building sendmail on unixware 2.1.3 - SCO

This is a discussion on building sendmail on unixware 2.1.3 - SCO ; downloaded sendmail 8.13.5, untarred it onto a unixware 2.1.3 system. can;t see anything helpful in devtools/OS so try to run (in directory sendmail) sh Build... but it errors with Configuration: pfx=, os=isv47dci, rel=4.2MP, rbase=4, rroot=4.2MP, arch=i386, sfx=, variant=optimized Cannot determine ...

+ Reply to Thread
Results 1 to 4 of 4

Thread: building sendmail on unixware 2.1.3

  1. building sendmail on unixware 2.1.3

    downloaded sendmail 8.13.5, untarred it onto a unixware 2.1.3 system.

    can;t see anything helpful in devtools/OS so try to run (in directory
    sendmail) sh Build... but it errors with

    Configuration: pfx=, os=isv47dci, rel=4.2MP, rbase=4, rroot=4.2MP,
    arch=i386, sfx=, variant=optimized
    Cannot determine how to support isv47dci.4.2MP.i386


    any ideas how to proceed?

    cheers

    ian


  2. Re: building sendmail on unixware 2.1.3

    Hi,

    didds schrieb:
    > downloaded sendmail 8.13.5, untarred it onto a unixware 2.1.3 system.
    >
    > can;t see anything helpful in devtools/OS so try to run (in directory
    > sendmail) sh Build... but it errors with



    http://www.oreilly.com/catalog/sendm...apter/ch02.pdf
    has some instructions

    >
    > Configuration: pfx=, os=isv47dci, rel=4.2MP, rbase=4, rroot=4.2MP,
    > arch=i386, sfx=, variant=optimized
    > Cannot determine how to support isv47dci.4.2MP.i386
    >
    >
    > any ideas how to proceed?
    >

    which compiler and m4 you're using?

    > cheers
    >
    > ian
    >


    Andreas

  3. Re: building sendmail on unixware 2.1.3

    didds wrote:
    > downloaded sendmail 8.13.5, untarred it onto a unixware 2.1.3 system.


    > can;t see anything helpful in devtools/OS so try to run (in directory
    > sendmail) sh Build... but it errors with


    > Configuration: pfx=, os=isv47dci, rel=4.2MP, rbase=4, rroot=4.2MP,


    unixware 2.1.3 uses those values?

    > arch=i386, sfx=, variant=optimized
    > Cannot determine how to support isv47dci.4.2MP.i386


    sendmail/README:

    Porting to a new Unix-based system should be a matter of creating
    an appropriate configuration file in the devtools/OS/ directory.

    > any ideas how to proceed?


    Use sendmail/README to check the available flags, see devtools/OS/ for
    an appropriate "template" (UnixWare.5.i386 might be a good start?),
    copy it over, change/try it until it works, send the file to
    sendmail.org for inclusing in the next release.

    --
    --
    Note: please read the netiquette before posting. I will almost never
    reply to top-postings which include a full copy of the previous
    article(s) at the end because it's annoying, shows that the poster

  4. Re: building sendmail on unixware 2.1.3


    > > Configuration: pfx=, os=isv47dci, rel=4.2MP, rbase=4, rroot=4.2MP,
    > > arch=i386, sfx=, variant=optimized
    > > Cannot determine how to support isv47dci.4.2MP.i386
    > >
    > >
    > > any ideas how to proceed?
    > >

    > which compiler and m4 you're using?



    sorry for the delay andreas...

    compiler :

    isv47dci:root - /tmp/sendmail-8.13.5/sendmail:>cc -V
    UX:cc: INFO: Optimizing C Compilation System (CCS) 3.0 04/27/98
    (u213_bl5)

    m4 :

    isv47dci:root - /tmp/sendmail-8.13.5/sendmail:>m4 -V
    UX:m4: INFO: Optimizing C Compilation System (CCS) 3.0 12/20/95
    (eiger8)
    isv47dci:root - /tmp/sendmail-8.13.5/sendmail:>which m4
    /usr/bin/m4


    cheers

    ian


+ Reply to Thread