PRPMC load error

Hi,

When I boot the box with PRPMC card, I got the following output.

Local Memory Found =20000000 (&536870912)


WARNING: Configuration Data Failure (Invoke 'ENV' Command)


WARNING: Board Configuration Data Failure


MPU Clock Speed =450Mhz


BUS Clock Speed =100Mhz


Reset Vector Location : ROM Bank A
Mezzanine Configuration: Single-MPU
Current 60X-Bus Master : MPU0
Idle MPU(s) : NONE


L2Cache: 2048KB, 180Mhz
System Memory: 512MB, ECC Enabled (ECC-Memory Detected)


WARNING: NVRAM Header Test Failed, Auto Initializing

After this, the box hangs and I didn't get the prompt. Could you
provide me how to resolve this issue.

Thanks,
Kumaresh

What is the "box"?
What PrPMC?
Is the PrPMC the monarch?
Are these messages from the PrPMC console or from the "box"'s console?

Perchance do you have a ":" prompt?

Regards
--
Bill Dennen ][ We have met the enemy,[color=blue]
>@< ][ and they are us ...[/color]
[email]ieee1014@hotmail.com[/email] ][ -- Pogo

"Kumaresh" <kumaresh.perumal@gmail.com> wrote in message
news:1133175905.004549.108960@g49g2000cwa.googlegroups.com...[color=blue]
> Hi,
>
> When I boot the box with PRPMC card, I got the following output.
>
> Local Memory Found =20000000 (&536870912)
>
>
> WARNING: Configuration Data Failure (Invoke 'ENV' Command)
>
>
> WARNING: Board Configuration Data Failure
>
>
> MPU Clock Speed =450Mhz
>
>
> BUS Clock Speed =100Mhz
>
>
> Reset Vector Location : ROM Bank A
> Mezzanine Configuration: Single-MPU
> Current 60X-Bus Master : MPU0
> Idle MPU(s) : NONE
>
>
> L2Cache: 2048KB, 180Mhz
> System Memory: 512MB, ECC Enabled (ECC-Memory Detected)
>
>
> WARNING: NVRAM Header Test Failed, Auto Initializing
>
> After this, the box hangs and I didn't get the prompt. Could you
> provide me how to resolve this issue.
>
> Thanks,
> Kumaresh
>[/color]