iomega zip100 issue

Hmmm...problem solved, tho i do no t know why exactly.

altho 'lsmod' showed ppa, parport, scsi_mod and sd_mod, i ran insmod on
them again. i also ran insmod on something called imm. (i saw this in a
posting somewhere. 'insmod imm' came back with a 'not found' error).

anyway, the end result of doing this was that /dev/sda and /dev/sda4
were created!!! i then ram iomegaware's 'iw' program and *bingo*
the zip100 drive got connected.

go figure...not sure why this did not happen at boot time
(auto-detect of the parallel port device and loading of the
proper modules...as with my USB zip100 drive).

so...i am gathering up what i did and stuffing it in rc.local!

- rich

rich coco wrote:[color=blue]
> I have a parallel-port iomega zip100 drive that i cannot get to work
> under fedora core-3. it worked fine under RH-9.
>
> yes, I have the ppa and parport modules loaded.
>
> HOWEVER, i notice that /dev/sd* does not exist at all!
>
> All the help i could find involved mounting the drive to /dev/sda4.
> I have no such /dev files on my fedora-Core-3 installation.
> Is this an indication of a deeper problem?
> (I tried using /dev/parport[0-3] instead, to no avail.)
>
> FWIW - on a fedora-core-3 system at home, i have a USB zip100 drive
> working fine. It did so "out of the box" and is properly mounted at
> system boot time.[/color]