PPP Connection problem with Windows 2003 Server - PPP

This is a discussion on PPP Connection problem with Windows 2003 Server - PPP ; Hello, I am using a properitary PPPd(CCP not supported) to connect with Windows 2003 Server. When i try to connect i got struck with CCP/NCP negotiation. Till Authentication all negotiations are success. I have included the Windows Log after auth ...

+ Reply to Thread
Results 1 to 5 of 5

Thread: PPP Connection problem with Windows 2003 Server

  1. PPP Connection problem with Windows 2003 Server

    Hello,

    I am using a properitary PPPd(CCP not supported) to connect with
    Windows 2003 Server.

    When i try to connect i got struck with CCP/NCP negotiation.

    Till Authentication all negotiations are success. I have included the
    Windows Log after auth negotiations.

    It seems Windows Closes the connection after receiving Protocol Reject
    for CCP.

    is there any way to disable CCP by configurations on windows side?

    Does this the property of Windows server?

    With Regards,
    Muthukumaran P.
    Senior Software Engineer,
    http://www.iwavesystems.com

    [972] 06-05 12:10:09:250: Packet received (64 bytes) for hPort 12
    [1308] 06-05 12:10:09:250: >PPP packet received at 06/05/2004
    03:10:09:250
    [1308] 06-05 12:10:09:250: >Protocol = CHAP, Type = Protocol specific,
    Length = 0x40, Id = 0x0, Port = 12
    [1308] 12:10:09:250: >C2 23 02 00 00 3E 31 00 01 02 03 04 05 06 07 08
    |.#...>1.........|
    [1308] 12:10:09:250: >09 0A 0B 0C 0D 0E 0F 00 00 00 00 00 00 00 00 55
    |...............U|
    [1308] 12:10:09:250: >CF 69 2B 23 AB D0 67 45 A3 BB 6B 0D 63 C5 C3 4E
    |.i+#..gE..k.c..N|
    [1308] 12:10:09:250: >6F 95 C4 0F F7 11 78 00 75 73 65 72 30 30 30 31
    |o.....x.user0001|
    [1308] 06-05 12:10:09:250:
    [1308] 06-05 12:10:09:250: RemoveFromTimerQ called
    portid=68,Id=0,Protocol=c223,EventType=0,fAuth=1
    [1308] 06-05 12:10:09:296: [1308] 06-05 12:10:09:296: Length = 0x30, Id = 0x0, Port = 12
    [1308] 12:10:09:296: |.#....S=1FB7C46C|
    [1308] 12:10:09:296: <30 34 43 38 41 42 30 39 33 36 36 36 35 44 31 44
    |04C8AB0936665D1D|
    [1308] 12:10:09:296: <45 44 46 31 44 31 35 39 31 37 41 45 33 42 44 35
    |EDF1D15917AE3BD5|
    [1308] 06-05 12:10:09:296:
    [1308] 06-05 12:10:09:296: Encryption
    [1308] 06-05 12:10:09:296: Strong encryption
    [1308] 06-05 12:10:09:296: MPPE-Send/Recv-Keys set
    [1308] 06-05 12:10:09:296: Auth Attribute Domain = SUNRAY-XXDEZIKC
    [1308] 06-05 12:10:09:296: Auth Attribute Idle Timeout Seconds = 0
    [1308] 06-05 12:10:09:296: AuthAttribute MaxChannelsAllowed = -1
    [1308] 06-05 12:10:09:296: FsmThisLayerUp called for protocol = c223,
    port = 12
    [1308] 06-05 12:10:09:296: NotifyCaller(hPort=12, dwMsgId=17)
    [1308] 06-05 12:10:09:296: NotifyCaller(hPort=12, dwMsgId=20)
    [3100] 06-05 12:10:09:359: PPPEMSG_DdmInterfaceInfo
    recvd,IPXif=0,IPif=4,Type=0

    [1308] 06-05 12:10:09:359: Will not initialize CP 8029
    [1308] 06-05 12:10:09:359: Will not initialize CP 802b
    [1308] 06-05 12:10:09:359: FsmInit called for protocol = 80fd, port =
    12
    [1308] 06-05 12:10:09:359: FsmReset called for protocol = 80fd, port =
    12
    [1308] 06-05 12:10:09:359: FsmInit called for protocol = 8021, port =
    12
    [1308] 06-05 12:10:09:406: FsmReset called for protocol = 8021, port =
    12
    [1308] 06-05 12:10:09:406: FsmOpen event received for protocol 80fd on
    port 12
    [1308] 06-05 12:10:09:406: FsmThisLayerStarted called for protocol =
    80fd, port = 12
    [1308] 06-05 12:10:09:406: FsmUp event received for protocol 80fd on
    port 12
    [1308] 06-05 12:10:09:406: [1308] 06-05 12:10:09:406: Length = 0xc, Id = 0x3, Port = 12
    [1308] 12:10:09:406: <80 FD 01 03 00 0A 12 06 00 00 00 E1 00 00 00 00
    |................|
    [1308] 06-05 12:10:09:406:
    [1308] 06-05 12:10:09:406: InsertInTimerQ called
    portid=68,Id=3,Protocol=80fd,EventType=0,fAuth=0
    [1308] 06-05 12:10:09:406: FsmOpen event received for protocol 8021 on
    port 12
    [1308] 06-05 12:10:09:406: FsmThisLayerStarted called for protocol =
    8021, port = 12
    [1308] 06-05 12:10:09:406: FsmUp event received for protocol 8021 on
    port 12
    [1308] 06-05 12:10:09:406: [1308] 06-05 12:10:09:406: Length = 0x12, Id = 0x4, Port = 12
    [1308] 12:10:09:406: <80 21 01 04 00 10 02 06 00 2D 0F 01 03 06 C0 A8
    |.!.......-......|
    [1308] 12:10:09:406: <1E 66 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    |.f..............|
    [1308] 06-05 12:10:09:406:
    [1308] 06-05 12:10:09:406: InsertInTimerQ called
    portid=68,Id=4,Protocol=8021,EventType=0,fAuth=0
    [972] 06-05 12:10:09:421: Packet received (18 bytes) for hPort 12
    [1308] 06-05 12:10:09:421: >PPP packet received at 06/05/2004
    03:10:09:421
    [1308] 06-05 12:10:09:421: >Protocol = IPCP, Type = Configure-Req,
    Length = 0x12, Id = 0x1, Port = 12
    [1308] 12:10:09:421: >80 21 01 01 00 10 02 06 00 2D 0F 01 03 06 00 00
    |.!.......-......|
    [1308] 12:10:09:421: >00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    |................|
    [1308] 06-05 12:10:09:421:
    [1308] 06-05 12:10:09:421: [1308] 06-05 12:10:09:421: Length = 0xc, Id = 0x1, Port = 12
    [1308] 12:10:09:421: <80 21 03 01 00 0A 03 06 C0 A8 1E 67 00 00 00 00
    |.!.........g....|
    [1308] 06-05 12:10:09:421:
    [972] 06-05 12:10:09:546: Packet received (16 bytes) for hPort 12
    [1308] 06-05 12:10:09:546: >PPP packet received at 06/05/2004
    03:10:09:546
    [1308] 06-05 12:10:09:546: >Protocol = LCP, Type = Protocol-Reject,
    Length = 0x10, Id = 0x3, Port = 12
    [1308] 12:10:09:546: >C0 21 08 03 00 0E 80 FD 01 03 00 0A 12 06 00 00
    |.!..............|
    [1308] 06-05 12:10:09:546:
    [1308] 06-05 12:10:09:546: PPP Protocol Reject, Protocol = 80fd
    [1308] 06-05 12:10:09:546: RemoveFromTimerQ called
    portid=68,Id=3,Protocol=80fd,EventType=0,fAuth=0
    [1308] 06-05 12:10:09:546: FsmThisLayerFinished called for protocol =
    80fd, port = 12
    [1308] 06-05 12:10:09:546: NotifyCaller(hPort=12, dwMsgId=14)
    [3100] 06-05 12:10:09:546: PppDdmStop

    [3100] 06-05 12:10:09:546: PPPEMSG_Stop recvd

    [1308] 06-05 12:10:09:546: FsmClose event received for protocol c021
    on port 12
    [1308] 06-05 12:10:09:546: RemoveFromTimerQ called
    portid=68,Id=1,Protocol=c021,EventType=0,fAuth=0
    [1308] 06-05 12:10:09:546: FsmThisLayerDown called for protocol =
    c021, port = 12
    [1308] 06-05 12:10:09:546: FsmDown event received for protocol 80fd on
    port 12
    [1308] 06-05 12:10:09:546: RemoveFromTimerQ called
    portid=68,Id=3,Protocol=80fd,EventType=0,fAuth=0
    [1308] 06-05 12:10:09:546: FsmReset called for protocol = 80fd, port =
    12
    [1308] 06-05 12:10:09:546: FsmDown event received for protocol 8021 on
    port 12
    [1308] 06-05 12:10:09:546: RemoveFromTimerQ called
    portid=68,Id=4,Protocol=8021,EventType=0,fAuth=0
    [1308] 06-05 12:10:09:546: FsmReset called for protocol = 8021, port =
    12
    [1308] 06-05 12:10:09:546: RemoveFromTimerQ called
    portid=68,Id=0,Protocol=c029,EventType=0,fAuth=0
    [1308] 06-05 12:10:09:546: [1308] 06-05 12:10:09:546: Length = 0x12, Id = 0x5, Port = 12
    [1308] 12:10:09:546: |.!....u....<.t..|
    [1308] 12:10:09:546: <02 E6 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    |................|
    [1308] 06-05 12:10:09:546:
    [1308] 06-05 12:10:09:546: InsertInTimerQ called
    portid=68,Id=5,Protocol=c021,EventType=0,fAuth=0
    [972] 06-05 12:10:09:546: Packet received (18 bytes) for hPort 12
    [1308] 06-05 12:10:09:546: >PPP packet received at 06/05/2004
    03:10:09:546
    [1308] 06-05 12:10:09:546: >Protocol = IPCP, Type = Configure-Ack,
    Length = 0x12, Id = 0x4, Port = 12
    [1308] 12:10:09:546: >80 21 02 04 00 10 02 06 00 2D 0F 01 03 06 C0 A8
    |.!.......-......|
    [1308] 12:10:09:546: >1E 66 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    |.f..............|
    [1308] 06-05 12:10:09:546:
    [1308] 06-05 12:10:09:546: Non-LCP packet received when LCP is not
    opened
    [1308] 06-05 12:10:09:546: Packet being silently discarded
    [972] 06-05 12:10:09:562: Packet received (18 bytes) for hPort 12
    [1308] 06-05 12:10:09:562: >PPP packet received at 06/05/2004
    03:10:09:562
    [1308] 06-05 12:10:09:562: >Protocol = IPCP, Type = Configure-Req,
    Length = 0x12, Id = 0x1, Port = 12
    [1308] 12:10:09:562: >80 21 01 01 00 10 02 06 00 2D 0F 01 03 06 C0 A8
    |.!.......-......|
    [1308] 12:10:09:562: >1E 67 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    |.g..............|
    [1308] 06-05 12:10:09:562:
    [1308] 06-05 12:10:09:562: Non-LCP packet received when LCP is not
    opened
    [1308] 06-05 12:10:09:562: Packet being silently discarded
    [972] 06-05 12:10:09:734: Packet received (18 bytes) for hPort 12
    [1308] 06-05 12:10:09:734: >PPP packet received at 06/05/2004
    03:10:09:734
    [1308] 06-05 12:10:09:734: >Protocol = LCP, Type = Terminate-Ack,
    Length = 0x12, Id = 0x5, Port = 12
    [1308] 12:10:09:734: >C0 21 06 05 00 10 75 DF 02 EC 00 3C CD 74 00 00
    |.!....u....<.t..|
    [1308] 12:10:09:734: >02 E6 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    |................|
    [1308] 06-05 12:10:09:734:
    [1308] 06-05 12:10:09:734: RemoveFromTimerQ called
    portid=68,Id=5,Protocol=c021,EventType=0,fAuth=0
    [1308] 06-05 12:10:09:734: FsmThisLayerFinished called for protocol =
    c021, port = 12
    [1308] 06-05 12:10:09:734: FsmThisLayerFinished called for protocol =
    80fd, port = 12: 0
    [1308] 06-05 12:10:09:734: FsmThisLayerFinished called for protocol =
    8021, port = 12: 0
    [1308] 06-05 12:10:09:734: NotifyCaller(hPort=12, dwMsgId=18)
    [972] 06-05 12:10:11:203: PPPEMSG_LineDown recvd, hPort=12

  2. Re: PPP Connection problem with Windows 2003 Server

    kumaranbe@hotmail.com writes:
    > It seems Windows Closes the connection after receiving Protocol Reject
    > for CCP.


    Yes, it does this because it's trying to negotiate encryption (MPPE),
    and you're refusing that.

    > is there any way to disable CCP by configurations on windows side?
    >
    > Does this the property of Windows server?


    It is when MPPE is enabled. The properties should look something like
    this:

    http://www.jacco2.dds.nl/networking/...encryption.png

    (Note: I don't use MS software ... pointing to pages that are easy to
    find with google is about the best I can do there.)

    > [1308] 06-05 12:10:09:296: Encryption
    > [1308] 06-05 12:10:09:296: Strong encryption
    > [1308] 06-05 12:10:09:296: MPPE-Send/Recv-Keys set


    Note the above.

    > [1308] 06-05 12:10:09:406: > [1308] 06-05 12:10:09:406: > Length = 0xc, Id = 0x3, Port = 12
    > [1308] 12:10:09:406: <80 FD 01 03 00 0A 12 06 00 00 00 E1 00 00 00 00

    ^^

    Note that value -- the '1' in the least significant bit means that the
    peer is asking for MPPE.

    --
    James Carlson, IP Systems Group
    Sun Microsystems / 1 Network Drive 71.234W Vox +1 781 442 2084
    MS UBUR02-212 / Burlington MA 01803-2757 42.497N Fax +1 781 442 1677

  3. Re: PPP Connection problem with Windows 2003 Server

    James Carlson wrote:
    > kumaranbe@hotmail.com writes:
    >> It seems Windows Closes the connection after receiving Protocol Reject
    >> for CCP.


    > Yes, it does this because it's trying to negotiate encryption (MPPE),
    > and you're refusing that.


    >> is there any way to disable CCP by configurations on windows side?
    >>
    >> Does this the property of Windows server?


    > It is when MPPE is enabled. The properties should look something like
    > this:


    > http://www.jacco2.dds.nl/networking/...encryption.png


    > (Note: I don't use MS software ... pointing to pages that are easy to
    > find with google is about the best I can do there.)


    >> [1308] 06-05 12:10:09:296: Encryption
    >> [1308] 06-05 12:10:09:296: Strong encryption
    >> [1308] 06-05 12:10:09:296: MPPE-Send/Recv-Keys set


    > Note the above.


    >> [1308] 06-05 12:10:09:406: >> [1308] 06-05 12:10:09:406: >> Length = 0xc, Id = 0x3, Port = 12
    >> [1308] 12:10:09:406: <80 FD 01 03 00 0A 12 06 00 00 00 E1 00 00 00 00

    > ^^


    > Note that value -- the '1' in the least significant bit means that the
    > peer is asking for MPPE.


    Don't you really mean MPPC?

    --
    Clifford Kite Email: "echo xvgr_yvahk-ccc@ri1.arg|rot13"
    PPP-Q&A links, downloads: http://ckite.no-ip.net/
    /* The generation of random numbers is too important to be left
    to chance. */

  4. Re: PPP Connection problem with Windows 2003 Server

    Clifford Kite writes:
    > >> [1308] 12:10:09:406: <80 FD 01 03 00 0A 12 06 00 00 00 E1 00 00 00 00

    > > ^^
    > > Note that value -- the '1' in the least significant bit means that the
    > > peer is asking for MPPE.

    >
    > Don't you really mean MPPC?


    Er ... oops. Thanks for pointing that out. Actually, I meant to say
    that the _other_ bits set there (besides just the LSB) mean that it's
    asking for MPPE in addition to MPPC.

    --
    James Carlson, IP Systems Group
    Sun Microsystems / 1 Network Drive 71.234W Vox +1 781 442 2084
    MS UBUR02-212 / Burlington MA 01803-2757 42.497N Fax +1 781 442 1677

  5. Re: PPP Connection problem with Windows 2003 Server

    James Carlson wrote in message news:...
    > Clifford Kite writes:
    > > >> [1308] 12:10:09:406: <80 FD 01 03 00 0A 12 06 00 00 00 E1 00 00 00 00
    > > > ^^
    > > > Note that value -- the '1' in the least significant bit means that the
    > > > peer is asking for MPPE.

    > >
    > > Don't you really mean MPPC?

    >
    > Er ... oops. Thanks for pointing that out. Actually, I meant to say
    > that the _other_ bits set there (besides just the LSB) mean that it's
    > asking for MPPE in addition to MPPC.


    Thank you very much Carlson.

+ Reply to Thread