cannot mount an 250 GB Harddisk to SCO 5.0.5 - SCO

This is a discussion on cannot mount an 250 GB Harddisk to SCO 5.0.5 - SCO ; hello i have a problem with SCO Openserver 5.0.5. I add an 250 GB Harddisk to my System, the Bios detect it sucsessfully. In SCO i install with mkdev hd 1 0 and it works. Fdisk and divvy works. fdisk ...

+ Reply to Thread
Results 1 to 3 of 3

Thread: cannot mount an 250 GB Harddisk to SCO 5.0.5

  1. cannot mount an 250 GB Harddisk to SCO 5.0.5

    hello

    i have a problem with SCO Openserver 5.0.5.

    I add an 250 GB Harddisk to my System, the Bios detect it sucsessfully.
    In SCO i install with mkdev hd 1 0 and it works.
    Fdisk and divvy works.

    fdisk screen:

    Current Hard Disk Drive: /dev/rhd10


    +-------------+----------+-----------+---------+---------+---------+
    | Partition | Status | Type | Start | End |
    Size |

    +-------------+----------+-----------+---------+---------+---------+
    | 1 | Active | UNIX | 1 | 7751999 |
    7751999 |

    +-------------+----------+-----------+---------+---------+---------+

    Total disk size: 7752255 tracks (256 reserved for masterboot and
    diagnostics)



    divvy screen:

    +-------------------+------------+--------+---+-------------+------------+
    | Name | Type | New FS | # | First Block | Last Block |
    +-------------------+------------+--------+---+-------------+------------+
    | platte2 | HTFS | no | 0 | 0| 244179966|
    | | NOT USED | no | 1 | -| -|
    | | NOT USED | no | 2 | -| -|
    | | NOT USED | no | 3 | -| -|
    | | NOT USED | no | 4 | -| -|
    | | NOT USED | no | 5 | -| -|
    | | NOT USED | no | 6 | -| -|
    | d1157all | WHOLE DISK | no | 7 | 0| 244187967|
    +-------------------+------------+--------+---+-------------+------------+
    244179967 1K blocks for divisions, 8001 1K blocks reserved for the system

    n[ame] Name or rename a division.
    c[reate] Create a new file system on this division.
    t[ype] Select or change filesystem type on new filesystems.
    p[revent] Prevent a new file system from being created on this
    division.
    s[tart] Start a division on a different block.
    e[nd] End a division on a different block.
    r[estore] Restore the original division table.



    but when i will mount the device with the Filesystem manager, takes very
    long time and hanging up!




    any ideas?!


    Thanks

  2. Re: cannot mount an 250 GB Harddisk to SCO 5.0.5


    "Frank Hauer" wrote in message
    news:eju5cm$jai$1@news4.fe.internet.bosch.com...
    > hello
    >
    > i have a problem with SCO Openserver 5.0.5.
    >
    > I add an 250 GB Harddisk to my System, the Bios detect it sucsessfully. In SCO i install
    > with mkdev hd 1 0 and it works.
    > Fdisk and divvy works.
    >
    > fdisk screen:
    >
    > Current Hard Disk Drive: /dev/rhd10
    >
    >
    > +-------------+----------+-----------+---------+---------+---------+
    > | Partition | Status | Type | Start | End | Size |
    >
    > +-------------+----------+-----------+---------+---------+---------+
    > | 1 | Active | UNIX | 1 | 7751999 | 7751999 |
    >
    > +-------------+----------+-----------+---------+---------+---------+
    >
    > Total disk size: 7752255 tracks (256 reserved for masterboot and diagnostics)
    >
    >
    >
    > divvy screen:
    >
    > +-------------------+------------+--------+---+-------------+------------+
    > | Name | Type | New FS | # | First Block | Last Block |
    > +-------------------+------------+--------+---+-------------+------------+
    > | platte2 | HTFS | no | 0 | 0| 244179966|
    > | | NOT USED | no | 1 | -| -|
    > | | NOT USED | no | 2 | -| -|
    > | | NOT USED | no | 3 | -| -|
    > | | NOT USED | no | 4 | -| -|
    > | | NOT USED | no | 5 | -| -|
    > | | NOT USED | no | 6 | -| -|
    > | d1157all | WHOLE DISK | no | 7 | 0| 244187967|
    > +-------------------+------------+--------+---+-------------+------------+
    > 244179967 1K blocks for divisions, 8001 1K blocks reserved for the system
    >
    > n[ame] Name or rename a division.
    > c[reate] Create a new file system on this division.
    > t[ype] Select or change filesystem type on new filesystems.
    > p[revent] Prevent a new file system from being created on this division.
    > s[tart] Start a division on a different block.
    > e[nd] End a division on a different block.
    > r[estore] Restore the original division table.
    >
    >
    >
    > but when i will mount the device with the Filesystem manager, takes very long time and
    > hanging up!
    >
    >
    >
    >
    > any ideas?!
    >
    >
    > Thanks


    http://wdb1.sco.com/kb/showta?taid=118463



  3. Re: cannot mount an 250 GB Harddisk to SCO 5.0.5


    >
    >
    > http://wdb1.sco.com/kb/showta?taid=118463
    >
    >


    Many thanks for the link!

+ Reply to Thread