Mysterious alert in syslog of an Onyx2 - SGI

This is a discussion on Mysterious alert in syslog of an Onyx2 - SGI ; Hi! In the last times i can find this enty in the syslog of an onyx2 from time to time: Oct 18 14:32:33 1A nyx2 unix: ALERT: /hw/module/1/slot/io1/baseio/pci/7: RAD thread held off for more than 32 mS Oct 18 14:36:18 ...

+ Reply to Thread
Results 1 to 3 of 3

Thread: Mysterious alert in syslog of an Onyx2

  1. Mysterious alert in syslog of an Onyx2

    Hi!

    In the last times i can find this enty in the syslog of an onyx2 from
    time to time:

    Oct 18 14:32:33 1Anyx2 unix: ALERT: /hw/module/1/slot/io1/baseio/pci/7: RAD thread held off for more than 32 mS
    Oct 18 14:36:18 1Anyx2 unix: ALERT: /hw/module/1/slot/io1/baseio/pci/7: RAD thread held off for more than 32 mS

    I can't see any malfunction on the system, but because it is an ALERT
    it makes me a little nervous...
    The device that brings the alert seems to be on the BaseIO-Module, but
    i have no idea what it is. The OS is 6.5.21m, here is a complete hinv:

    # hinv -mvv
    Location: /hw/module/1/slot/n2/node
    IP31 Board: barcode HTY040 part 030-1255-003 rev B
    Group ff Capability ffffffff Variety ff Laser 0000003407a0
    IP31PIMM Board: barcode GCN075 part 030-1313-002 rev A
    Group ff Capability ffffffff Variety ff Laser 00000017b79a
    Location: /hw/module/1/slot/n1/node
    MODULEID Board: barcode K0009837 part rev
    Group ff Capability ffffffff Variety ff Laser 00000092f4ac
    4P1G5_MPLN Board: barcode DKA301 part 013-1839-001 rev E
    Group ff Capability ffffffff Variety ff Laser 000000158be4
    IP31PIMM Board: barcode GCF752 part 030-1313-002 rev B
    Group ff Capability ffffffff Variety ff Laser 0000002a0563
    IP31 Board: barcode HTY396 part 030-1255-003 rev D
    Group ff Capability ffffffff Variety ff Laser 000000343efb
    Location: /hw/module/1/slot/io4/kona
    GE14-2 Board: barcode DZV164 part 030-1051-002 rev B
    Group ff Capability ffffffff Variety ff Laser 000000125ef7
    Location: /hw/module/1/slot/io2/pci_xio
    PCI_XIO Board: barcode HLT708 part 030-1062-002 rev E
    Group ff Capability ffffffff Variety ff Laser 0000002ffe74
    Location: /hw/module/1/slot/io1/baseio
    MIO Board: barcode FEM250 part 030-0880-003 rev E
    Group ff Capability ffffffff Variety ff Laser 0000001698cc
    BASEIO Board: barcode ENX311 part 030-0734-002 rev B
    Group ff Capability ffffffff Variety ff Laser 0000000c5f61
    4 250 MHZ IP27 Processors
    CPU: MIPS R10000 Processor Chip Revision: 3.4
    FPU: MIPS R10010 Floating Point Chip Revision: 3.4
    Location: /hw/module/1/slot/n2/node/cpubus/0/a
    CPU 0 at Module 1/Slot 2/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled)
    Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9
    Location: /hw/module/1/slot/n2/node/cpubus/0/b
    CPU 1 at Module 1/Slot 2/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled)
    Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9
    Location: /hw/module/1/slot/n1/node/cpubus/0/a
    CPU 2 at Module 1/Slot 1/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled)
    Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9
    Location: /hw/module/1/slot/n1/node/cpubus/0/b
    CPU 3 at Module 1/Slot 1/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled)
    Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9
    Main memory size: 4096 Mbytes
    Instruction cache size: 32 Kbytes
    Data cache size: 32 Kbytes
    Secondary unified instruction/data cache size: 4 Mbytes
    Location: /hw/module/1/slot/n2/node/memory
    Memory at Module 1/Slot 82: 2048 MB (enabled)
    Bank 0 contains 512 MB (Standard) DIMMS (enabled)
    Bank 1 contains 512 MB (Standard) DIMMS (enabled)
    Bank 2 contains 512 MB (Standard) DIMMS (enabled)
    Bank 3 contains 512 MB (Standard) DIMMS (enabled)
    Location: /hw/module/1/slot/n1/node/memory
    Memory at Module 1/Slot 81: 2048 MB (enabled)
    Bank 0 contains 512 MB (Standard) DIMMS (enabled)
    Bank 1 contains 512 MB (Standard) DIMMS (enabled)
    Bank 2 contains 512 MB (Standard) DIMMS (enabled)
    Bank 3 contains 512 MB (Standard) DIMMS (enabled)
    Integral SCSI controller 2: Version QL1080, low voltage differential
    Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
    Disk drive: unit 1 on SCSI controller 0 (unit 1)
    Disk drive: unit 2 on SCSI controller 0 (unit 2)
    Disk drive: unit 3 on SCSI controller 0 (unit 3)
    CDROM: unit 6 on SCSI controller 0
    Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
    IOC3/IOC4 serial port: tty1
    IOC3/IOC4 serial port: tty2
    IOC3/IOC4 serial port: tty3
    IOC3/IOC4 serial port: tty4
    IOC3 parallel port: plp1
    Graphics board: Reality
    Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
    Iris Audio Processor: version RAD revision 7.0, number 1
    Origin PCI XIO board, module 1 slot 2: Revision 4
    Origin BASEIO board, module 1 slot 1: Revision 3
    PCI Adapter ID (vendor 0x1077, device 0x1080) PCI slot 0
    PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6
    PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
    PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
    PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
    PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7
    IOC3/IOC4 external interrupts: 1
    Location: /hw/module/1/slot/n2/node/hub
    HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled)
    Location: /hw/module/1/slot/n1/node/hub
    HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled)
    Location: /hw/module/1/slot/n2/node/prom
    IP27prom in Module 1/Slot n2: Revision 6.142
    Location: /hw/module/1/slot/n1/node/prom
    IP27prom in Module 1/Slot n1: Revision 6.142
    Location: /hw/module/1/slot/io1/baseio
    IO6prom on Global Master Baseio in Module 1/Slot io2: Revision 6.142

  2. Re: Mysterious alert in syslog of an Onyx2

    In article <3F9145F7.CC0C2B9A@machtnix.net>,
    Michael Schmidt wrote:
    :In the last times i can find this enty in the syslog of an onyx2 from
    :time to time:

    :Oct 18 14:32:33 1Anyx2 unix: ALERT: /hw/module/1/slot/io1/baseio/pci/7: RAD thread held off for more than 32 mS

    http://groups.google.ca/groups?hl=en...DC94%40sgi.com

    http://groups.google.ca/groups?hl=en...40arl.army.mil

    --
    I was very young in those days, but I was also rather dim.
    -- Christopher Priest

  3. Re: Mysterious alert in syslog of an Onyx2

    Walter Roberson schrieb:

    > http://groups.google.ca/groups?hl=en...DC94%40sgi.com
    >
    > http://groups.google.ca/groups?hl=en...40arl.army.mil


    Hmmm... i'm not in singleuser mode and have no octane. But thanks Walter, now i know
    it concerns the audio hardware or driver. I don't need the audio hardware on this
    machine, so no problem for me. But it would be interesting why this messags appear
    from time to time since a view weeks, but never before...

    Michael

+ Reply to Thread