This is a discussion on [Samba] Samba stalls - Samba ; Hi all, I have an HP Proliant 115 (Dual Core Opteron) server with 4GB of RAM set up as a PDC with an identical machine acting as BDC. The PDC has an LDAP backend and I'm planning to add an ...
I have an HP Proliant 115 (Dual Core Opteron) server with 4GB of RAM set
up as a PDC with an identical machine acting as BDC. The PDC has an LDAP
backend and I'm planning to add an LDAP slave on the BDC. Both are running
Redhat EL5 with Samba 3.0.28.
The problem I have though is that after a period of time, samba seems to
stall. Initially, I put it down to the Opteron dual core timing drift bug
as I was getting negative ping times but after updating Grub with the
relevant entry and rebooting, that was resolved. One of the member servers
on the domain loses touch with the DC's when they stall and will only
reconnect after Winbind is restarted.
I ran Gkrellm in daemon mode and found that the NIC has little if any load
on it and the CPU cores never get above 50%. The total amount of RAM in
use (including X11) is 191MB which seems remarkably good. When I
partitioned the drives, I set the system disk up with /var/lib/ldap as a
seperate partition to /var, and /var is where the action seems to be. Once
/var kicks into life, samba seems to stop responding to clients and if you
attempt to join a machine to the domain or carry out any other action that
requires authentication from the Domain Controller, it will often time
out. The data partition upon which everyone's home directories are stored
is a Terabyte RAID 5 array which hardy ever seems to get above 1-2 MB/s.
My question therefore is what could the DC be up to? Is it buffering up
and dumping the data to disk very slowly? Anyone else been here?
Thanks in advance,
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
To unsubscribe from this list go to the following URL and read the