Symbol Barcode Scanner Pistola Laser TN5250

Abbiamo un problema, non riesco a visualizzare il codice MAC sulla
pistola laser,
per interfacciare la pistola ho una culla cradle 6865, uso il sw winhxe
prego mi aiutate ha trovare il codice MAC sulla pistola eseguendo un
commando,
oppure con il sw?

Cordiali saluti

We have a problem, I don't succeed in visualizing the code MAC on
barcode scanner, for interfacciare the barcode I have a crib cradle
6865, use the sw winhxe
do I pray you help me it has MAC find the code on the gun performing a
command,
or with the sw?

Kindest regards

On 8 Aug 2006 08:12:19 -0700, [email]jibemb@gmail.com[/email] wrote:
[color=blue]
>Abbiamo un problema, non riesco a visualizzare il codice MAC sulla
>pistola laser,
>per interfacciare la pistola ho una culla cradle 6865, uso il sw winhxe
>prego mi aiutate ha trovare il codice MAC sulla pistola eseguendo un
>commando,
>oppure con il sw?
>
>Cordiali saluti
>
>We have a problem, I don't succeed in visualizing the code MAC on
>barcode scanner, for interfacciare the barcode I have a crib cradle
>6865, use the sw winhxe
>do I pray you help me it has MAC find the code on the gun performing a
>command,
>or with the sw?[/color]

I am not sure I understand. But I think you are trying to write a
program for a Symbol barcode scanner. If you are, then you should use
the SDK for that scanner from Symbol. I just made a few attempts to
find info on the TN5250, but failed.

Questions about programming Pocket PCs are more likely to get answers
in microsoft.public.pocketpc.developer

[color=blue]
>
>Kindest regards[/color]

-----------------------------------------
To reply to me, remove the underscores (_) from my email address (and please indicate which newsgroup and message).

Robert E. Zaret, eMVP
PenFact, Inc.
20 Park Plaza, Suite 478
Boston, MA 02116
[url]www.penfact.com[/url]

Thanks for the fast reply, my problem with the Symbol Barcode Scanner
don't I succeed to MAC to know the code, do I have to insert it in an
Acces
Point, would you know how to tell me as to make for MAC visualize the
code?
As I had written I have the sw HINHEX, and with it I don't succeed in
communicating with the Barcode Scanner.

Kindest regards


Grazie per la veloce risposta,il mio problema con la Symbol pistola
laser
non riesco a conoscere il codice MAC, devo inserirla in un Acces Point,
sapresti
dirmi come fare per visualizzare il codice MAC?
Come avevo scritto ho il sw HINHEX, e con esso non riesco a comunicare
con la
pistola laser

Cordiali saluti

Which Symbol terminal model do you have? It sounds from your cradle model
that it may be a PDT684x series unit using the TN5250 as a dos based client.

<jibemb@gmail.com> wrote in message
news:1155049939.047714.98480@m79g2000cwm.googlegroups.com...[color=blue]
> Abbiamo un problema, non riesco a visualizzare il codice MAC sulla
> pistola laser,
> per interfacciare la pistola ho una culla cradle 6865, uso il sw winhxe
> prego mi aiutate ha trovare il codice MAC sulla pistola eseguendo un
> commando,
> oppure con il sw?
>
> Cordiali saluti
>
> We have a problem, I don't succeed in visualizing the code MAC on
> barcode scanner, for interfacciare the barcode I have a crib cradle
> 6865, use the sw winhxe
> do I pray you help me it has MAC find the code on the gun performing a
> command,
> or with the sw?
>
> Kindest regards
>[/color]

Mark ha scritto:
[color=blue]
> Which Symbol terminal model do you have? It sounds from your cradle model
> that it may be a PDT684x series unit using the TN5250 as a dos based client.
>
> <jibemb@gmail.com> wrote in message
> news:1155049939.047714.98480@m79g2000cwm.googlegroups.com...[color=green]
> > Abbiamo un problema, non riesco a visualizzare il codice MAC sulla
> > pistola laser,
> > per interfacciare la pistola ho una culla cradle 6865, uso il sw winhxe
> > prego mi aiutate ha trovare il codice MAC sulla pistola eseguendo un
> > commando,
> > oppure con il sw?
> >
> > Cordiali saluti
> >
> > We have a problem, I don't succeed in visualizing the code MAC on
> > barcode scanner, for interfacciare the barcode I have a crib cradle
> > 6865, use the sw winhxe
> > do I pray you help me it has MAC find the code on the gun performing a
> > command,
> > or with the sw?
> >
> > Kindest regards
> >[/color][/color]

Ciao mio cradle è modello 3865, part.no. 59942-01-00, symbol
sn.M1H28H64K, FATTO IN MEXICO,
come ho scritto il Crandle non riesco a connetterlo, mi dire quale
programmi posso usare,
ho usato il programma WinHex non funziona, sei ha conoscenza di come
posso visualizzare
il numero MaC suulla barcode Scanner TN5250.

Cordiali saluti

Hi my cradle is model 3865, part.no. 59942-01-00, symbol sn.M1H28H64K,
made In
MEXICO, as I have written the Crandle I don't succeed in connecting it,
me
to say what programs I can use, I have used the program WinHex it
doesn't work,
you are it has knowledge of how the number I can visualize MaC my
barcode
Scanner TN5250.

Kindest regards

Hi,

I think you have a number of items mixed up

The 3865 cradle is maybe a single bay or a four bay unit depending on the
cofiguration.
TN5250 is not the scanner but software. To be exact it is IBM Terminal
emulation software for 5250 series. To find out the exact model of terminal
look on the white sticker where the serial number of the unit is and it will
say something like PDT6842-xxxxxxxx.
How many keys are on the keypad? 35, 46?
The winhex programme is usually used to transfer a programme from a PC to
the Terminal via the cradle..
The more information you can give the better.

Hope all this makes sense.
"Jibem" <jibemb@gmail.com> wrote in message
news:1155292109.523729.122860@i42g2000cwa.googlegroups.com...

Mark ha scritto:
[color=blue]
> Which Symbol terminal model do you have? It sounds from your cradle model
> that it may be a PDT684x series unit using the TN5250 as a dos based
> client.
>
> <jibemb@gmail.com> wrote in message
> news:1155049939.047714.98480@m79g2000cwm.googlegroups.com...[color=green]
> > Abbiamo un problema, non riesco a visualizzare il codice MAC sulla
> > pistola laser,
> > per interfacciare la pistola ho una culla cradle 6865, uso il sw winhxe
> > prego mi aiutate ha trovare il codice MAC sulla pistola eseguendo un
> > commando,
> > oppure con il sw?
> >
> > Cordiali saluti
> >
> > We have a problem, I don't succeed in visualizing the code MAC on
> > barcode scanner, for interfacciare the barcode I have a crib cradle
> > 6865, use the sw winhxe
> > do I pray you help me it has MAC find the code on the gun performing a
> > command,
> > or with the sw?
> >
> > Kindest regards
> >[/color][/color]

Ciao mio cradle è modello 3865, part.no. 59942-01-00, symbol
sn.M1H28H64K, FATTO IN MEXICO,
come ho scritto il Crandle non riesco a connetterlo, mi dire quale
programmi posso usare,
ho usato il programma WinHex non funziona, sei ha conoscenza di come
posso visualizzare
il numero MaC suulla barcode Scanner TN5250.

Cordiali saluti

Hi my cradle is model 3865, part.no. 59942-01-00, symbol sn.M1H28H64K,
made In
MEXICO, as I have written the Crandle I don't succeed in connecting it,
me
to say what programs I can use, I have used the program WinHex it
doesn't work,
you are it has knowledge of how the number I can visualize MaC my
barcode
Scanner TN5250.

Kindest regards