I'm trying to configure my 3com OfficeConnect Wireless PCMCIA card. 3com
have linux drivers on their web site for this card, but I can't compile
them. I disasembled the card and discovered it's a ADMTech 8211 chipset, so
I downloaded the linux drivers from
http://www.admtek.com.tw/download/ADM8211.htm, compiled and installed
without errors, but when I try 'modprobe 8211' get this ('insmod -f 8211'
returns the same):

Warning: loading /lib/modules/2.4.20-xfs-r3/kernel/drivers/net/pcmcia/8211.o
will taint the kernel: non-GPL license - Proprietary
See http://www.tux.org/lkml/#export-tainted for information about tainted
modules
/lib/modules/2.4.20-xfs-r3/kernel/drivers/net/pcmcia/8211.o: init_module: No
such device
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-xfs-r3/kernel/drivers/net/pcmcia/8211.o: insmod
/lib/modules/2.4.20-xfs-r3/kernel/drivers/net/pcmcia/8211.o failed
/lib/modules/2.4.20-xfs-r3/kernel/drivers/net/pcmcia/8211.o: insmod 8211
failed

dmesg:
cs: cb_alloc(bus 3): vendor 0x10b7, device 0x6000
PCI: Enabling device 03:00.0 (0000 -> 0003)

lspci -v:
03:00.0 Network controller: 3Com Corporation: Unknown device 6000 (rev 15)
Subsystem: 3Com Corporation: Unknown device 6000
Flags: medium devsel, IRQ 5
I/O ports at 4000 [size=256]
Memory at 10800000 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at 10400000 [size=128K]
Capabilities: [c0] Power Management version 2

lsmod:
ds 6472 1
yenta_socket 8704 1
pcmcia_core 32000 0 [ds yenta_socket]

cardctl status:
Socket 0:
3.3V CardBus card
function 0: [ready]

Thanks, LeChuck
--
lechuck una y solo una arroba, luego islamono y al final punto org.