Hi all!
I have a Toshiba SCSI DVD drive that I hooked up to my octane, but
everytime I try to put in a DVD, irix responds that it cant mount the
filesystem!! I have UDF installed. Anyone know what Im doing wrong?
Full info at the bottom.
cheers!!
mike


$
$ uname -aR
IRIX64 octane 6.5 6.5.21m 07141529 IP30


$ versions |grep udf
I eoe.sw.udf 08/28/2003 UDF Filesystem Support


$ hinv -vm
Location: /hw/node
PM20250MHZ Board: barcode HBA165 part 030-1286-002 rev B
Location: /hw/node/xtalk/15
IP30 Board: barcode GYL577 part 030-0887-004 rev B
Location: /hw/node/xtalk/15/pci/2
FP1 Board: barcode 34907C part 030-0891-003 rev E
PWR.SPPLY.ER Board: barcode AAE8250450 part 060-0035-001 rev B
Location: /hw/node/xtalk/13
XTALKPCI Board: barcode GPP631 part 030-0952-005 rev C
Location: /hw/node/xtalk/13/pci/3
PCI_ENET Board: barcode KVR226 part 030-1155-002 rev D
Location: /hw/node/xtalk/12
MOT20 Board: barcode GKK214 part 030-1240-003 rev D
Location: /hw/node/xtalk/11
EVO Board: barcode GPT407 part 030-1156-003 rev B
Location: /hw/node/xtalk/9
MOT10 Board: barcode HRE284 part 030-1241-002 rev G
2 250 MHZ IP30 Processors
Heart ASIC: Revision E
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Main memory size: 1024 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Disk drive: unit 3 on SCSI controller 0 (unit 3)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 1 (unit 1)
Disk drive: unit 2 on SCSI controller 1 (unit 2)
Disk drive: unit 3 on SCSI controller 1 (unit 3)
Integral SCSI controller 2: Version QL1080, single ended
Disk drive: unit 2 on SCSI controller 2 (unit 2)
Tape drive: unit 4 on SCSI controller 2: DAT
CDROM: unit 5 on SCSI controller 2
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: EMXI
Graphics board: ESI
Integral Fast Ethernet: ef0, version 1, pci 2
Fast Ethernet: ef1, version 1, pci 3
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
PCI Adapter ID (vendor 0x1077, device 0x1080) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 3
Personal Video: unit 1, revision 2.0



octane 1# /usr/freeware/bin/cdrecord -scanbus
Cdrecord 2.00.3 (mips-sgi-irix6.5) Copyright (C) 1995-2002 Jörg
Schilling
Using libscg version 'schily-0.7'
scsibus0:
0,0,0 0) *
0,1,0 1) *
0,2,0 2) 'SEAGATE ' 'ST136403LSUN36G ' '034A' Disk
0,3,0 3) 'SEAGATE ' 'ST336753LC ' 'DX03' Disk
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
scsibus1:
1,0,0 100) *
1,1,0 101) 'IBM ' 'DNES-318350Y ' 'SAH0' Disk
1,2,0 102) 'SEAGATE ' 'ST136403LSUN36G ' '034A' Disk
1,3,0 103) 'FUJITSU ' 'MAF3364L SUN36G ' '1213' Disk
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
scsibus2:
2,0,0 200) *
2,1,0 201) *
2,2,0 202) 'SEAGATE ' 'ST336704LSUN36G ' '0326' Disk
2,3,0 203) *
2,4,0 204) 'HP ' 'C1537A ' 'L706' Removable Tape

2,5,0 205) 'TOSHIBA ' 'DVD-ROM SD-M1401' '1007' Removable
CD-ROM
2,6,0 206) *
2,7,0 207) *