Printable View
Hi,
Today, under qemu, I updated my stand-alone Plan 9 system with:
/usr/glenda/bin/rc/pull
/usr/glenda/bin/rc/pull -s /386/lib/libc.a
/usr/glenda/bin/rc/pull -s /rc/bin/termrc
without apparent problems. But right after fshalt -r, rio
doesn't start anymore; I get:
init: starting /bin/rc
bind: #k: unknown device in # filename
rc: null list in concatenation
init: rc exit status: rc 23: error
init: starting /bin/rc
% _
Any ideas? Thank you very much, david.
* David JEANNOT (djeannot24@gmail.com) wrote:[color=blue]
> init: starting /bin/rc
> bind: #k: unknown device in # filename[/color]
This shouldn't be serious at all. The new diskparts script tries to bind the
fs device, whis isn't compiled into the standard terminal kernel, into the
namespace. I thought about making a patch to silence the bind, but it's
probably a good idea to have the error messages if you are using the fs
device.
[color=blue]
> rc: null list in concatenation
> init: rc exit status: rc 23: error[/color]
I'd like to make a wild guess here. Did you set up your network manually in
your old termrc? What does `echo $sysname' say? `cat /dev/sysname' ?
Martin
> bind: #k: unknown device in # filename
I don't see #k (fs(3)) appearing anywhere in /rc/bin/termrc, so I can
only presume you have it in a local startup. Depending on whether you
actually use it or not, you'll have to fix the startup script or
compile a kernel that has '#k' in it. I presume the absence of '#k'
is causing rc to stop.
Of course, I am just as likely to be missing the wood for the trees.
++L
On Sat, May 05, 2007 at 09:22:09PM +0200, Martin Neubauer wrote:[color=blue]
> * David JEANNOT (djeannot24@gmail.com) wrote:[color=green]
> > rc: null list in concatenation
> > init: rc exit status: rc 23: error[/color]
>
> I'd like to make a wild guess here. Did you set up your network
> manually in your old termrc?[/color]
Absolutely, I had:
if(! test -e /net/ipifc/0/ctl)
ip/ipconfig -g 10.0.2.2 ether /net/ether0 10.0.2.15 255.255.255.0 > /dev/null >[2=1]
[color=blue]
> What does `echo $sysname' say? `cat /dev/sysname' ?[/color]
Nothing for both:
% echo $sysname
% cat /dev/sysname
% _
Thank you Martin, david.
add ether= to your sys=yourmachine entry in your /lib/ndb/local
or brute force it by putting sysname=mymachine in your plan9.ini/termrc
On 5/5/07, David JEANNOT <djeannot24@gmail.com> wrote:[color=blue]
> On Sat, May 05, 2007 at 09:22:09PM +0200, Martin Neubauer wrote:[color=green]
> > * David JEANNOT (djeannot24@gmail.com) wrote:[color=darkred]
> > > rc: null list in concatenation
> > > init: rc exit status: rc 23: error[/color]
> >
> > I'd like to make a wild guess here. Did you set up your network
> > manually in your old termrc?[/color]
>
> Absolutely, I had:
>
> if(! test -e /net/ipifc/0/ctl)
> ip/ipconfig -g 10.0.2.2 ether /net/ether0 10.0.2.15 255.255.255.0 > /dev/null >[2=1]
>[color=green]
> > What does `echo $sysname' say? `cat /dev/sysname' ?[/color]
>
> Nothing for both:
>
> % echo $sysname
>
> % cat /dev/sysname
> % _
>
> Thank you Martin, david.
>[/color]
--
Federico G. Benavento
On 5/5/07, David JEANNOT <djeannot24@gmail.com> wrote:[color=blue]
> On Sat, May 05, 2007 at 09:22:09PM +0200, Martin Neubauer wrote:[color=green]
> > * David JEANNOT (djeannot24@gmail.com) wrote:[color=darkred]
> > > rc: null list in concatenation
> > > init: rc exit status: rc 23: error[/color]
> >
> > What does `echo $sysname' say? `cat /dev/sysname' ?[/color]
>
> Nothing for both:
>
> % echo $sysname
>
> % cat /dev/sysname
> % _
>
> Thank you Martin, david.
>[/color]
Ok, I read "sorry: termrc-error" on plan9changes list and modified
termrc accordingly.
Thanks to all, david.
On May 5, 7:32 pm, djeanno...@gmail.com (David JEANNOT) wrote:[color=blue]
> Hi,
>
> Today, under qemu, I updated my stand-alone Plan 9 system with:
>
> /usr/glenda/bin/rc/pull
> /usr/glenda/bin/rc/pull -s /386/lib/libc.a
> /usr/glenda/bin/rc/pull -s /rc/bin/termrc
>
> without apparent problems. But right after fshalt -r, rio
> doesn't start anymore; I get:
>
> init: starting /bin/rc
> bind: #k: unknown device in # filename
> rc: null list in concatenation
> init: rc exit status: rc 23: error
>
> init: starting /bin/rc
> % _
>
> Any ideas? Thank you very much, david.[/color]
Ok, I read "sorry: termrc-error" in the plan9changes list and updated
termrc accordingly.
Thanks to all, david.