks.

    Philippe




    Here is the output of "dmesg | grep ACPI" :

    BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
    BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
    ACPI: RSDP 000F6BB0, 0014 (r0 GBT )
    ACPI: RSDT 7FFF3040, 0038 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
    ACPI: FACP 7FFF30C0, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
    ACPI: DSDT 7FFF3180, 3AE7 (r1 GBT AWRDACPI 1000 MSFT 100000C)
    ACPI: FACS 7FFF0000, 0040
    ACPI: MCFG 7FFF6D80, 003C (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
    ACPI: APIC 7FFF6CC0, 0068 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
    ACPI: SSDT 7FFF6E00, 015C (r1 PmRef Cpu0Ist 3000 INTL 20040311)
    ACPI: SSDT 7FFF7290, 014E (r1 PmRef CpuPm 3000 INTL 20040311)
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: Core revision 20070126
    ACPI: bus type pci registered
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
    disabled.
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
    disabled.
    ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
    disabled.
    ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    ACPI: RTC can wake from S4
    ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 17
    ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
    ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 18
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
    parport_pc 00:09: reported by Plug and Play ACPI
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
    ACPI: Processor [CPU0] (supports 2 throttling states)
    ACPI: SSDT 7FFF7200, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
    ACPI: Processor [CPU1] (supports 2 throttling states)
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PWRB]
    ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 23 (level, low) -> IRQ 19
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
    ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
    ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 16 (level, low) -> IRQ 16
    ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 20


    sorry, it's long.

  2. Re: acpi thermal zone

    Wawa.voum <"pas.de@spams.ici.fr"> wrote:
    > Hello there,
    >
    > I use Slack 12.1 with a recompiled kernel (2.6.24-7) on a Gigabyte
    > "GA-8I915P dual graphic" motherboard.
    >
    > ACPI is enabled in the kernel and the thermal module load correctly at
    > startup.
    > With dmesg, anything look normal (except that he dont speak about
    > thermal zone...).
    > ACPID is also running.
    >
    >
    > The /proc/acpi/thermal-zone directory stay empty....
    >

    I'd guess that the mboard doesn't support thermal zones, or at least
    make the info available via ACPI. My 2 laptops both show thermal zone
    info, but my server doesn't, using the same kernels and software.

    Jerry

+ Reply to Thread