Installing 5.0.7 on IBM XSeries 260 (8865) - SCO

This is a discussion on Installing 5.0.7 on IBM XSeries 260 (8865) - SCO ; Hello, would be grateful for help in installing 5.0.7 on the specified server. The server has both ServerRaid 8i and 6i installed I am using the boot string: restart link="ipsraid" Sdsk=ips(0,0,0,0) Srom=wd(0,0,0,0) I end up with the following messages: WARNING: ...

+ Reply to Thread
Results 1 to 2 of 2

Thread: Installing 5.0.7 on IBM XSeries 260 (8865)

  1. Installing 5.0.7 on IBM XSeries 260 (8865)

    Hello,

    would be grateful for help in installing 5.0.7 on the specified
    server. The server has both ServerRaid 8i and 6i installed

    I am using the boot string:

    restart link="ipsraid" Sdsk=ips(0,0,0,0) Srom=wd(0,0,0,0)

    I end up with the following messages:

    WARNING: (ips0): Controller initialization error - an internal command
    failed
    WARNING: ipsinit: Unable to initialize controller.

    I am using the drivers that came with the server.

    Would be grateful for any support in correcting this problem.

    Thanks

    mixgh


  2. Re: Installing 5.0.7 on IBM XSeries 260 (8865)

    Hello,

    mixgh schrieb:
    > Hello,
    >
    > would be grateful for help in installing 5.0.7 on the specified
    > server. The server has both ServerRaid 8i and 6i installed
    >

    The 8i is SAS and the 6i is SCSI?
    > I am using the boot string:
    >
    > restart link="ipsraid" Sdsk=ips(0,0,0,0) Srom=wd(0,0,0,0)
    >
    >

    The cdrom is connected as master to the first ide bus?
    > I end up with the following messages:
    >
    > WARNING: (ips0): Controller initialization error - an internal command
    > failed
    > WARNING: ipsinit: Unable to initialize controller.
    >

    Please check the settings of the ServerRaid BIOS.
    Or you could try newer drivers from:


    Regards,
    Andreas Kohl

+ Reply to Thread