CAD Program(s) - OS2

This is a discussion on CAD Program(s) - OS2 ; Did this DOS program work under Warp? On Mon, 27 Oct 2008 22:56:24 -0500, Al Savage wrote: :>On Mon, 14 Jul 2008 22:18:36 UTC, "Elmer Fudd" :>wrote: :> :>> Which AutoCAD versions might run :>> under eCS, either natively, or ...

+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 21 to 25 of 25

Thread: CAD Program(s)

  1. Re: CAD Program(s)

    Did this DOS program work under Warp?

    On Mon, 27 Oct 2008 22:56:24 -0500, Al Savage wrote:

    :>On Mon, 14 Jul 2008 22:18:36 UTC, "Elmer Fudd"
    :>wrote:
    :>
    :>> Which AutoCAD versions might run
    :>> under eCS, either natively, or in a DOS window?
    :>
    :>I run ACAD v12/DOS under W4 FP17. I've never tried very hard to get my
    :>huge old Hitachi 1212E digitizing tablet to work with it, though.
    :>
    :>Admittedly, I probably haven't actually fired ACAD up in over two years,
    :>and I've switched away from the Matrox video driver since then, so I
    :>suppose it may not work now.




  2. Re: CAD Program(s)

    Willing to share the disks?

    On Tue, 28 Oct 2008 20:50:43 GMT, Pete wrote:

    :>On Tue, 28 Oct 2008 03:56:24 UTC, "Al Savage" wrote:
    :>
    :>> On Mon, 14 Jul 2008 22:18:36 UTC, "Elmer Fudd"
    :>> wrote:
    :>>
    :>> > Which AutoCAD versions might run
    :>> > under eCS, either natively, or in a DOS window?
    :>>
    :>> I run ACAD v12/DOS under W4 FP17. I've never tried very hard to get my
    :>> huge old Hitachi 1212E digitizing tablet to work with it, though.
    :>>
    :>> Admittedly, I probably haven't actually fired ACAD up in over two years,
    :>> and I've switched away from the Matrox video driver since then, so I
    :>> suppose it may not work now.
    :>
    :>I've been using ACAD v12 for years with Snap (currently on eCs 1.2R
    :>using an Asus M2NE mobo and an ATI Raedeon X300 graphics card). The only
    :>drawback is that whenever you change views, you have to regenerate the
    :>drawing. According to Steve at SciTech, this is a bug in IBM's GRADD
    :>driver, so I modified one of the buttons to regenerate the drawing. I
    :>have an old TI plotter, and it won't work correctly under Win-OS/2 (have
    :>to boot real DOS and run ACAD under W3.11).
    :>
    :>Pete
    :>
    :>--
    :>




  3. Re: CAD Program(s)

    On Tue, 28 Oct 2008 20:50:43 GMT, Pete wrote:

    :>On Tue, 28 Oct 2008 03:56:24 UTC, "Al Savage" wrote:
    :>
    :>> On Mon, 14 Jul 2008 22:18:36 UTC, "Elmer Fudd"
    :>> wrote:
    :>>
    :>> > Which AutoCAD versions might run
    :>> > under eCS, either natively, or in a DOS window?
    :>>
    :>> I run ACAD v12/DOS under W4 FP17. I've never tried very hard to get my
    :>> huge old Hitachi 1212E digitizing tablet to work with it, though.
    :>>
    :>> Admittedly, I probably haven't actually fired ACAD up in over two years,
    :>> and I've switched away from the Matrox video driver since then, so I
    :>> suppose it may not work now.
    :>
    :>I've been using ACAD v12 for years with Snap (currently on eCs 1.2R
    :>using an Asus M2NE mobo and an ATI Raedeon X300 graphics card). The only
    :>drawback is that whenever you change views, you have to regenerate the
    :>drawing. According to Steve at SciTech, this is a bug in IBM's GRADD
    :>driver, so I modified one of the buttons to regenerate the drawing. I
    :>have an old TI plotter, and it won't work correctly under Win-OS/2 (have
    :>to boot real DOS and run ACAD under W3.11).

    Have you tried Dos within VirtualBox?

    Mat Nieuwenhoven



  4. Re: CAD Program(s)

    On Wed, 29 Oct 2008 05:05:12 UTC, "Mat Nieuwenhoven"
    wrote:

    > On Tue, 28 Oct 2008 20:50:43 GMT, Pete wrote:
    >
    > :>On Tue, 28 Oct 2008 03:56:24 UTC, "Al Savage" wrote:
    > :>
    > :>> On Mon, 14 Jul 2008 22:18:36 UTC, "Elmer Fudd"
    > :>> wrote:
    > :>>
    > :>> > Which AutoCAD versions might run
    > :>> > under eCS, either natively, or in a DOS window?
    > :>>
    > :>> I run ACAD v12/DOS under W4 FP17. I've never tried very hard to get my
    > :>> huge old Hitachi 1212E digitizing tablet to work with it, though.
    > :>>
    > :>> Admittedly, I probably haven't actually fired ACAD up in over two years,
    > :>> and I've switched away from the Matrox video driver since then, so I
    > :>> suppose it may not work now.
    > :>
    > :>I've been using ACAD v12 for years with Snap (currently on eCs 1.2R
    > :>using an Asus M2NE mobo and an ATI Raedeon X300 graphics card). The only
    > :>drawback is that whenever you change views, you have to regenerate the
    > :>drawing. According to Steve at SciTech, this is a bug in IBM's GRADD
    > :>driver, so I modified one of the buttons to regenerate the drawing. I
    > :>have an old TI plotter, and it won't work correctly under Win-OS/2 (have
    > :>to boot real DOS and run ACAD under W3.11).
    >
    > Have you tried Dos within VirtualBox?


    I have VPC, so I haven't tried VirtualBox.

    > Mat Nieuwenhoven


    Oops! it's a Houston Instruments plotter, which I haven't used it for
    almost 10 years years because I no longer make C - E sized drawings (it
    was sort of fascinating to watch it do its thing). For printing/plotting
    these days, I print to a PS file, which must then be renamed from *.PRN
    before dropping it on my PS printer icon (or convert it to a PDF file).

    Pete

    --


  5. Re: CAD Program(s)

    On Tue, 28 Oct 2008 21:37:55 UTC, "Elmer Fudd"
    wrote:

    > On Mon, 27 Oct 2008 22:56:24 -0500, Al Savage wrote:
    > :>I run ACAD v12/DOS under W4 FP17.


    > Did this DOS program work under Warp?


    > :>I run ACAD v12/DOS under W4 FP17. !



+ Reply to Thread
Page 2 of 2 FirstFirst 1 2