cant bind socket - Portable

This is a discussion on cant bind socket - Portable ; I am having some problems getting my wireless network adapter to work again after i reloaded the OS on my laptop. I currently run Gentoo and i am using the pcmcia-cs package from portage. It automatically applys the orinoco patch ...

+ Reply to Thread
Results 1 to 3 of 3

Thread: cant bind socket

  1. cant bind socket

    I am having some problems getting my wireless network adapter to work
    again after i reloaded the OS on my laptop. I currently run Gentoo and i
    am using the pcmcia-cs package from portage. It automatically applys the
    orinoco patch from shmoo. I am fairly positive that i have compiled my
    kernel correctly and the pcmcia-cs package is installed right. Running
    kernel 4.2.0 (gentoo sources) and pcmcia-cs 3.2.4 with the orinoco patch.
    When pcmcia-cs services start up i get a high beep then a low one. It says
    watching 3 sockets. I have done searches on mailing lists and forums and
    with google and havent come across a solution that seems to fit what is
    going wrong. Hopefully someone here can help. Here is the output of dmesg
    and then a tail from /var/log/syslog (repsectively) after i start the
    pcmcia-cs service.

    Linux PCMCIA Card Services 3.2.4
    kernel build: 2.4.20-gentoo-r5-25Jul2003 #1 Fri Jul 25 11:21:33 CDT 2003
    options: [pci] [cardbus] [apm]
    Intel ISA/PCI/CardBus PCIC probe:
    PCI: Found IRQ 11 for device 02:01.0
    PCI: Sharing IRQ 11 with 02:01.1
    PCI: Found IRQ 11 for device 02:01.1
    PCI: Sharing IRQ 11 with 02:01.0
    TI 1420 rev 00 PCI-to-CardBus at slot 02:01, mem 0x20001000
    host opts [0]: [ring] [pci + serial irq] [pci irq 11] [lat 32/32] [bus 3/6]
    host opts [1]: [ring] [pci + serial irq] [pci irq 11] [lat 32/32] [bus 7/10]
    ISA irqs (scanned) = 3,4,5,7,9,10 PCI status changes
    PCI: Found IRQ 11 for device 02:03.0
    PCI: Sharing IRQ 11 with 00:1f.5
    PCI: Sharing IRQ 11 with 00:1f.6
    TI 1410 rev 01 PCI-to-CardBus at slot 02:03, mem 0x20003000
    host opts [0]: [pci only] [pci irq 11] [lat 32/176] [bus 11/14]
    PCI card interrupts, PCI status changes
    cs: memory probe 0xa0000000-0xa0ffffff: clean.
    hermes.c: 4 Dec 2002 David Gibson
    orinoco.c 0.13b (David Gibson and others)
    orinoco_cs.c 0.13b (David Gibson and others)

    Jul 25 12:50:04 localhost cardmgr[1035]: executing: 'modprobe -r orinoco_cs'
    Jul 25 12:50:05 localhost cardmgr[1035]: exiting
    Jul 25 12:50:05 localhost kernel: unloading PCMCIA Card Services
    Jul 25 12:50:06 localhost kernel: Linux PCMCIA Card Services 3.2.4
    Jul 25 12:50:06 localhost kernel: kernel build: 2.4.20-gentoo-r5-25Jul2003 #1 Fri Jul 25 11:21:33 CDT 2003
    Jul 25 12:50:06 localhost kernel: options: [pci] [cardbus] [apm]
    Jul 25 12:50:06 localhost kernel: Intel ISA/PCI/CardBus PCIC probe:
    Jul 25 12:50:06 localhost kernel: PCI: Found IRQ 11 for device 02:01.0
    Jul 25 12:50:06 localhost kernel: PCI: Sharing IRQ 11 with 02:01.1
    Jul 25 12:50:06 localhost kernel: PCI: Found IRQ 11 for device 02:01.1
    Jul 25 12:50:06 localhost kernel: PCI: Sharing IRQ 11 with 02:01.0
    Jul 25 12:50:06 localhost kernel: TI 1420 rev 00 PCI-to-CardBus at slot 02:01, mem 0x20001000
    Jul 25 12:50:06 localhost kernel: host opts [0]: [ring] [pci + serial irq] [pci irq 11] [lat 32/32] [bus 3/6]
    Jul 25 12:50:06 localhost kernel: host opts [1]: [ring] [pci + serial irq] [pci irq 11] [lat 32/32] [bus 7/10]
    Jul 25 12:50:06 localhost kernel: ISA irqs (scanned) = 3,4,5,7,9,10 PCI status changes
    Jul 25 12:50:06 localhost kernel: PCI: Found IRQ 11 for device 02:03.0
    Jul 25 12:50:06 localhost kernel: PCI: Sharing IRQ 11 with 00:1f.5
    Jul 25 12:50:06 localhost kernel: PCI: Sharing IRQ 11 with 00:1f.6
    Jul 25 12:50:06 localhost kernel: TI 1410 rev 01 PCI-to-CardBus at slot 02:03, mem 0x20003000
    Jul 25 12:50:06 localhost kernel: host opts [0]: [pci only] [pci irq 11] [lat 32/176] [bus 11/14]
    Jul 25 12:50:06 localhost kernel: PCI card interrupts, PCI status changes
    Jul 25 12:50:06 localhost cardmgr[8774]: watching 3 sockets
    Jul 25 12:50:06 localhost cardmgr[8774]: starting, version is 3.2.4
    Jul 25 12:50:06 localhost cardmgr[8774]: socket 2: Intersil PRISM2 11 Mbps Wireless Adapter
    Jul 25 12:50:06 localhost kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
    Jul 25 12:50:07 localhost cardmgr[8774]: executing: 'modprobe orinoco_cs'
    Jul 25 12:50:07 localhost kernel: hermes.c: 4 Dec 2002 David Gibson
    Jul 25 12:50:07 localhost kernel: orinoco.c 0.13b (David Gibson and others)
    Jul 25 12:50:07 localhost kernel: orinoco_cs.c 0.13b (David Gibson and others)
    Jul 25 12:50:07 localhost cardmgr[8774]: bind 'orinoco_cs' to socket 2 failed: Operation not permitted

  2. Re: cant bind socket

    richard witt wrote:
    > I am having some problems getting my wireless network adapter to work
    > again after i reloaded the OS on my laptop. I currently run Gentoo and i
    > am using the pcmcia-cs package from portage. It automatically applys the
    > orinoco patch from shmoo. I am fairly positive that i have compiled my
    > kernel correctly and the pcmcia-cs package is installed right. Running
    > kernel 4.2.0 (gentoo sources) and pcmcia-cs 3.2.4 with the orinoco patch.
    > When pcmcia-cs services start up i get a high beep then a low one. It says
    > watching 3 sockets. I have done searches on mailing lists and forums and
    > with google and havent come across a solution that seems to fit what is
    > going wrong. Hopefully someone here can help. Here is the output of dmesg
    > and then a tail from /var/log/syslog (repsectively) after i start the
    > pcmcia-cs service.


    ....

    > Jul 25 12:50:07 localhost cardmgr[8774]: bind 'orinoco_cs' to socket 2 failed: Operation not permitted


    In the past this particular error indicated either that the pcmcia-cs
    drivers were not recompiled after a change in kernel configuration, or
    that a kernel had some unusual patches that were not handled by the
    pcmcia-cs configuration scripts.

    I do not know what sorts of patches are included in the default gentoo
    kernel. Have you added any others? It does appear that you rebuilt
    pcmcia-cs after building your kernel so that part seems ok.

    -- Dave

  3. Re: cant bind socket

    On Sat, 26 Jul 2003 22:09:31 +0000, dhind wrote:

    >> Jul 25 12:50:07 localhost cardmgr[8774]: bind 'orinoco_cs' to socket 2 failed: Operation not permitted

    >
    > In the past this particular error indicated either that the pcmcia-cs
    > drivers were not recompiled after a change in kernel configuration, or
    > that a kernel had some unusual patches that were not handled by the
    > pcmcia-cs configuration scripts.
    >
    > I do not know what sorts of patches are included in the default gentoo
    > kernel. Have you added any others? It does appear that you rebuilt
    > pcmcia-cs after building your kernel so that part seems ok.
    >


    I have added no other patches to the kernel. And i am not 100% sure what
    patches are in the gentoo kernel. I will try just a stock kernel and some
    other options monday when i get back to work and see what happens.

    --
    rich

+ Reply to Thread