change IP and network parameter - SCO

This is a discussion on change IP and network parameter - SCO ; I should change network parameter in an old computer with SCO UNIX (1997) I don't know SCO Unix (i know a little bit of linux) I should change IP (from 192.168.147.1 -> 192.168.0.13) gateway and nothing else .. How can ...

+ Reply to Thread
Results 1 to 4 of 4

Thread: change IP and network parameter

  1. change IP and network parameter

    I should change network parameter in an old computer with SCO UNIX
    (1997)
    I don't know SCO Unix (i know a little bit of linux)

    I should change IP (from 192.168.147.1 -> 192.168.0.13)
    gateway
    and nothing else ..


    How can i change this parameter ?
    /etc/hosts ??

    Thank you

  2. Re: change IP and network parameter

    PP wrote:
    > I should change network parameter in an old computer with SCO UNIX
    > (1997)
    > I don't know SCO Unix (i know a little bit of linux)
    >
    > I should change IP (from 192.168.147.1 -> 192.168.0.13)
    > gateway
    > and nothing else ..
    >
    >
    > How can i change this parameter ?
    > /etc/hosts ??
    >
    > Thank you


    What SCO version?

    Try:

    uname -X

    at the command prompt (thats a capital X).

    --
    ----------------------------------------------------
    Pat Welch, UBB Computer Services, a WCS Affiliate
    SCO Authorized Partner
    Microlite BackupEdge Certified Reseller
    Unix/Linux/Windows/Hardware Sales/Support
    (209) 745-1401 Cell: (209) 251-9120
    E-mail: patubb@inreach.com
    ----------------------------------------------------

  3. Re: change IP and network parameter

    Pat Welch typed (on Tue, Oct 14, 2008 at 11:22:14PM -0700):
    > PP wrote:
    >> I should change network parameter in an old computer with SCO UNIX
    >> (1997)
    >> I don't know SCO Unix (i know a little bit of linux)
    >>
    >> I should change IP (from 192.168.147.1 -> 192.168.0.13)
    >> gateway
    >> and nothing else ..
    >>
    >>
    >> How can i change this parameter ?
    >> /etc/hosts ??
    >>
    >> Thank you

    >
    > What SCO version?
    >
    > Try:
    >
    > uname -X
    >
    > at the command prompt (thats a capital X).


    Regardless of your SCO version: run "netconfig".

    --
    JP

  4. Re: change IP and network parameter

    On Oct 15, 11:47*am, Jean-Pierre Radley wrote:
    > Pat Welch typed (on Tue, Oct 14, 2008 at 11:22:14PM -0700):
    >
    >
    >
    > > PP wrote:
    > >> I should change network parameter in an old computer with SCO UNIX
    > >> (1997)
    > >> I don't know SCO Unix (i know a little bit of linux)

    >
    > >> I should change IP (from 192.168.147.1 -> 192.168.0.13)
    > >> gateway
    > >> and nothing else ..


    > Regardless of your SCO version: run "netconfig".


    Yeah, but is he asking how to change the ip or the gateway?

    And if he does just run netconfig, then the old ip will be left in /
    etc/hosts and that can cause Portmapper errors (see
    http://aplawrence.com/SCOFAQ/FAQ_scotec4portmapper.html ).

    Jeff L. wrote a detailed treatise on this a while back. I'm not sure
    if his site is still up (I couldn't reach it just now) but I have it
    at
    http://aplawrence.com/Jeffl/new_name.html

    If it WAS the gateway he wanted, see http://aplawrence.com/SCOFAQ/FAQ_sco...aultroute.html

    --
    Tony Lawrence
    Psst - wanna work for yourself?
    http://aplawrence.com/psst.html

+ Reply to Thread