W2k Server - 2 NIC's - RASS - Routers

This is a discussion on W2k Server - 2 NIC's - RASS - Routers ; Hi All, You are all my lost hope (after 2 days troubleshouting without succes) My Situation: W2k Server with Routing and Remote Access Configered 2 Networkcards with following config: IP: 192.168.1.4 Mask: 255.255.255.0 Gateway: 192.168.1.1 IP: 192.168.2.4 Mask: 255.255.255.0 Gateway: ...

+ Reply to Thread
Results 1 to 6 of 6

Thread: W2k Server - 2 NIC's - RASS

  1. W2k Server - 2 NIC's - RASS

    Hi All,

    You are all my lost hope (after 2 days troubleshouting without succes)

    My Situation:
    W2k Server with Routing and Remote Access Configered
    2 Networkcards with following config:
    IP: 192.168.1.4
    Mask: 255.255.255.0
    Gateway: 192.168.1.1

    IP: 192.168.2.4
    Mask: 255.255.255.0
    Gateway: 192.168.2.1

    192.168.1.4 == Is Connected to a Router 192.168.1.1
    192.168.2.4 == Is Connected to a Router (AccessPoint) 192.168.2.1

    From the Network 192.168.1.x : I can access everything normall but not
    Network 192.168.2.x
    And the same thing for 192.168.2.x


    Can someone explain how RASS needs to be properly setup for my network?


    Additional Info:
    Output "Route Print" W2k Server
    ================================================== =========================
    Interface List
    0x1 ........................... MS TCP Loopback interface
    0x2 ...00 80 c8 2d 33 f2 ...... D-Link AirPlus Wireless Adapter
    0x3 ...00 d0 b7 bd c5 92 ...... Intel(R) PRO Adapter
    ================================================== =========================
    ================================================== =========================
    Active Routes:
    Network Destination Netmask Gateway Interface
    Metric
    0.0.0.0 0.0.0.0 192.168.1.1
    192.168.1.4 1
    127.0.0.0 255.0.0.0 127.0.0.1
    127.0.0.1 1
    192.168.1.0 255.255.255.0 192.168.1.4 192.168.1.4
    1
    192.168.1.4 255.255.255.255 127.0.0.1 127.0.0.1
    1
    192.168.1.255 255.255.255.255 192.168.1.4 192.168.1.4
    1
    192.168.2.0 255.255.255.0 192.168.2.4 192.168.2.4
    1
    192.168.2.4 255.255.255.255 127.0.0.1 127.0.0.1
    1
    192.168.2.255 255.255.255.255 192.168.2.4 192.168.2.4
    1
    224.0.0.0 224.0.0.0 192.168.1.4
    192.168.1.4 1
    224.0.0.0 224.0.0.0 192.168.2.4
    192.168.2.4 1
    255.255.255.255 255.255.255.255 192.168.1.4 192.168.1.4
    1
    Default Gateway: 192.168.1.1
    ================================================== =========================
    Persistent Routes:
    None




  2. Re: W2k Server - 2 NIC's - RASS

    > W2k Server with Routing and Remote Access Configered
    > 2 Networkcards with following config:
    > IP: 192.168.1.4
    > Mask: 255.255.255.0
    > Gateway: 192.168.1.1
    >
    > IP: 192.168.2.4
    > Mask: 255.255.255.0
    > Gateway: 192.168.2.1


    What is with this second gateway? I think that Windows 2000 can only use
    a second default gateway for failover.

    > 192.168.2.4 == Is Connected to a Router (AccessPoint) 192.168.2.1


    Is this a router or an access point and how is it connected to the
    network? What physical ports are connected to what?

  3. Re: W2k Server - 2 NIC's - RASS

    I don't know what setting i need, however the second gateway is based onto
    this article: http://support.microsoft.com/?kbid=178993#E0YB0ABAAA

    192.168.2.4 is a belkin router configured as a AP, it has 4 network
    connections (=switch) and one wan connection, only the network connections
    are used.



    "Dom" schreef in bericht
    news:44247500$0$16007$892e7fe2@authen.yellow.readf reenews.net...
    >> W2k Server with Routing and Remote Access Configered
    >> 2 Networkcards with following config:
    >> IP: 192.168.1.4
    >> Mask: 255.255.255.0
    >> Gateway: 192.168.1.1
    >>
    >> IP: 192.168.2.4
    >> Mask: 255.255.255.0
    >> Gateway: 192.168.2.1

    >
    > What is with this second gateway? I think that Windows 2000 can only use a
    > second default gateway for failover.
    >
    >> 192.168.2.4 == Is Connected to a Router (AccessPoint) 192.168.2.1

    >
    > Is this a router or an access point and how is it connected to the
    > network? What physical ports are connected to what?




  4. Re: W2k Server - 2 NIC's - RASS

    > the second gateway is based onto
    > this article: http://support.microsoft.com/?kbid=178993#E0YB0ABAAA


    I don't see where the article says anything about a second gateway.
    Perhaps you could quote the passage.

    > 192.168.2.4 is a belkin router configured as a AP, it has 4 network
    > connections (=switch) and one wan connection, only the network connections
    > are used.


    Below I quote you as saying that a RRAS server NIC is configured with
    192.168.2.4, so let's resolve that point. You say you are only using LAN
    ports on the Belkin, so that is correct. DHCP is disabled on the Belkin?

    >>> W2k Server with Routing and Remote Access Configered
    >>> 2 Networkcards with following config:
    >>> IP: 192.168.1.4
    >>> Mask: 255.255.255.0
    >>> Gateway: 192.168.1.1
    >>>
    >>> IP: 192.168.2.4
    >>> Mask: 255.255.255.0
    >>> Gateway: 192.168.2.1


    Let's have a look at some host configurations. Ipconfig/all the server
    and any hosts that are not functioning properly. Also, let's have a look
    at the routing table from the device at 192.168.1.1.

  5. Re: W2k Server - 2 NIC's - RASS

    Indeed, I made a typo yesterday.

    What I have is:
    http://support.microsoft.com/?kbid=178993#E0YB0ABAAA
    Scenario Three: A LAN-to-LAN Environment with Multiple Routers
    (The article says: Notice in this scenario that the IP configurations of the
    RRAS NICs have default gateways configured.)

    Next I will Provide you a complete list with details for my equipment:
    ---------------------------------------------------------------------------
    W2k Server with Routing and Remote Access Configered
    2 Networkcards with following config:
    IP: 192.168.1.4 (Wireless Network Card)
    Mask: 255.255.255.0
    Gateway: 192.168.1.1

    IP: 192.168.2.4
    Mask: 255.255.255.0
    Gateway: 192.168.2.1
    ---------------------------------
    IpConfig/All (Notice here Lan-2 displays no default gateway):
    Windows 2000 IP Configuration
    Host Name . . . . . . . . . . . . : archimedes
    Primary DNS Suffix . . . . . . . : BUSSER.int
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : Yes
    WINS Proxy Enabled. . . . . . . . : No
    DNS Suffix Search List. . . . . . : BUSSER.int

    Ethernet adapter Wireless-1:
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : D-Link AirPlus XtremeG+ DWL-G520+
    Wireless PCI Adapter
    Physical Address. . . . . . . . . : 00-80-C8-2D-33-F2
    DHCP Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 192.168.1.4
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.1
    DNS Servers . . . . . . . . . . . : 192.168.1.8
    192.168.1.1

    Ethernet adapter Lan-2:
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Intel(R) PRO/100+ Management Adapter
    Physical Address. . . . . . . . . : 00-D0-B7-BD-C5-92
    DHCP Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 192.168.2.4
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    DNS Servers . . . . . . . . . . . : 192.168.1.8
    192.168.1.1
    ---------------------------------
    Output "Route Print" W2k Server
    ================================================== =========================
    Interface List
    0x1 ........................... MS TCP Loopback interface
    0x2 ...00 80 c8 2d 33 f2 ...... D-Link AirPlus Wireless Adapter
    0x3 ...00 d0 b7 bd c5 92 ...... Intel(R) PRO Adapter
    ================================================== =========================
    ================================================== =========================
    Active Routes:
    Network Destination Netmask Gateway Interface
    Metric
    0.0.0.0 0.0.0.0 192.168.1.1
    192.168.1.4 1
    127.0.0.0 255.0.0.0 127.0.0.1
    127.0.0.1 1
    192.168.1.0 255.255.255.0 192.168.1.4 192.168.1.4
    1
    192.168.1.4 255.255.255.255 127.0.0.1 127.0.0.1
    1
    192.168.1.255 255.255.255.255 192.168.1.4 192.168.1.4
    1
    192.168.2.0 255.255.255.0 192.168.2.4 192.168.2.4
    1
    192.168.2.4 255.255.255.255 127.0.0.1 127.0.0.1
    1
    192.168.2.255 255.255.255.255 192.168.2.4 192.168.2.4
    1
    224.0.0.0 224.0.0.0 192.168.1.4
    192.168.1.4 1
    224.0.0.0 224.0.0.0 192.168.2.4
    192.168.2.4 1
    255.255.255.255 255.255.255.255 192.168.1.4 192.168.1.4
    1
    Default Gateway: 192.168.1.1
    ================================================== =========================
    Persistent Routes:
    None
    ---------------------------------------------------------------------------
    ---------------------------------------------------------------------------
    192.168.1.1 is a wireless belkin router configured as a AP, it has 4 network
    connections (=switch) and one wan connection.
    WAN Connection = goes to my cable modem (for internet)
    LAN Connections 1 = DHCP Server (W2003 Server)
    Wireless Connection = The Above W2k Server with RRAS
    DHCP = Disabled
    ---------------------------------------------------------------------------
    ---------------------------------------------------------------------------
    192.168.2.1 is a belkin router configured as a AP, it has 4 network
    connections (=switch) and one wan connection.
    WAN Connection = Not Used
    LAN Connections 1 = DHCP Server (W2003 Server)
    LAN Connections 2 = TEST SERVER (W2k)
    DHCP = Enabled
    ---------------------------------------------------------------------------
    ---------------------------------------------------------------------------
    Wireless Connected laptop
    ---------------------------------
    IpConfig/All:
    Windows IP-configuratie
    Host-naam . . . . . . . . . . . .: TOSHIBA-01
    Primair DNS-achtervoegsel. . . . .: BUSSER.int
    Knooppunttype: . . . . . . . . . .: onbekend
    IP-routering ingeschakeld. . . . .: nee
    WINS-proxy ingeschakeld . . . . . : nee
    DNS-achtervoegselzoeklijst. . . . : BUSSER.int
    busser.int

    Ethernet-adapter Draadloze netwerkverbinding:
    Verbindingsspec. DNS-achtervoegsel: busser.int
    Beschrijving . . . . . . . . . . .:
    Intel(R) PRO/Wireless 2100 LAN 3B Mini PCI Adapter
    Fysiek adres. . . . . . . . . . . : 00-04-23-4A-4D-1D
    DHCP ingeshakeld. . . . . . . . . : ja
    Autom. configuratie ingeschakeld. : ja
    IP-adres. . . . . . . . . . . . . : 192.168.1.53
    Subnetmasker. . . . . . . . . . . : 255.255.255.0
    Standaardgateway. . . . . . . . . : 192.168.1.1
    DHCP-server . . . . . . . . . . . : 192.168.1.8
    DNS-servers . . . . . . . . . . . : 192.168.1.8
    192.168.1.1
    Lease verkregen . . . . . . . . . : zaterdag 25 maart 2006 10:42:27
    Lease verlopen . . . . . . . . . : zondag 2 april 2006 10:42:27
    ---------------------------------------------------------------------------
    ---------------------------------------------------------------------------
    TEST SERVER:
    ---------------------------------
    IpConfig/All:
    Windows 2000 IP Configuration
    Host Name . . . . . . . . . . . . : picasso
    Primary DNS Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Broadcast
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No

    Ethernet adapter Local Area Connection:
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : CNet PRO200WL PCI Fast Ethernet
    Adapter
    Physical Address. . . . . . . . . : 00-80-AD-78-74-E8
    DHCP Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 192.168.2.8
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.2.1
    DNS Servers . . . . . . . . . . . : 192.168.2.4
    192.168.2.1

    ---------------------------------------------------------------------------
    ---------------------------------------------------------------------------

    Everthing works normal only i can't get from network 192.168.1.x to
    192.168.2.x (and visa versa)





    "Dom" schreef in bericht
    news:4424c273$0$14626$892e7fe2@authen.yellow.readf reenews.net...
    >> the second gateway is based onto this
    >> article:http://support.microsoft.com/?kbid=178993#E0YB0ABAAA >

    > I don't see where the article says anything about a second gateway.
    > Perhaps you could quote the passage.
    >
    >> 192.168.2.4 is a belkin router configured as a AP, it has 4 network
    >> connections (=switch) and one wan connection, only the network
    >> connections are used.

    >
    > Below I quote you as saying that a RRAS server NIC is configured with
    > 192.168.2.4, so let's resolve that point. You say you are only using LAN
    > ports on the Belkin, so that is correct. DHCP is disabled on the Belkin?
    >
    >>>> W2k Server with Routing and Remote Access Configered
    >>>> 2 Networkcards with following config:
    >>>> IP: 192.168.1.4
    >>>> Mask: 255.255.255.0
    >>>> Gateway: 192.168.1.1
    >>>>
    >>>> IP: 192.168.2.4
    >>>> Mask: 255.255.255.0
    >>>> Gateway: 192.168.2.1

    >
    > Let's have a look at some host configurations. Ipconfig/all the server and
    > any hosts that are not functioning properly. Also, let's have a look at
    > the routing table from the device at 192.168.1.1.




  6. Re: W2k Server - 2 NIC's - RASS

    By my count you've got 2 networks and 3 DHCP servers, but I think this issue
    is related to routing.

    See how the following configuration jives with your network. I hope the
    table renders properly.

    Legend:
    r# indicates a router
    0.0 represents the default route
    1.0 and 2.0 represent the private networks
    * indicates a local network
    #.# indicates a gateway to a remote network, except in the case of ip
    obviously the first two octets have been removed from all IPs

    r1 r2 r2 r3
    ip 1.1 1.4 2.4 2.1
    0.0 1.1 2.4
    1.0 * * 2.4
    2.0 1.4 * *

    I'm thinking that you are missing the static route on r1. You need to add a
    static route to reach 192.168.2.0/24 via 192.168.1.4.

    I'll display the host configurations to make it a bit clearer.

    r1
    ip: 192.168.1.1
    static route: 192.168.2.0/24 via 1.4

    r2
    ip: 192.168.1.4
    ip: 192.168.2.4
    default gateway: 192.168.1.1

    r3
    ip: 192.168.2.1
    default gateway: 192.168.2.4



+ Reply to Thread