Hi.

I can't quite figure this one out. We have a dell server with two
interfaces. One sits on a public IP and the second on a private one.
Routing is enabled and the machine can see the outside world
correctly.
What I can't figure out is why machines in the private network, using
the dell as a gw can't see the outside world. I believe that eth1 and
eth0 are not forwarding packets correctly but this is not something I
have seen before.

Any hints, tips or corrections will be appreciated.
Details:

[root@v ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1A:A0:14:E8:2B
inet addr:195.220.41.122 Bcast:195.220.41.127 Mask:
255.255.255.248
inet6 addr: fe80::21a:a0ff:fe14:e82b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

eth1 Link encap:Ethernet HWaddr 00:1A:A0:14:E8:2D
inet addr:10.0.0.10 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe80::21a:a0ff:fe14:e82d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0

[root@v ~]# cat /proc/sys/net/ipv4/ip_forward
1

[root@v ~]# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref
Use Iface
195.220.41.120 * 255.255.255.248 U 0 0
0 eth0
10.0.0.0 * 255.255.255.0 U 0 0
0 eth1
default 195.220.41.121 0.0.0.0 UG 0 0
0 eth0


Thanks in advance.
Alex