Your CD-Rom is SATA? If it is, try to change it to legacy mode in BIOS
and try

Trask Bryant Trojanek escribió:
> I am using a Dell Latitude CPx laptop, trying to install Plan 9.
> I successfully get to the "boot from:" line, but anything I put into
> the entry gives back no feedback. I have tried sdC0!cdboot!9pcflop.gz
> , sdC1!cdboot!9pcflop.gz , sdD0!9pcflop.gz , and sdD1!9pcflop.gz with
> no luck.
> Some of the lspci from Linux is posted here:
> 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX
> Host bridge (rev 03)
> 00:01.0 PC bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP
> bridge (rev 03)
> 00:03.0 CardBus bridge: Texas Instruments PCI1225 (rev 01)
> 00:03.1 CardBus bridge: Texas Instruments PCI1225 (rev 01)
> 00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
> 00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
>
> I can post the rest if needed (I have to type it by hand..) and any
> other general Linux commands output as well.
> I would very much like to get Plan 9 working on this laptop.
>