Hi,

I'm trying to set up an ADSL connection under suse 7.1....

I've got the following error message in the /var/log/messages:


Sep 16 23:01:26 linux modem_run[563]: modem_run version 1.1 started by
root uid 0
Sep 16 23:01:40 linux modem_run[564]: modem_run version 1.1 started by
root uid 0
Sep 16 23:01:42 linux kernel: usb_control/bulk_msg: timeout
Sep 16 23:01:42 linux kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep
0x85 len 512 ret -110
Sep 16 23:02:02 linux modem_run[564]: ADSL synchronization has been
obtained
Sep 16 23:02:02 linux modem_run[564]: ADSL line is up (2560 kbit/s
down | 352 kbit/s up)



Sep 16 23:02:36 linux kernel: CSLIP: code copyright 1989 Regents of
the University of California
Sep 16 23:02:36 linux kernel: PPP generic driver version 2.4.2
Sep 16 23:02:36 linux pppd[570]: pppd 2.4.0 started by root, uid 0
Sep 16 23:02:36 linux pppd[570]: using channel 1
Sep 16 23:02:36 linux pppd[570]: Using interface ppp0
Sep 16 23:02:36 linux pppd[570]: Connect: ppp0 <--> /dev/pts/3
Sep 16 23:02:36 linux pppoa3[571]: pppoa3 version 1.2-beta2 started by
root (uid 0)
Sep 16 23:02:36 linux pppoa3[571]: Control thread ready
Sep 16 23:02:36 linux kernel: HDLC line discipline: version $Revision:
3.3 $, maxframe=4096
Sep 16 23:02:36 linux kernel: N_HDLC line discipline registered.
Sep 16 23:02:36 linux pppoa3[576]: host --> pppoa3 --> modem stream
ready
Sep 16 23:02:36 linux pppoa3[577]: modem --> pppoa3 --> host stream
ready
Sep 16 23:02:37 linux pppd[570]: sent [LCP ConfReq id=0x1 0x0> ]
Sep 16 23:03:04 linux last message repeated 9 times
Sep 16 23:03:07 linux pppd[570]: LCP: timeout sending Config-Requests
Sep 16 23:03:07 linux pppd[570]: Connection terminated.
Sep 16 23:03:07 linux pppoa3[576]: Error reading from source device
Sep 16 23:03:07 linux pppoa3[571]: Woken by a sem_post event ->
Exiting
Sep 16 23:03:07 linux pppoa3[571]: Write to usb Canceled
Sep 16 23:03:07 linux pppd[570]: using channel 2
Sep 16 23:03:07 linux pppoa3[571]: Exiting


Sep 16 23:03:07 linux pppd[570]: Using interface ppp0
Sep 16 23:03:07 linux pppd[570]: Connect: ppp0 <--> /dev/pts/4
Sep 16 23:03:07 linux pppd[570]: sent [LCP ConfReq id=0x2 0x0> ]
Sep 16 23:03:07 linux pppd[570]: Script /usr/local/sbin/pppoa3 -m 1 -c
-vpi 8 -vci 35 finished (pid 571), status = 0xff00
Sep 16 23:03:07 linux pppoa3[580]: pppoa3 version 1.2-beta2 started by
root (uid 0)
Sep 16 23:03:07 linux pppoa3[580]: Control thread ready
Sep 16 23:03:07 linux pppoa3[583]: host --> pppoa3 --> modem stream
ready
Sep 16 23:03:07 linux pppoa3[584]: modem --> pppoa3 --> host stream
ready
Sep 16 23:03:10 linux pppd[570]: sent [LCP ConfReq id=0x2 0x0> ]
Sep 16 23:03:34 linux last message repeated 8 times
Sep 16 23:03:37 linux pppd[570]: LCP: timeout sending Config-Requests
Sep 16 23:03:37 linux pppd[570]: Connection terminated.
Sep 16 23:03:37 linux pppoa3[583]: Error reading from source device
Sep 16 23:03:37 linux pppoa3[580]: Woken by a sem_post event ->
Exiting
Sep 16 23:03:37 linux pppoa3[580]: Write to usb Canceled
Sep 16 23:03:37 linux pppd[570]: Waiting for 1 child processes...
Sep 16 23:03:37 linux pppd[570]: script /usr/local/sbin/pppoa3 -m 1
-c -vpi 8 -vci 35, pid 580
Sep 16 23:03:37 linux pppoa3[580]: Exiting


Can somebody help me out with this??

If I've to use pppoe, which arugment I'm suppose to pass to the
command?


Thanks a lot for your help!


MArc