Help with router config changes for ppp?
I have a 1005 which appears to have failed (?) I have an 805 to
replace it with but need some help configuring. Attached is the
config that used to work with the 1005... would someone be so kind as
to tell me what the 805 should look like? I would be most grateful.
Communicating with Sun box on serial side using DTE cable with ppp.
no service pad
ip address 184.108.40.206 255.255.255.0
ip address 220.127.116.11 255.255.255.0
ip tcp header-compression passive
async default routing
async mode dedicated
peer default ip address 18.104.22.168
no cdp enable
router igrp 1
no ip classless
no logging console
line con 0
exec-timeout 0 0
line vty 0 4