Graham Prout escribió:
> Is there anyway to get a composite signal from a plus3 and possibly a gray

http://www.fruitcake.plus.com/Sincla...CableFrame.htm

Ok thanks this will work on the Spectrum +2 Gray modle but has anyone
anyidea about the Plus3?

Regards

Graham

On Tue, 23 Jan 2007, Graham Prout wrote:

> Ok thanks this will work on the Spectrum +2 Gray modle but has anyone
> anyidea about the Plus3?

The +3 has no composite output as standard. You could take a composite
feed off the input to the modulator, or possibly directly off the PAL
encoder chip, if you can find it!

--
Please remove all-your-clothes before replying.

Does the modulator in the plus3 still have the composite sent to it?


Regards

Graham

Graham Prout schrieb:

> Is there anyway to get a composite signal from a plus3 and possibly a gray
> plus2, i know that you can get a signal from the modulator on a 48k but dont
> know about the other 2 any help welcome.

Hi Graham,
just get the Video-Modulator for +3 at www.sintech-shop.de . This small
piece of hardware converts the signal of the normal modulator in your
Spectrum +3 to a proper Video-signal.

Regards

Thomas

Sorted it now very simple circut.

Parts

3 x 1N418
1 x 2.2k resistor
1 x 25ohm resistor
1 x BC237(337)

Conect the 3 diodes in series put the first one to pin 6 of IC 9(TEA2000)
silver line away from the ic, conect the 2.2k to 41R and the end of the 3
diodes abd the base of the tranmiter(BC237(337)) conect the colector to the
left side of L3 for +12v and the emitter to the 75ohm then to the composite
and thats it cool picture.

There are 2 diagrams on the net here:-

http://user.tninet.se/~vjz762w/
http://www.secarica.ro/plus3_composite_video.pdf

Regards


Graham