[Samba] Re: samba Digest, Vol 64, Issue 25 - Samba

This is a discussion on [Samba] Re: samba Digest, Vol 64, Issue 25 - Samba ; > from windows i am trying to access like this > Go to Start menu -> run and type \\192.168.248.195, > now it will show the list of the samba folders > but when i double click on the folder ...

+ Reply to Thread
Results 1 to 3 of 3

Thread: [Samba] Re: samba Digest, Vol 64, Issue 25

  1. [Samba] Re: samba Digest, Vol 64, Issue 25

    > from windows i am trying to access like this
    > Go to Start menu -> run and type \\192.168.248.195,
    > now it will show the list of the samba folders
    > but when i double click on the folder it prompts
    > for username and passwd and when i enter
    > the samba username and passwd it will popup
    > "Cannot be accessed u might now have permissions to access this"


    There are usually some registry changes required for an XP
    to connect to a Samba server. I use this:

    Windows Registry Editor Version 5.00

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Netlogon\Parameters
    requiresignorseal = REG_DWORD 0x00000000
    signsecurechannel = REG_DWORD 0x00000000
    --
    To unsubscribe from this list go to the following URL and read the
    instructions: https://lists.samba.org/mailman/listinfo/samba

  2. [Samba] Re: samba Digest, Vol 64, Issue 25

    Thanks for the reply Dragan Krnic,
    i made the changes into the registry as you told but even still the same
    problem persists... ( earlier the values were 1 i made it zero as told
    by you..






    "Dragan Krnic"
    04/25/2008 08:10 PM

    To
    narendra.ka@lntemsys.com
    cc
    samba@lists.samba.org
    Subject
    Re: samba Digest, Vol 64, Issue 25






    > from windows i am trying to access like this
    > Go to Start menu -> run and type \\192.168.248.195,
    > now it will show the list of the samba folders
    > but when i double click on the folder it prompts
    > for username and passwd and when i enter
    > the samba username and passwd it will popup
    > "Cannot be accessed u might now have permissions to access this"


    There are usually some registry changes required for an XP
    to connect to a Samba server. I use this:

    Windows Registry Editor Version 5.00

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Netlogon\Parameters
    requiresignorseal = REG_DWORD 0x00000000
    signsecurechannel = REG_DWORD 0x00000000

    --
    To unsubscribe from this list go to the following URL and read the
    instructions: https://lists.samba.org/mailman/listinfo/samba

  3. Re: [Samba] Re: samba Digest, Vol 64, Issue 25

    On 4/28/2008, Narendra KA (Narendra.KA@Lntemsys.com) wrote:
    > There are usually some registry changes required for an XP
    > to connect to a Samba server. I use this:
    >
    > Windows Registry Editor Version 5.00
    >
    > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Netlogon\Parameters
    > requiresignorseal = REG_DWORD 0x00000000
    > signsecurechannel = REG_DWORD 0x00000000


    Actually, these haven't been required for quite some time...

    --

    Best regards,

    Charles
    --
    To unsubscribe from this list go to the following URL and read the
    instructions: https://lists.samba.org/mailman/listinfo/samba

+ Reply to Thread