Setting NAT on XP computer ?
Which netsh NAT commands must I enter on my "XP SP2 router" to NAT my LAN
over Internet ?
I have :
- a Windows 98 client,
- a XP SP2 computer operating as a server (setting to 1 his IpEnableRouter
registry key is done")
- an ADSL Ethernet modem provided by my internet provider. This modem is
also set as a router
On the W98 client :
The ip address of this client is forced to 192.168.1.13 / 255.255.255.0
The default gateway of this client is forced to 192.168.1.1
On the XP router :
The LAN interface ip address of the XP router is forced to 192.168.1.1 /
The WAN interface ip address of the XP router is set to 192.168.0.2 /
The default gateway of this XP router is set to the modem ip address
On the modem :
The ip address of the modem is 192.168.0.254 for his internal segment
The ip address of the modem external segment is set by the Provider DHCP
Witch exactly "netsh routing ip nat" commands must I do on my XP router ?
Netsh routing ip nat install
Netsh routing ip nat add interface WHAT ?
Netsh routing ip nat add addressrange WHAT ?
Netsh routing ip nat add addressmapping WHAT ?
Without a correct NAT setting on the Xp router, here are the results of the
on the W98 client:
Ping 192.168.1.1 => ok
Ping 192.168.0.2 => ok
Ping 192.168.0.254 => 100% packet lost
Thanks in advance,