[Samba] listing groups not working - Samba

This is a discussion on [Samba] listing groups not working - Samba ; Im having some problems with the samba 3.0.24 in Debian Etch when I try to list the groups, like this: wbinfo -g or net rpc group -U username All the times the output of the command is... "NOTHING". In samba ...

+ Reply to Thread
Results 1 to 6 of 6

Thread: [Samba] listing groups not working

  1. [Samba] listing groups not working

    Im having some problems with the samba 3.0.24 in Debian Etch when I try to
    list the groups, like this:

    wbinfo -g

    or

    net rpc group -U username

    All the times the output of the command is... "NOTHING".

    In samba 3.0.14 (Sarge), this works OK.
    I don't try in a newer version of samba.

    I test this with the debug on -d 4 with the rpc command and this is the
    ouput (see attached files).

    The winbind package is not the problem, coz if I try from a client that
    dosen't have the winbind package, the same thing happends.

    Tnxs in advance.

    Sorry for my english. I never study.
    --
    To unsubscribe from this list go to the following URL and read the
    instructions: https://lists.samba.org/mailman/listinfo/samba

  2. [Samba] Recycle Module

    Does anybody have an example config file with the "Recycle" VSF
    module loaded and working ?
    If so, would you please give me a peek at it ?

    I've been playing with this thing for days (off & on) and don't seem
    to have it working yet. Can anybody share some knowledge on this ?


    Thanks in advance,
    Cary Robinson


    --
    No virus found in this outgoing message.
    Checked by AVG.
    Version: 7.5.472 / Virus Database: 269.9.1/857 - Release Date: 6/20/2007 2:18 PM


    --
    To unsubscribe from this list go to the following URL and read the
    instructions: https://lists.samba.org/mailman/listinfo/samba

  3. Re: [Samba] Recycle Module

    Greeting Cary,

    Recycle bin on network work great. First create a .recycle directory
    (directly in the share directory for your test).

    cd
    mkdir .recycle
    chown root:root .recycle
    setfacl -m groupomainUsers:rwx .recycle

    As you can see I use ACL(EA) on my filesystem. If you create this
    repository directely in the share add the following parameter at your share.

    /veto files = /.recycle//


    Here the parameters to add at the end of the share parameters.

    [share]
    ...
    Enter your share parameters here.
    ...
    vfs objects = recycle
    recycle:repository =.recycle/%u
    recycle:keeptree = yes
    recycle:exclude = *.tmp *.temp
    recycle:exclude_dir = /tmp /temp /cache
    recycle:versions = yes
    recycle:noversion = *.doc *.xls *.ppt

    I like to add tmpwatch script to empty recycle after a period of time
    when the file was deleted. You can find this script at
    http://download.fedora.redhat.com/pu...386/os/Fedora/.
    I use this on Gentoo.

    Create a bash file and add the following command (168 represent a week
    in hours).

    /usr/sbin/tmpwatch -u 168 //.recycle

    Just add this script in the crontab and enjoy :-)

    Robert

    --
    Cybionet - Solution reseautique
    http://www.cybionet.com

    --
    To unsubscribe from this list go to the following URL and read the
    instructions: https://lists.samba.org/mailman/listinfo/samba

  4. [Samba] Re: listing groups not working

    To add a little more..


    amayo-fs2:/etc/samba# net rpc info -U glorenzutti
    Password:
    Domain Name: JUSBAIRES
    Domain SID: S-1-5-21-2281447165-45835457-3575675572
    Sequence number: 1182389270
    Num users: 1725
    Num domain groups: 0
    Num local groups: 0
    amayo-fs2:/etc/samba#


    And with debug output...

    amayo-fs2:/etc/samba# net -d 4 rpc info -U glorenzutti
    [2007/06/20 22:27:27, 3] param/loadparm.c:lp_load(4953)
    lp_load: refreshing parameters
    [2007/06/20 22:27:27, 3] param/loadparm.c:init_globals(1418)
    Initialising global parameters
    [2007/06/20 22:27:27, 3] param/params.cm_process(572)
    params.cm_process() - Processing configuration file
    "/etc/samba/smb.conf"
    [2007/06/20 22:27:27, 3] param/loadparm.c:do_section(3695)
    Processing section "[global]"
    doing parameter workgroup = JUSBAIRES
    doing parameter netbios name = BDCAMAYO
    [2007/06/20 22:27:27, 4] param/loadparm.c:handle_netbios_name(3053)
    handle_netbios_name: set global_myname to: BDCAMAYO
    doing parameter netbios aliases = SERVER
    doing parameter server string =
    doing parameter debug level = 0
    doing parameter syslog = 0
    doing parameter log level = 0
    doing parameter log file = /var/log/samba/%m.%U.log
    doing parameter max log size = 5000
    doing parameter panic action = /usr/share/samba/panic-action %d
    doing parameter name resolve order = wins hosts lmhosts bcast
    doing parameter socket options = TCP_NODELAY SO_RCVBUF=8192
    SO_SNDBUF=8192 IPTOS_LOWDELAY SO_KEEPALIVE
    doing parameter use sendfile = yes
    doing parameter wins support = yes
    doing parameter wins proxy = yes
    doing parameter enhanced browsing = yes
    doing parameter dns proxy = yes
    doing parameter time server = yes
    doing parameter smb ports = 139
    doing parameter add user script = /usr/sbin/smbldap-useradd -a %u
    doing parameter delete user script = /usr/sbin/smbldap-userdel "%u"
    doing parameter add machine script = /usr/sbin/smbldap-useradd -w "%u"
    doing parameter add group script = /usr/sbin/smbldap-groupadd -p "%g"
    doing parameter delete group script = /usr/sbin/smbldap-groupdel "%g"
    doing parameter add user to group script = /usr/sbin/smbldap-groupmod
    -m "%u" "%g"
    doing parameter delete user from group script =
    /usr/sbin/smbldap-groupmod -x "%u" "%g"
    doing parameter set primary group script = /usr/sbin/smbldap-usermod
    -g "%g" "%u"
    doing parameter ldap admin dn =
    uid=amayo-fs2,ou=security,dc=jusbaires,dc=gov,dc=ar
    doing parameter ldap suffix = dc=jusbaires,dc=gov,dc=ar
    doing parameter ldap group suffix = ou=Group
    doing parameter ldap user suffix = ou=People
    doing parameter ldap machine suffix = ou=amayo,ou=Computers
    doing parameter ldap ssl = on
    doing parameter ldap delete dn = yes
    doing parameter ldap passwd sync = yes
    doing parameter printcap name = /dev/null
    doing parameter printing = bsd
    doing parameter load printers = no
    doing parameter admin users = administrador mchamorro mlopez gpanizzo
    glorenzutti
    doing parameter enable privileges = yes
    doing parameter os level = 80
    doing parameter preferred master = yes
    doing parameter lm announce = yes
    doing parameter domain master = yes
    doing parameter domain logons = yes
    doing parameter encrypt passwords = yes
    doing parameter pam password change = yes
    doing parameter passdb backend =
    ldapsam:"ldap://amayo-fs2.jusbaires.gov.ar
    ldap://alem-cups.jusbaires.gov.ar ldap://alem-systemlog.jusbaires.gov.ar"
    doing parameter passwd chat debug = no
    doing parameter check password script = /usr/local/bin/crackcheck -d
    /var/cache/cracklib/cracklib_dict
    doing parameter unix charset = 850
    doing parameter dont descend = .recycle
    doing parameter delete veto files = yes
    doing parameter restrict anonymous = 1
    doing parameter logon script = netlogon.%U.bat
    doing parameter logon path = \\server\profiles\%U
    doing parameter logon home = \\server\profiles\%U
    doing parameter logon drive = C:
    doing parameter hide files = /Desktop.ini/desktop.ini/
    doing parameter hide dot files = yes
    doing parameter include = /etc/samba/default_shares.smb.conf
    [2007/06/20 22:27:27, 3] param/params.cm_process(572)
    params.cm_process() - Processing configuration file
    "/etc/samba/default_shares.smb.conf"
    [2007/06/20 22:27:27, 4] param/loadparm.c:lp_load(4984)
    pm_process() returned Yes
    [2007/06/20 22:27:27, 2] lib/interface.c:add_interface(81)
    added interface ip=10.2.0.2 bcast=10.2.255.255 nmask=255.255.0.0
    Password:
    [2007/06/20 22:27:29, 3] libsmb/cliconnect.c:cli_start_connection(1426)
    Connecting to host=BDCAMAYO
    [2007/06/20 22:27:29, 3] lib/util_sock.cpen_socket_out(874)
    Connecting to 10.2.0.2 at port 445
    [2007/06/20 22:27:29, 2] lib/util_sock.cpen_socket_out(911)
    error connecting to 10.2.0.2:445 (Connection refused)
    [2007/06/20 22:27:29, 3] lib/util_sock.cpen_socket_out(874)
    Connecting to 10.2.0.2 at port 139
    [2007/06/20 22:27:29, 3] libsmb/cliconnect.c:cli_session_setup_spnego(721)
    Doing spnego session setup (blob length=58)
    [2007/06/20 22:27:29, 3] libsmb/cliconnect.c:cli_session_setup_spnego(746)
    got OID=1 3 6 1 4 1 311 2 2 10
    [2007/06/20 22:27:29, 3] libsmb/cliconnect.c:cli_session_setup_spnego(754)
    got principal=NONE
    [2007/06/20 22:27:29, 3] libsmb/ntlmssp.c:ntlmssp_client_challenge(950)
    Got challenge flags:
    [2007/06/20 22:27:29, 3] libsmb/ntlmssp.c:debug_ntlmssp_flags(63)
    Got NTLMSSP neg_flags=0x60890215
    NTLMSSP_NEGOTIATE_UNICODE
    NTLMSSP_REQUEST_TARGET
    NTLMSSP_NEGOTIATE_SIGN
    NTLMSSP_NEGOTIATE_NTLM
    NTLMSSP_NEGOTIATE_NTLM2
    NTLMSSP_CHAL_TARGET_INFO
    NTLMSSP_NEGOTIATE_128
    NTLMSSP_NEGOTIATE_KEY_EXCH
    [2007/06/20 22:27:29, 3] libsmb/ntlmssp.c:ntlmssp_client_challenge(972)
    NTLMSSP: Set final flags:
    [2007/06/20 22:27:29, 3] libsmb/ntlmssp.c:debug_ntlmssp_flags(63)
    Got NTLMSSP neg_flags=0x60080215
    NTLMSSP_NEGOTIATE_UNICODE
    NTLMSSP_REQUEST_TARGET
    NTLMSSP_NEGOTIATE_SIGN
    NTLMSSP_NEGOTIATE_NTLM
    NTLMSSP_NEGOTIATE_NTLM2
    NTLMSSP_NEGOTIATE_128
    NTLMSSP_NEGOTIATE_KEY_EXCH
    [2007/06/20 22:27:29, 3] libsmb/ntlmssp_sign.c:ntlmssp_sign_init(338)
    NTLMSSP Sign/Seal - Initialising with flags:
    [2007/06/20 22:27:29, 3] libsmb/ntlmssp.c:debug_ntlmssp_flags(63)
    Got NTLMSSP neg_flags=0x60080215
    NTLMSSP_NEGOTIATE_UNICODE
    NTLMSSP_REQUEST_TARGET
    NTLMSSP_NEGOTIATE_SIGN
    NTLMSSP_NEGOTIATE_NTLM
    NTLMSSP_NEGOTIATE_NTLM2
    NTLMSSP_NEGOTIATE_128
    NTLMSSP_NEGOTIATE_KEY_EXCH
    [2007/06/20 22:27:30, 3] rpc_client/cli_pipe.c:rpc_pipe_bind(2081)
    rpc_pipe_bind: Remote machine BDCAMAYO pipe \lsarpc fnum 0x7405 bind
    request returned ok.
    [2007/06/20 22:27:30, 3] rpc_client/cli_pipe.c:rpc_pipe_bind(2081)
    rpc_pipe_bind: Remote machine BDCAMAYO pipe \samr fnum 0x7406 bind
    request returned ok.
    Domain Name: JUSBAIRES
    Domain SID: S-1-5-21-2281447165-45835457-3575675572
    Sequence number: 1182389251
    Num users: 1725
    Num domain groups: 0
    Num local groups: 0
    [2007/06/20 22:27:31, 2] utils/net.c:main(988)
    return code = 0

    The same thing with samba 3.0.14 works just fine.
    Any ideas? Any clue? The people are starting to give me copies of
    windows 2003!!!

    Tnxs in advance.


    guido.lorenzutti.com.ar@presencia.net wrote:
    > Im having some problems with the samba 3.0.24 in Debian Etch when I try to
    > list the groups, like this:
    >
    > wbinfo -g
    >
    > or
    >
    > net rpc group -U username
    >
    > All the times the output of the command is... "NOTHING".
    >
    > In samba 3.0.14 (Sarge), this works OK.
    > I don't try in a newer version of samba.
    >
    > I test this with the debug on -d 4 with the rpc command and this is the
    > ouput (see attached files).
    >
    > The winbind package is not the problem, coz if I try from a client that
    > dosen't have the winbind package, the same thing happends.
    >
    > Tnxs in advance.
    >
    > Sorry for my english. I never study.


    --
    To unsubscribe from this list go to the following URL and read the
    instructions: https://lists.samba.org/mailman/listinfo/samba

  5. Re: [Samba] Recycle Module

    Robert,
    Thank you VERY much.
    I won't be able to test it until later today when the office clears
    out, but Your example has shown me a lot that wasn't mentioned in the
    book I bought or on any web site I have found. I'll have a lot more
    enthusiasm when I try you examples later today.

    Thanks again,
    Cary Robinson

    At 07:44 PM 6/20/2007, Cybionet wrote:

    >Greeting Cary,
    >
    > Recycle bin on network work great. First create a .recycle
    > directory (directly in the share directory for your test).
    >
    >cd
    >mkdir .recycle
    >chown root:root .recycle
    >setfacl -m groupomainUsers:rwx .recycle
    >
    > As you can see I use ACL(EA) on my filesystem. If you create this
    > repository directely in the share add the following parameter at your share.
    >
    >/veto files = /.recycle//
    >
    >
    > Here the parameters to add at the end of the share parameters.
    >
    >[share]
    > ...
    > Enter your share parameters here.
    > ...
    > vfs objects = recycle
    > recycle:repository =.recycle/%u
    > recycle:keeptree = yes
    > recycle:exclude = *.tmp *.temp
    > recycle:exclude_dir = /tmp /temp /cache
    > recycle:versions = yes
    > recycle:noversion = *.doc *.xls *.ppt
    >
    > I like to add tmpwatch script to empty recycle after a period of
    > time when the file was deleted. You can find this script at
    > http://download.fedora.redhat.com/pu...386/os/Fedora/.
    > I use this on Gentoo.
    >
    >Create a bash file and add the following command (168 represent a
    >week in hours).
    >
    >/usr/sbin/tmpwatch -u 168 //.recycle
    >
    >Just add this script in the crontab and enjoy :-)
    >
    >Robert
    >
    >--
    >Cybionet - Solution reseautique
    >http://www.cybionet.com
    >
    >--
    >To unsubscribe from this list go to the following URL and read the
    >instructions: https://lists.samba.org/mailman/listinfo/samba
    >
    >
    >
    >--
    >No virus found in this incoming message.
    >Checked by AVG. Version: 7.5.472 / Virus Database: 269.9.1/857 -
    >Release Date: 6/20/2007 2:18 PM


    --
    To unsubscribe from this list go to the following URL and read the
    instructions: https://lists.samba.org/mailman/listinfo/samba

  6. Re: [Samba] Re: listing groups not working

    Guido,

    There were major changes starting in 3.0.23, including the samba schema
    in ldap _and_ group mapping. Etch is at 3.0.24 One or more of these
    changes is probably causing your problems. If you haven't already read
    the change notes, you should do that now.

    Release Notes

    http://us3.samba.org/samba/docs/man/...angeNotes.html

    Good luck,

    Dale

    Guido Lorenzutti wrote:
    > To add a little more..
    >
    >
    > amayo-fs2:/etc/samba# net rpc info -U glorenzutti
    > Password:
    > Domain Name: JUSBAIRES
    > Domain SID: S-1-5-21-2281447165-45835457-3575675572
    > Sequence number: 1182389270
    > Num users: 1725
    > Num domain groups: 0
    > Num local groups: 0
    > amayo-fs2:/etc/samba#
    >
    >
    > And with debug output...
    >
    > amayo-fs2:/etc/samba# net -d 4 rpc info -U glorenzutti
    > [2007/06/20 22:27:27, 3] param/loadparm.c:lp_load(4953)
    > lp_load: refreshing parameters
    > [2007/06/20 22:27:27, 3] param/loadparm.c:init_globals(1418)
    > Initialising global parameters
    > [2007/06/20 22:27:27, 3] param/params.cm_process(572)
    > params.cm_process() - Processing configuration file
    > "/etc/samba/smb.conf"
    > [2007/06/20 22:27:27, 3] param/loadparm.c:do_section(3695)
    > Processing section "[global]"
    > doing parameter workgroup = JUSBAIRES
    > doing parameter netbios name = BDCAMAYO
    > [2007/06/20 22:27:27, 4] param/loadparm.c:handle_netbios_name(3053)
    > handle_netbios_name: set global_myname to: BDCAMAYO
    > doing parameter netbios aliases = SERVER
    > doing parameter server string =
    > doing parameter debug level = 0
    > doing parameter syslog = 0
    > doing parameter log level = 0
    > doing parameter log file = /var/log/samba/%m.%U.log
    > doing parameter max log size = 5000
    > doing parameter panic action = /usr/share/samba/panic-action %d
    > doing parameter name resolve order = wins hosts lmhosts bcast
    > doing parameter socket options = TCP_NODELAY SO_RCVBUF=8192
    > SO_SNDBUF=8192 IPTOS_LOWDELAY SO_KEEPALIVE
    > doing parameter use sendfile = yes
    > doing parameter wins support = yes
    > doing parameter wins proxy = yes
    > doing parameter enhanced browsing = yes
    > doing parameter dns proxy = yes
    > doing parameter time server = yes
    > doing parameter smb ports = 139
    > doing parameter add user script = /usr/sbin/smbldap-useradd -a %u
    > doing parameter delete user script = /usr/sbin/smbldap-userdel "%u"
    > doing parameter add machine script = /usr/sbin/smbldap-useradd -w "%u"
    > doing parameter add group script = /usr/sbin/smbldap-groupadd -p "%g"
    > doing parameter delete group script = /usr/sbin/smbldap-groupdel "%g"
    > doing parameter add user to group script = /usr/sbin/smbldap-groupmod
    > -m "%u" "%g"
    > doing parameter delete user from group script =
    > /usr/sbin/smbldap-groupmod -x "%u" "%g"
    > doing parameter set primary group script = /usr/sbin/smbldap-usermod
    > -g "%g" "%u"
    > doing parameter ldap admin dn =
    > uid=amayo-fs2,ou=security,dc=jusbaires,dc=gov,dc=ar
    > doing parameter ldap suffix = dc=jusbaires,dc=gov,dc=ar
    > doing parameter ldap group suffix = ou=Group
    > doing parameter ldap user suffix = ou=People
    > doing parameter ldap machine suffix = ou=amayo,ou=Computers
    > doing parameter ldap ssl = on
    > doing parameter ldap delete dn = yes
    > doing parameter ldap passwd sync = yes
    > doing parameter printcap name = /dev/null
    > doing parameter printing = bsd
    > doing parameter load printers = no
    > doing parameter admin users = administrador mchamorro mlopez gpanizzo
    > glorenzutti
    > doing parameter enable privileges = yes
    > doing parameter os level = 80
    > doing parameter preferred master = yes
    > doing parameter lm announce = yes
    > doing parameter domain master = yes
    > doing parameter domain logons = yes
    > doing parameter encrypt passwords = yes
    > doing parameter pam password change = yes
    > doing parameter passdb backend =
    > ldapsam:"ldap://amayo-fs2.jusbaires.gov.ar
    > ldap://alem-cups.jusbaires.gov.ar ldap://alem-systemlog.jusbaires.gov.ar"
    > doing parameter passwd chat debug = no
    > doing parameter check password script = /usr/local/bin/crackcheck -d
    > /var/cache/cracklib/cracklib_dict
    > doing parameter unix charset = 850
    > doing parameter dont descend = .recycle
    > doing parameter delete veto files = yes
    > doing parameter restrict anonymous = 1
    > doing parameter logon script = netlogon.%U.bat
    > doing parameter logon path = \\server\profiles\%U
    > doing parameter logon home = \\server\profiles\%U
    > doing parameter logon drive = C:
    > doing parameter hide files = /Desktop.ini/desktop.ini/
    > doing parameter hide dot files = yes
    > doing parameter include = /etc/samba/default_shares.smb.conf
    > [2007/06/20 22:27:27, 3] param/params.cm_process(572)
    > params.cm_process() - Processing configuration file
    > "/etc/samba/default_shares.smb.conf"
    > [2007/06/20 22:27:27, 4] param/loadparm.c:lp_load(4984)
    > pm_process() returned Yes
    > [2007/06/20 22:27:27, 2] lib/interface.c:add_interface(81)
    > added interface ip=10.2.0.2 bcast=10.2.255.255 nmask=255.255.0.0
    > Password:
    > [2007/06/20 22:27:29, 3] libsmb/cliconnect.c:cli_start_connection(1426)
    > Connecting to host=BDCAMAYO
    > [2007/06/20 22:27:29, 3] lib/util_sock.cpen_socket_out(874)
    > Connecting to 10.2.0.2 at port 445
    > [2007/06/20 22:27:29, 2] lib/util_sock.cpen_socket_out(911)
    > error connecting to 10.2.0.2:445 (Connection refused)
    > [2007/06/20 22:27:29, 3] lib/util_sock.cpen_socket_out(874)
    > Connecting to 10.2.0.2 at port 139
    > [2007/06/20 22:27:29, 3] libsmb/cliconnect.c:cli_session_setup_spnego(721)
    > Doing spnego session setup (blob length=58)
    > [2007/06/20 22:27:29, 3] libsmb/cliconnect.c:cli_session_setup_spnego(746)
    > got OID=1 3 6 1 4 1 311 2 2 10
    > [2007/06/20 22:27:29, 3] libsmb/cliconnect.c:cli_session_setup_spnego(754)
    > got principal=NONE
    > [2007/06/20 22:27:29, 3] libsmb/ntlmssp.c:ntlmssp_client_challenge(950)
    > Got challenge flags:
    > [2007/06/20 22:27:29, 3] libsmb/ntlmssp.c:debug_ntlmssp_flags(63)
    > Got NTLMSSP neg_flags=0x60890215
    > NTLMSSP_NEGOTIATE_UNICODE
    > NTLMSSP_REQUEST_TARGET
    > NTLMSSP_NEGOTIATE_SIGN
    > NTLMSSP_NEGOTIATE_NTLM
    > NTLMSSP_NEGOTIATE_NTLM2
    > NTLMSSP_CHAL_TARGET_INFO
    > NTLMSSP_NEGOTIATE_128
    > NTLMSSP_NEGOTIATE_KEY_EXCH
    > [2007/06/20 22:27:29, 3] libsmb/ntlmssp.c:ntlmssp_client_challenge(972)
    > NTLMSSP: Set final flags:
    > [2007/06/20 22:27:29, 3] libsmb/ntlmssp.c:debug_ntlmssp_flags(63)
    > Got NTLMSSP neg_flags=0x60080215
    > NTLMSSP_NEGOTIATE_UNICODE
    > NTLMSSP_REQUEST_TARGET
    > NTLMSSP_NEGOTIATE_SIGN
    > NTLMSSP_NEGOTIATE_NTLM
    > NTLMSSP_NEGOTIATE_NTLM2
    > NTLMSSP_NEGOTIATE_128
    > NTLMSSP_NEGOTIATE_KEY_EXCH
    > [2007/06/20 22:27:29, 3] libsmb/ntlmssp_sign.c:ntlmssp_sign_init(338)
    > NTLMSSP Sign/Seal - Initialising with flags:
    > [2007/06/20 22:27:29, 3] libsmb/ntlmssp.c:debug_ntlmssp_flags(63)
    > Got NTLMSSP neg_flags=0x60080215
    > NTLMSSP_NEGOTIATE_UNICODE
    > NTLMSSP_REQUEST_TARGET
    > NTLMSSP_NEGOTIATE_SIGN
    > NTLMSSP_NEGOTIATE_NTLM
    > NTLMSSP_NEGOTIATE_NTLM2
    > NTLMSSP_NEGOTIATE_128
    > NTLMSSP_NEGOTIATE_KEY_EXCH
    > [2007/06/20 22:27:30, 3] rpc_client/cli_pipe.c:rpc_pipe_bind(2081)
    > rpc_pipe_bind: Remote machine BDCAMAYO pipe \lsarpc fnum 0x7405 bind
    > request returned ok.
    > [2007/06/20 22:27:30, 3] rpc_client/cli_pipe.c:rpc_pipe_bind(2081)
    > rpc_pipe_bind: Remote machine BDCAMAYO pipe \samr fnum 0x7406 bind
    > request returned ok.
    > Domain Name: JUSBAIRES
    > Domain SID: S-1-5-21-2281447165-45835457-3575675572
    > Sequence number: 1182389251
    > Num users: 1725
    > Num domain groups: 0
    > Num local groups: 0
    > [2007/06/20 22:27:31, 2] utils/net.c:main(988)
    > return code = 0
    >
    > The same thing with samba 3.0.14 works just fine.
    > Any ideas? Any clue? The people are starting to give me copies of
    > windows 2003!!!
    >
    > Tnxs in advance.
    >
    >
    > guido.lorenzutti.com.ar@presencia.net wrote:
    >
    >> Im having some problems with the samba 3.0.24 in Debian Etch when I try to
    >> list the groups, like this:
    >>
    >> wbinfo -g
    >>
    >> or
    >>
    >> net rpc group -U username
    >>
    >> All the times the output of the command is... "NOTHING".
    >>
    >> In samba 3.0.14 (Sarge), this works OK.
    >> I don't try in a newer version of samba.
    >>
    >> I test this with the debug on -d 4 with the rpc command and this is the
    >> ouput (see attached files).
    >>
    >> The winbind package is not the problem, coz if I try from a client that
    >> dosen't have the winbind package, the same thing happends.
    >>
    >> Tnxs in advance.
    >>
    >> Sorry for my english. I never study.
    >>

    >
    >

    --
    To unsubscribe from this list go to the following URL and read the
    instructions: https://lists.samba.org/mailman/listinfo/samba

+ Reply to Thread