The protocol IPX work in the poptop? - PPP

This is a discussion on The protocol IPX work in the poptop? - PPP ; i am configuring the poptop and show error: Unsupported protocol 'Novell IPX Control Protocol' (0x802b) received look the: http://groups.google.com.pe/group/co...e3d57f372030aa the ask is: the protocol IPX passthoug in the vpn with mppe or pptp simple?? thanks group...

+ Reply to Thread
Results 1 to 9 of 9

Thread: The protocol IPX work in the poptop?

  1. The protocol IPX work in the poptop?

    i am configuring the poptop and show error:

    Unsupported protocol 'Novell IPX Control Protocol' (0x802b) received

    look the:

    http://groups.google.com.pe/group/co...e3d57f372030aa

    the ask is:

    the protocol IPX passthoug in the vpn with mppe or pptp simple??

    thanks group


  2. Re: The protocol IPX work in the poptop?

    "walterwn" writes:
    > i am configuring the poptop and show error:
    >
    > Unsupported protocol 'Novell IPX Control Protocol' (0x802b) received


    Did you enable the "ipx" option in your pppd configuration? And does
    your system itself actually support routing IPX packets?

    Please post your configuration files and debug logs.

    > the protocol IPX passthoug in the vpn with mppe or pptp simple??


    Neither mppe nor pptp should have anything to do with IPX support.

    --
    James Carlson, KISS Network
    Sun Microsystems / 1 Network Drive 71.232W Vox +1 781 442 2084
    MS UBUR02-212 / Burlington MA 01803-2757 42.496N Fax +1 781 442 1677

  3. Re: The protocol IPX work in the poptop?

    Nov 28 19:07:08 sip pptpd[3910]: CTRL: Starting call (launching pppd,
    opening GRE)
    Nov 28 19:07:08 sip pppd[3911]: IPX support is not present in the
    kernel
    Nov 28 19:07:08 sip pppd[3911]: pppd 2.4.3 started by root, uid 0
    Nov 28 19:07:08 sip pppd[3911]: Using interface ppp0
    Nov 28 19:07:08 sip pppd[3911]: Connect: ppp0 <--> /dev/pts/2
    Nov 28 19:07:08 sip pptpd[3910]: GRE: Bad checksum from pppd.
    Nov 28 19:07:08 sip pptpd[3910]: CTRL: Ignored a SET LINK INFO packet
    with real ACCMs!
    Nov 28 19:07:09 sip pppd[3911]: Unsupported protocol 'Novell IPX
    Control Protocol' (0x802b) received
    Nov 28 19:07:09 sip pppd[3911]: MPPE 128-bit stateless compression
    enabled
    Nov 28 19:07:10 sip pppd[3911]: not replacing existing default route to
    eth0 [201.230.97.105]
    Nov 28 19:07:10 sip pppd[3911]: Cannot determine ethernet address for
    proxy ARP
    Nov 28 19:07:10 sip pppd[3911]: local IP address 192.168.50.182
    Nov 28 19:07:10 sip pppd[3911]: remote IP address 192.168.50.160

    /etc/ppp/options.pptp

    name pptpd
    refuse-pap
    refuse-chap
    refuse-mschap
    require-mschap-v2
    require-mppe-128
    ms-dns 200.48.225.130
    ms-dns 200.48.225.146
    lock
    ipx
    +ipx
    ipx-routing 2
    nobsdcomp

    /etc/options
    lock
    +ipx
    ipx
    ipx-routing 2
    ipx-router-name gate
    ipx-network 0000000
    ipx-node 40:0
    #ipx-accept-remote


    i am conecct windows xp, up ipx in client but no accept coecction ipx,
    tpc yes but ipx not.

    thanks


  4. Re: The protocol IPX work in the poptop?

    i am using pptp with mppe, work ipx connections???


  5. Re: The protocol IPX work in the poptop?

    walterwn wrote:
    > Nov 28 19:07:08 sip pptpd[3910]: CTRL: Starting call (launching pppd,
    > opening GRE)
    > Nov 28 19:07:08 sip pppd[3911]: IPX support is not present in the
    > kernel


    No kernel support.

    --
    Clifford Kite
    /* On Linux be root, on Windows reboot.
    -Josef Müllers */

  6. Re: The protocol IPX work in the poptop?

    kernel compile

    CONFIG_IPX=y
    CONFIG_IPX_INTERN=y

    any variable cofigure??



    Clifford Kite ha escrito:

    > walterwn wrote:
    > > Nov 28 19:07:08 sip pptpd[3910]: CTRL: Starting call (launching pppd,
    > > opening GRE)
    > > Nov 28 19:07:08 sip pppd[3911]: IPX support is not present in the
    > > kernel

    >
    > No kernel support.
    >
    > --
    > Clifford Kite
    > /* On Linux be root, on Windows reboot.
    > -Josef Müllers */



  7. Re: The protocol IPX work in the poptop?

    walterwn wrote:
    > kernel compile


    > CONFIG_IPX=y
    > CONFIG_IPX_INTERN=y


    > any variable cofigure??


    Don't really know, I've not used IPX or PoPToP. What kernel? A recursive
    grep of the 2.6.18 kernel source for IPX here didn't find a PPP-related
    IPX config. The kernel file drivers/net/ppp_generic.c did show

    #define NP_IPX 2 /* IPX protocol */

    Check to see if it is the same in that file for your kernel. And here
    in include/linux/ppp_defs.h PPP_IPX and PPP_IPXCP are defined.

    That's about all I have to offer. You might have better luck trying
    comp.os.linux.networking.

    --
    Clifford Kite

  8. Re: The protocol IPX work in the poptop?

    i am look the variables, and it is configured iqual; read the ipx have
    cofigured, instal ncpfs and begining configured, look no much
    information about it.

    it is nesessary configured ipx ?

    thanks



    Clifford Kite ha escrito:

    > walterwn wrote:
    > > kernel compile

    >
    > > CONFIG_IPX=y
    > > CONFIG_IPX_INTERN=y

    >
    > > any variable cofigure??

    >
    > Don't really know, I've not used IPX or PoPToP. What kernel? A recursive
    > grep of the 2.6.18 kernel source for IPX here didn't find a PPP-related
    > IPX config. The kernel file drivers/net/ppp_generic.c did show
    >
    > #define NP_IPX 2 /* IPX protocol */
    >
    > Check to see if it is the same in that file for your kernel. And here
    > in include/linux/ppp_defs.h PPP_IPX and PPP_IPXCP are defined.
    >
    > That's about all I have to offer. You might have better luck trying
    > comp.os.linux.networking.
    >
    > --
    > Clifford Kite



  9. Re: The protocol IPX work in the poptop?

    walterwn wrote:
    > i am look the variables, and it is configured iqual; read the ipx have
    > cofigured, instal ncpfs and begining configured, look no much
    > information about it.


    > it is nesessary configured ipx ?


    According to the config IPX help, it is necessary to "access Novell
    NetWare file." For the 2.6.18 kernel the NCP fs "make menuconfig"
    location is

    File systems
    Network File Systems
    < > NCP file system support (to mount NetWare volumes)

    If adding NCP support solves this problem then it seems to me that
    the pppd message should complain about no NCP fs support rather than
    no IPX support.

    --
    Clifford Kite
    /* In his wisdom RMS decided that people need no man pages when they can
    use GNU's beautiful info system.
    Unfortunately, everybody I know greatly prefers man pages.
    - From the man-pages-1.55/man1/README */

+ Reply to Thread